Happy HolidaySs Giveaway - Last Sponsor Giveaway of the Year!

Come Enter the BrewDeals/FastFerment Giveaway!


Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Floaty Bits
Reply
 
LinkBack Thread Tools
Old 09-11-2012, 08:11 AM   #1
Boydo
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Posts: 27
Likes Given: 1

Default Floaty Bits

I removed the Krausen Kollar today, this is my first batch of brew ever so I am a completely new to this. There was a lot of floating bits in the mix and I am worried that this primary fermentation has not happened. There is sediment on the bottom. The temperature daily has been hovering between 14 and 18 degrees Celsius. Murphy's law we get a cold snap as soon as Started this batch. Has the temp been to low ( bearing in mind that the temp in the vessel has hopefully been 2/3 degrees higher than above. How do I know that is has not worked?

__________________
Boydo is offline
 
Reply With Quote Quick reply to this message
Old 09-11-2012, 08:46 AM   #2
ggoodman
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2009
Location: Juneau Alaska
Posts: 166
Liked 1 Times on 1 Posts
Likes Given: 1

Default

So let me get this strait to scooped of the krausen in the primary fermentation vessel. if you did this... dont ever do it again. if not let it be.

Wouldn't worry about the drop in temp, just leave it be. Let it sit for at least a week. then check the gravity if your that concerned.

more info on what and how you brewed plus your equipment would help us help you.


Cheers

__________________

Fly Casters Brewing

"Aint nothing better than Fishing and Brewing Beer"

ggoodman is offline
 
Reply With Quote Quick reply to this message
Old 09-11-2012, 09:42 AM   #3
Boydo
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Posts: 27
Likes Given: 1

Default

Quote:
Originally Posted by ggoodman
So let me get this strait to scooped of the krausen in the primary fermentation vessel. if you did this... dont ever do it again. if not let it be.

Wouldn't worry about the drop in temp, just leave it be. Let it sit for at least a week. then check the gravity if your that concerned.

more info on what and how you brewed plus your equipment would help us help you.

Cheers
Thanks ggoodman, right so this was my first brew ever so I am using the Coopers home brew starter kit. So it's a 23Lt plastic fermentation vessel and I am brewing lager, using the Coopers Lager beer kit and their Enhancer 1. I only removed the Krausen Kollar cause the instructions said to. So how long do you recommend I should leave the Kollar in the vessel for future brews?
__________________
Boydo is offline
 
Reply With Quote Quick reply to this message
Old 09-11-2012, 10:20 AM   #4
GilSwillBasementBrews
HBT_SUPPORTER.png
Feedback Score: 1 reviews
 
GilSwillBasementBrews's Avatar
Recipes 
 
Join Date: Jul 2012
Location: Eagleville, Pennsylvania
Posts: 2,117
Liked 161 Times on 133 Posts
Likes Given: 23

Default

For lagers you might want to try keeping your fermenter slightly cooler. Depending on your yeast as they vary in optimal range but most usually stay around 7-13*C. Try putting the fermenter in a cool place or use a swamp cooler. It's just a tub with water in it. People will cool it by sticking frozen water bottles in the water around the carboy/bucket and change them out 2-3times a day as needed.

__________________

Beer Plus Science = .....Good!!!!! By: Adam Savage

GilSwillBasementBrews is offline
 
Reply With Quote Quick reply to this message
Old 09-11-2012, 10:24 AM   #5
RatsoRizzo
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2012
Location: , Stockholm, Sweden
Posts: 50
Liked 17 Times on 5 Posts
Likes Given: 3

Default

Quote:
Originally Posted by Boydo View Post
Thanks ggoodman, right so this was my first brew ever so I am using the Coopers home brew starter kit. So it's a 23Lt plastic fermentation vessel and I am brewing lager, using the Coopers Lager beer kit and their Enhancer 1. I only removed the Krausen Kollar cause the instructions said to. So how long do you recommend I should leave the Kollar in the vessel for future brews?
You have the Coopers fermenter I suppose so you were right to remove the collar. The first response to your post assumed you skimmed off the krausen foam which would have been wrong.
__________________
RatsoRizzo is offline
 
Reply With Quote Quick reply to this message
Old 09-11-2012, 10:42 AM   #6
Boydo
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Posts: 27
Likes Given: 1

Default

Thanks for the advice above guys. While I'm on the subject of Krausen Kollars, I may have just made a big mistake. I accidentally cleaned the Kollar with a scouring cloth. I know you have to clean the equipment with a non scratch cloth but it just slipped my mind and I started to clean it. There visible light scratches around the Kollar now. So can I still use it or should I just throw it out and try find a new one without having to buy a whole new kit.

__________________
Boydo is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools




Newest Threads

LATEST SPONSOR DEALS