Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > hydrometer reading....
Reply
 
LinkBack Thread Tools
Old 04-09-2009, 04:15 AM   #1
cghinds
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2009
Location: Columbus Ga
Posts: 35
Default hydrometer reading....

So I brewed a true brew red ale kit tonight but I was adding to it and think I may have screwed the pooch if you know what I mean.

1st. I cooled my Wort for about an hour and a half I added it to the fermenting bucket where I cooled it a little more with some cold water from the tap... thinking that was cool enough (and having a few to many HB's) I pitched my yeast. My wife being the sober one in the family checked on it for me while I was cleaning up. She thought it was to warm.

2nd. when I took a hydrometer reading it read well over 1.170 which is the final number on my hydrometer. The hydrometer reading was taken after the wort was added to 3 gallons of cool water.

So here's what I did, I used everything in the True brew kit
Hopped Light Malt Extract (1 can)
Unhopped Light Malt Extract (1 can)
Melanoidin Malt Grain (4 oz)
Grain Steeping Bag
Hop Pellets (1 oz)
Nottingham lg pack
Priming Sugar (5 oz)

on top of this I added a 3/4 pound of muntons extra light.
and a pound of Honey...

I did my boil as normal but I added the honey and the mutons late in the boil (the last 3 min) I also added my priming sugar to the boil (as suggested by my LHBS owner)

should I be concerned about
A) the temp at the time I pitched
or (B) the Hydrometer reading

__________________

cghinds is offline
 
Reply With Quote Quick reply to this message
Old 04-09-2009, 04:25 AM   #2
Nurmey
I love making Beer
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Nurmey's Avatar
Recipes 
 
Join Date: Jul 2007
Location: Omaha, NE
Posts: 4,001
Liked 29 Times on 25 Posts
Likes Given: 6

Default

I doubt your water was too hot or you would have felt it. It takes 120° or above to hurt your yeast. Nottingham is a very tolerant yeast but get get your brewed cooled down soon.

Your hydrometer was probably off due to lack of mixing wort and top off water thoroughly. It takes a lot of shaking to get the heavier wort and water mixed.

__________________
Batch 1 Brewing
The American Revolution would never have happened with gun control.
Nurmey is offline
 
Reply With Quote Quick reply to this message
Old 04-09-2009, 04:25 AM   #3
oswiu
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2008
Location: Wellington, NZ
Posts: 91
Liked 3 Times on 3 Posts

Default

Re: the wort temp

As long as your wort was no more than about 90-100, and so long as it cooled down to 70 or so soon afterwards you should be fine. If it was much above 100 when you pitched you may have killed the yeast and might need to add more.

If the wort was up around 80 when you pitched and it stays that warm during fermentation you'll end up with drinkable beer, but it will probably have some off flavours (esters, giving banana-y taste and smell; fusel alcohols giving a "hot alcohol" aspect to your beer and leading to hangovers.)

Re: the hydrometer reading:
That sounds like a very high reading for those ingredients and a 5gal batch, but a bit more info is needed to answer your questions conclusively.

1. What was the volume of wort when you measured the OG?
2. Did you add any more water to it afterwards?

EDIT: Ah, yeah, Nurmey's explanation for the high hydrometer sounds like the most likely one

__________________
Primary: Beast of Burden hoppy porter/black IPA
Secondary: Nothing
Bottle Conditioning: Nothing
Drinking: Buff Face Imperial Stout, Cria (2.X% ABV hop bomb), Llama Doodle NZ hopped IPA

oswiu is offline
 
Reply With Quote Quick reply to this message
Old 04-09-2009, 04:29 AM   #4
Stratotankard
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Stratotankard's Avatar
Recipes 
 
Join Date: Dec 2007
Location: Jacksonville, AR
Posts: 662
Liked 6 Times on 2 Posts

Default

Just looking at the recipe I can tell you there's no way that 1.170 is a good reading. I'm guessing that your wort was not well mixed. It takes a few minutes of good stirring to get a good mix.

As far as you pitching temp goes, not having a actual temp makes that difficult. an hour and a half is a fairly long time to cool, were you using an ice water bath or anything, or just letting it sit in the boil pot covered with no external cooling? I'd recommend buying a Fermometer stick-on temperature strip for a few bucks to be sure next time, but the worst that will probably happen this time is a few off flavours from the high pitching temp (if it was). If it was WAY too high, you may have killed off your yeast, but I'm thinking that is unlikely. Give it at least 48 hours before you start worrying too much. If you haven't seen any activity by then, you might consider picking up a new pack of yeast and re-pitching.

Terje

__________________

---------------------------------------------
Primary: Burned Mead
Secondary: Bourbon Barrel Porter
Bottled: More Bourbon Barrel Porter, New Pekin Common, Flat Tail Old Ale, Bad Monkey Banana Wine, Flanders Red, Pumpkin Ale
Drinking: Too Much
On deck: Something crazy to use up the 3+ pounds of hops sitting in my freezer

Stratotankard is offline
 
Reply With Quote Quick reply to this message
Old 04-09-2009, 04:30 AM   #5
carnevoodoo
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2007
Location: San Diego, CA
Posts: 4,305
Liked 13 Times on 12 Posts
Likes Given: 5

Default

Quote:
Originally Posted by oswiu View Post
Re: the wort temp

As long as your wort was no more than about 75-80, and so long as it cooled down to 70 or so soon afterwards you should be fine. If it was above 80 or so when you pitched you may have killed the yeast and might need to add more.
Yeast can live at 100+, but you're going to stress the hell out of them. Pitching too hot is really not good for alcohol production, but they'll likely live.
__________________
http://chugsd.com
carnevoodoo is offline
 
Reply With Quote Quick reply to this message
Old 04-09-2009, 04:34 AM   #6
oswiu
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2008
Location: Wellington, NZ
Posts: 91
Liked 3 Times on 3 Posts

Default

Quote:
Originally Posted by carnevoodoo View Post
Yeast can live at 100+, but you're going to stress the hell out of them. Pitching too hot is really not good for alcohol production, but they'll likely live.
Yup, that's right... messed up my C to F conversion while I was working that out
__________________
Primary: Beast of Burden hoppy porter/black IPA
Secondary: Nothing
Bottle Conditioning: Nothing
Drinking: Buff Face Imperial Stout, Cria (2.X% ABV hop bomb), Llama Doodle NZ hopped IPA
oswiu is offline
 
Reply With Quote Quick reply to this message
Old 04-09-2009, 04:42 AM   #7
cghinds
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2009
Location: Columbus Ga
Posts: 35
Default

I didnt cool my wort with an Ice bath or anything like that it was cooled in the boiling pot with a lid on it.

__________________
cghinds is offline
 
Reply With Quote Quick reply to this message
Old 04-09-2009, 04:45 AM   #8
rtichota
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Centennial, CO
Posts: 51
Default

While we're on the subject, how do you guys stir your wort after you've added water to a carboy?

__________________
rtichota is offline
 
Reply With Quote Quick reply to this message
Old 04-09-2009, 05:40 AM   #9
D1sorder
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2009
Location: Lynchburg, VA
Posts: 34
Default

Your LHBS suggested adding your priming sugar to your wort?

__________________
D1sorder is offline
 
Reply With Quote Quick reply to this message
Old 04-09-2009, 06:29 AM   #10
lapaglia
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2008
Location: Denver, Colorado
Posts: 511
Liked 4 Times on 4 Posts

Default

Quote:
Originally Posted by D1sorder View Post
Your LHBS suggested adding your priming sugar to your wort?
They sell more priming sugar that way. Now he has to go back and get more
__________________
Primary: 3 gallon cider S-04
Secondary: Valentine Apfelwein Clone 1 Gal
Bottled: Halloween Apfelwein Clone 1 Gal
On Deck: 90 Shilling Clone
lapaglia is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hydrometer reading Brewno Beginners Beer Brewing Forum 16 01-29-2013 04:23 AM
1.000 hydrometer reading?? arcto Beginners Beer Brewing Forum 16 08-04-2009 02:34 PM
Too soon to take a Hydrometer reading? ohill1981 Beginners Beer Brewing Forum 13 12-11-2008 07:45 PM
Is it OK to take a hydrometer reading yet? BrewinHog Beginners Beer Brewing Forum 11 10-24-2008 05:49 AM
Hydrometer Reading? RonRock Beginners Beer Brewing Forum 2 10-06-2008 02:59 PM