New Giveaway - Wort Monster Conical Fermenter!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Help with water profile




Reply
 
LinkBack Thread Tools Display Modes
Old 04-18-2012, 03:13 PM   #1
flatrockbrewing
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Near Holgate Ohio, ohio
Posts: 107
Liked 4 Times on 3 Posts

Default Help with water profile

We do not have a RO system and RO water is about $4 per 5 gallon bottle in my area. What beers would do well with my local water profile with the minimum amount of dilution?

pH 8.3
Total Dissolved Solids (TDS) Est, ppm 660
Electrical Conductivity, mmho/cm 1.10
Cations / Anions, me/L 12.0 / 11.9
ppm
Sodium, Na 170
Potassium, K 4
Calcium, Ca 27
Magnesium, Mg 38
Total Hardness, CaCO3 226
Nitrate, NO3-N 0.1 (SAFE)
Sulfate, SO4-S 114
Chloride, Cl 85
Carbonate, CO3 6
Bicarbonate, HCO3 132
Total Alkalinity, CaCO3 118
Total Phosphorus, P 0.37
Total Iron, Fe < 0.01
"<" - Not Detected / Below Detection Limit

I believe the sulfate is 342? Which we know is really high.



__________________

Lawrence Pritchard III
Flatrock Brewing and Grainery
www.flatrockbrewery.com

flatrockbrewing is offline
 
Reply With Quote Quick reply to this message
Old 04-18-2012, 03:21 PM   #2
Nateo
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2010
Location: Bennett Springs, MO
Posts: 2,055
Liked 36 Times on 29 Posts
Likes Given: 35

Default

That water is pretty bad for brewing. High sodium, high magnesium, high sulfate, low calcium.

Hoppy beers might be OK (like a Burton Pale), but the high magnesium coupled with high sulfate will exaggerate "harsh" bitterness.



__________________

To paraphrase Dr. England - "Off-flavors smooth with time. So do mountains. Brew it right from the start!"

My blogsite: http://nateobrew.blogspot.com/

Nateo is offline
 
Reply With Quote Quick reply to this message
Old 04-18-2012, 04:10 PM   #3
40watt
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
40watt's Avatar
Recipes 
 
Join Date: Mar 2011
Location: , ok
Posts: 608
Liked 60 Times on 30 Posts
Likes Given: 18

Default

Go look at the sticky in brew science. You seem like another brewer who would benefits from using AJ's baseline adjustments for RO water.

I discarded my tap water for RO, and the results are impressive.

While it us another expense, It's worth it for me. I have to use RO even for mixing Star San. Otherwise, I get cloudy, slimy, useless Star San.

__________________
40watt is offline
 
Reply With Quote Quick reply to this message
Old 04-18-2012, 11:56 PM   #5
flatrockbrewing
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Near Holgate Ohio, ohio
Posts: 107
Liked 4 Times on 3 Posts

Default

Just curious if we could at least have a English style pale ale with a lower dilution rate.



__________________

Lawrence Pritchard III
Flatrock Brewing and Grainery
www.flatrockbrewery.com

flatrockbrewing is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
How good is my water profile? JoePro Beginners Beer Brewing Forum 6 05-20-2011 12:08 AM
Cream ale water profile JBrady Beginners Beer Brewing Forum 3 05-10-2011 03:28 PM
Water profile for a Rye IPA? JBrady Beginners Beer Brewing Forum 9 06-01-2010 01:57 AM
help with water profile martinworswick Beginners Beer Brewing Forum 2 04-21-2009 05:51 AM
water profile analysis williec30 Beginners Beer Brewing Forum 6 02-24-2009 08:48 PM