Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Keg lines cleaning
Reply
 
LinkBack Thread Tools
Old 01-10-2013, 02:37 PM   #1
rdbrett
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2012
Posts: 197
Liked 2 Times on 2 Posts
Likes Given: 3

Default Keg lines cleaning

My second batch I kegged. Trying to prepare for next batch, what do you recommend for a cleaning kit? I am using the plastic picnic tap, not the full flesged steel tap handle etc. i see kits on ebay for $50 or so. Do I need a pump that comes with these kits? Any help is appreciated. Thx

__________________
rdbrett is offline
 
Reply With Quote Quick reply to this message
Old 01-10-2013, 02:43 PM   #2
Ryfi
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2012
Location: Schenectady, Ny
Posts: 66
Liked 4 Times on 4 Posts

Default

I would suggest just taking the ball lock coupler and picnic tap apart and soaking it in a cleaning solution. Both the coupler and tap unscrew pretty easily. Those kits are more for cleaning lines you cant access. At this point i don't think you need to spend the money on a kit

__________________
Ryfi is offline
 
Reply With Quote Quick reply to this message
Old 01-10-2013, 02:56 PM   #3
rdbrett
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2012
Posts: 197
Liked 2 Times on 2 Posts
Likes Given: 3

Default

Thanks!

__________________
rdbrett is offline
 
Reply With Quote Quick reply to this message
Old 01-10-2013, 03:09 PM   #4
Golddiggie
HBT_SUPPORTER.png
Feedback Score: 1 reviews
 
Golddiggie's Avatar
Recipes 
 
Join Date: Dec 2010
Location: Between here and there, and everywhere
Posts: 12,058
Liked 478 Times on 420 Posts
Likes Given: 266

Default

IME, no need to get a specific kit to clean the keg and liquid side. I simply give the kicked keg a good rinse, then put 1-2 gallons of hot PBW solution in it. Shake the F out of it, then let it settle for a bit. Once it's ready, I run some through my liquid line (that the keg vacated) to clean. I then empty the keg out, rinse it out, put about a gallon of clear water in it and run a quart or two through the liquid side/line. Dump and pour 2-4 quarts of Star San into the keg. Swirl/shake to completely cover the keg insides, let sit for a few minutes, then run 1-2 quarts through the liquid side. Done without any additional hardware/kits.

I stopped using the picnic taps early on. I didn't like how they were prone to drip and were easy to open up if you were not extremely careful when setting them down. Went over to actual faucets (Perlick 525ss and 575ss) and haven't looked back. I'd consider using a picnic tap IF I'm taking a small keg (1 gallon) someplace.

__________________
Hopping Tango Brewery

跟猴子比丟屎 ・ Gun HOE-tze bee DIO-se

On Tap: Caramel Ale, Mocha Porter II, MO SMaSH IPA
Waiting/Carbonating: 12.5% Wee Honey II, 8.9% Old Ale, English Brown Ale, Lickah ESB, Mocha Porter II
Fermenting
K1:
K2: Epic mead
K3: TripSix
On Deck: Caramel Ale
Aging:mead
Mead [bottled]:Oaked Wildflower Traditional, Mocha Madness, Blackberry Melomel, maple wine
Golddiggie is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cleaning CO2 lines? homebrewbeliever Bottling/Kegging 2 09-05-2012 01:35 AM
Cleaning Tap Lines chriselgui Equipment/Sanitation 5 05-22-2012 03:48 PM
Cleaning Tap lines eager_brewer Equipment/Sanitation 9 09-11-2010 06:45 PM
Cleaning lines Auspice Bottling/Kegging 8 10-14-2009 03:44 AM
cleaning co2 lines bendavanza Bottling/Kegging 1 02-18-2009 06:12 PM