Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Instructions for first brew

Reply
 
LinkBack Thread Tools
Old 12-08-2011, 09:56 PM   #1
jrcomito
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Posts: 46
Likes Given: 9

Default Instructions for first brew

I wonder if someone could give a short list of first steps or maybe a link to somewhere I could find it.
For example:
1. Wash everything twice
2. Put water in pot
3. Turn on stove
Etc...

__________________
jrcomito is offline
 
Reply With Quote Quick reply to this message
Old 12-08-2011, 10:14 PM   #2
EdWort
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
EdWort's Avatar
Recipes 
 
Join Date: Jul 2006
Location: Bee Cave, Texas
Posts: 11,968
Liked 255 Times on 136 Posts
Likes Given: 7

Default

You always want to check out the "sticky" threads at the top of each forum section. You will find what you are looking for there and more.

http://www.homebrewtalk.com/f39/begi...g-howto-99139/

EdWort is offline
 
Reply With Quote Quick reply to this message
Old 12-08-2011, 10:16 PM   #3
unionrdr
Wannabe author
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
unionrdr's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Sheffield, Ohio
Posts: 27,990
Liked 1855 Times on 1635 Posts
Likes Given: 1329

Default

Well,you have to follow the recipe for the particular beer style you're brewing,1st of all. It's typically the times they list that are incorrect. But,basically,for apartial boil;
1) Get 2.5-3 gallons of water boiling in at least a 5G brew kettle. Preferably stainless steel. On my electric stove,that's wide open.
2) While that's getting going,measure out your hop additions into bowls &/or hop sacks/grain bags. Depending on pellet or whole leaf.
If using,say,a cooper's can with DME,then measure out half the DME (if multiple pounds are used) with a digital scale.
3) Make sure FV & anything that touches the beer is clean & sanitized.
4) When water boils (NO LID!),add the measured half of the DME,stiring to dissolve all clumps. There will be a mini hot break for a couple minutes. Unless you added wheat DME,then a big nasty one that'll need to be stirred down for 3 minutes or so.
5) Once that's done,Make you're hop additions. Keep the pot stirred up to where it's moving around all the time. I don't get scortching that way.
6) Once all hop additions are done & timer runs out,take the BK off the heat.
Add remaining DME,& all the can of LME. Rinse the can with some boiled water into the BK to get all the goodness. Stir the wort till no clumps of DME or no LME can be scraped off the bottom. Put a lid on the BK for 10-15 minutes so the heat can sanitize it.
7) Place the BK of wort in the sink,filling the empty spaces with ice,then top off with water. Use a thermometer to tell when the wort is chilled down to 65-70F. Put fermenter where it's going to sit,then place fine mesh strainer over the open fermenter & pour the wort & top off water through that. It'll aerate nicely,& strain out hops or grainy stuff at the same time. Stir the wort/top off water for 5 minutes solid to mix it well,& I mean stir roughly.
Take hydrometer sample,pitch yeast,seal & add airlock.
That's pretty much it for one way of brewing with both types of extract.
__________________
Everything works if ya let it-Roady(meatloaf)
My new book is on Amazon Kindle! http://www.amazon.com/dp/B00L3MCU0W
unionrdr is offline
 
Reply With Quote Quick reply to this message
Old 12-08-2011, 10:31 PM   #4
kh54s10
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: Tiverton, Rhode Island
Posts: 6,494
Liked 572 Times on 487 Posts
Likes Given: 156

Default

Check out the extract recipe kits information on Northern Brewer's website.
Here is a link to their recipe instruction for their Extra Pale Ale.
http://www.northernbrewer.com/docume...traPaleAle.pdf

You can check out a recipe similar to what you want to brew and look for the "additional information" tab. Then under recipe and instructions there is a "click here!" this will give you a page with pretty good step by step instructions.

__________________
kh54s10 is offline
 
Reply With Quote Quick reply to this message
Old 12-08-2011, 10:46 PM   #5
Brewnoob1
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Brewnoob1's Avatar
Recipes 
 
Join Date: Sep 2011
Location: Puyallup, WA
Posts: 982
Liked 23 Times on 23 Posts
Likes Given: 8

Default

Youtube has a bunch of informational How-To brew extract as well. Lots at your disposal. I, myself, like vids as a first step just to get the gyst of it. Then move into reading so that what you're reading actually makes some sense. Vids also go over basic terminology...typically anyways.

__________________

Keg #1: Empty :(
Keg #2: Empty :(
Kegs 3-5: Empty :(

Ferment #1: Empty :(
Ferment #2: Empty :(
Ferment #3: Empty :(

On Deck: Something....Anything!!!

Brewnoob1 is offline
 
Reply With Quote Quick reply to this message
Old 12-08-2011, 10:51 PM   #6
birvine
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Cochrane, Ontario, CANADA
Posts: 1,512
Liked 10 Times on 10 Posts
Likes Given: 4

Default

Quote:
Originally Posted by Brewnoob1 View Post
Youtube has a bunch of informational How-To brew extract as well. Lots at your disposal. I, myself, like vids as a first step just to get the gyst of it. Then move into reading so that what you're reading actually makes some sense. Vids also go over basic terminology...typically anyways.
Yes, yt is very good for our hobby. At every stage from noob to very advanced.

B
__________________
Manager & Head Brewer
Swan Lane Brewery
birvine is offline
 
Reply With Quote Quick reply to this message
Old 12-29-2011, 06:54 PM   #7
jrcomito
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Posts: 46
Likes Given: 9

Default

Thanks guys for the advice. We brewed a pale ale from True Brew about 36 hours ago. Can't wait!

__________________
jrcomito is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools