HBT 2014 Big Giveaway - 4/10 Re-Draw Winners Posted!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > High OG




Reply
 
LinkBack Thread Tools Display Modes
Old 06-15-2011, 08:49 PM   #1
Spike1vista
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: Long beach, Ca
Posts: 5
Default High OG

I'm a noobie but I am getting really high OG's and I don't know why. The last two batches (I have done probably 10 batches) have had really high OG. They have had .02 above what it is supposed to be. Tested the hydrometer and it is accurate so looking for suggestions. Reading was done around 80 degrees. Remember, I'm a noob, don't chop my head off. Thanks!



__________________
Spike1vista is offline
 
Reply With Quote Quick reply to this message
Old 06-15-2011, 08:51 PM   #2
RighteousFire
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Jacksonville, NC
Posts: 224
Liked 2 Times on 2 Posts
Likes Given: 1

Default

Describe your process (details help) and we can help figure out if anything seems out of ordinary.



__________________

Cheers.

RighteousFire is offline
 
Reply With Quote Quick reply to this message
Old 06-16-2011, 03:59 AM   #3
nilo
Feedback Score: 0 reviews
 
nilo's Avatar
Recipes 
 
Join Date: Aug 2009
Location: Seattle, WA
Posts: 707
Liked 23 Times on 20 Posts

Default

Extract or All grain? The two batches that came out high, have you brewed the same recipe before and came out at lower OG?
Have you changed anything, pot size, or the way you measure volumes?
Have you changed the software you use to calculate your recipes, in case you use a software?

__________________
nilo is offline
 
Reply With Quote Quick reply to this message
Old 06-16-2011, 04:17 AM   #4
Spike1vista
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: Long beach, Ca
Posts: 5
Default

It was an extract. I have brewed the pale ale before with not so high OG. All equipment is the same.

__________________
Spike1vista is offline
 
Reply With Quote Quick reply to this message
Old 06-16-2011, 04:18 AM   #5
Spike1vista
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: Long beach, Ca
Posts: 5
Default

I also don't use software

__________________
Spike1vista is offline
 
Reply With Quote Quick reply to this message
Old 06-16-2011, 05:37 AM   #6
jkatz419
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Studio City, CA
Posts: 79
Likes Given: 1

Default

Can you describe the ingredients you use and the batch size? For instance 7lb of liquid extract, and some specialty grains making a 5 gallon batch. That'll help determine the approximate OG of what to expect, it may be that your using way too much extract/malt/sugar for the size batch you are making. Maybe you are doing a partial boil and not diluting with water post boil?

__________________
jkatz419 is offline
 
Reply With Quote Quick reply to this message
Old 06-16-2011, 11:44 AM   #7
bonzombiekitty
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2009
Location: Philadelphia
Posts: 530
Liked 6 Times on 6 Posts

Default

If your end volumes are on target, it's pretty much impossible to be off from the OG of an extract recipe. Gravity is a measurement of the amount of sugar dissolved in the water. Extract only has a certain amount of sugar in it, and you only have a certain amount of water, so there's really not any factors that can change in that regard (unlike all grain where the amount of sugar you get out of an amount of grain can vary, sometimes wildly).

So my guess is that one of two things is happening:

- You are ending up with a smaller volume than usual, either due to not adding enough top-up water and/or boiling off more water than you usually do.

-If you are adding top-up water, you just simply didn't mix it up enough and managed to take a sample from a spot in the wort that had a higher concentration of sugar.

__________________
bonzombiekitty is offline
 
Reply With Quote Quick reply to this message
Old 06-16-2011, 12:28 PM   #8
unionrdr
Gotta home brew jones
Feedback Score: 0 reviews
 
unionrdr's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Sheffield, Ohio
Posts: 26,523
Liked 1656 Times on 1462 Posts
Likes Given: 1129

Default

for one thing 80F is too high for an accurate reading. I do mine from 67F-72F max. I've also seen this happen on here when noobs use Cooper's kits (23L or 6G),then only top off to 5G when it's supposed to be topped off to 6G. So the OG would be high. Maybe that's it?
__________________
Everything works if ya let it-Roady(meatloaf)
unionrdr is offline
 
Reply With Quote Quick reply to this message
Old 06-16-2011, 03:48 PM   #9
Spike1vista
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: Long beach, Ca
Posts: 5
Default

Im starting to think that when I topped -up to 5 gallons I didn't mix well. Or maybe i pulled from just the wort and not the mix of water and wort. That makes sense to me now. Thanks!

__________________
Spike1vista is offline
 
Reply With Quote Quick reply to this message
Old 06-16-2011, 03:53 PM   #10
Revvy
Post Hoc Ergo Propter Hoc
Feedback Score: 0 reviews
 
Revvy's Avatar
Recipes 
 
Join Date: Dec 2007
Location: "Detroitish" Michigan
Posts: 40,774
Liked 2657 Times on 1602 Posts
Likes Given: 3444

Default

We get this question every day

It's a pretty common issue for ANYONE topping off with water in the fermenter (and that includes partial mashes, extract or all grain revcipes) to have an error in reading the OG...In fact, it is actually nearly impossible to mix the wort and the top off water in a way to get an accurate OG reading...

Brewers get a low reading if they get more of the top off water than the wort, conversely they get a higher number if they grabbed more of the extract than the top off water in their sample.

When I am doing an extract with grain recipe I make sure to stir for a minimum of 5 minutes (whipping up a froth to aerate as well) before I draw a grav sample and pitch my yeast....It really is an effort to integrate the wort with the top off water...This is a fairly common new brewer issue we get on here...unless you under or over topped off or the final volume for the kit was 5 gallons and you topped off to 5.5, then the issue, sorry to say, is "operator error"

More than likely your true OG is really what it's supposed to be. And it will mix itself fine during fermentation.



__________________

Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

Revvy is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes