New Giveaway - Wort Monster Conical Fermeneter!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Equipment placement after sanitation?




Reply
 
LinkBack Thread Tools Display Modes
Old 08-16-2011, 03:16 PM   #1
BlackLabBrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: Bedford, Texas
Posts: 2
Default Equipment placement after sanitation?

I'm a newbie brewer. On brewing/bottling day, what do you guys do with your equipment (racking cane, hoses, airlock, stopper, etc.) after you sanitize it?

I use StarSan and you are supposed to let it dry before you use it. Are you supposed to let it dry on a clean counter, clean bath towel, clean paper towel?
Are you supposed to sanitize the counter you are placing it on to dry?

Thanks for your help.



__________________
BlackLabBrew is offline
 
Reply With Quote Quick reply to this message
Old 08-16-2011, 03:26 PM   #2
unionrdr
Gotta home brew jones
Feedback Score: 0 reviews
 
unionrdr's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Sheffield, Ohio
Posts: 26,555
Liked 1658 Times on 1464 Posts
Likes Given: 1132

Default

Letting the star-san dry before using it is counter productive. It has to be wet to sanitize.


__________________
Everything works if ya let it-Roady(meatloaf)
unionrdr is online now
 
Reply With Quote Quick reply to this message
Old 08-16-2011, 03:30 PM   #3
shawnbou
Zyme Lord
Feedback Score: 0 reviews
 
shawnbou's Avatar
Recipes 
 
Join Date: Mar 2009
Location: Austin, Texas
Posts: 539
Liked 22 Times on 20 Posts
Likes Given: 44

Default

I use StarSan and I never let it dry before using it. Everything I've read on using it properly says it should be drained, but not dried. I read that to mean you don't want a visible volume of it in your fermenter when you rack wort onto it, but foam and wet surfaces are fine. In fact, if something does get completely dry, I'll usually spray it again. And I've been very happy with the results.

The wet film it leaves is actually supposed to form a protective barrier on equipment to protect it from wild contaminants in the air. I also find that the StarSan film is an excellent lubricant for getting airlocks into bungs, racking canes into hoses, etc. And if the reports are to be believed, diluted StarSan breaks down into yeast nutrient, so having some of it in your wort/beer is not a bad thing.

However, if I need to take something out of StarSan for a minute or two before using it, or spray it and let it sit for a minute to sanitize, I will put it on a sanitized plate, paper towel, or piece of foil.

LOL unionrdr you beat me again! I need to learn to type faster.

__________________

Read my brewing blog here! Last of the Zyme Lords

BOUSIRIS BOUERY - Home of the Zyme Lord
The cans of Leinenkugel's had masking tape on them with JOHN'S printed in ink. Amy looked around me and said, "John is protective about his beer, isn't he?"
"I put that label on there. When company comes I want them to know the Leinie's is his, not mine."
- David Wong

On Tap:
Anna Livia Irish Stout
Gondor IPA
Melancholy Bill's Infinitely Sad Pumpkin Ale
Lucian's Landing Ginger Metheglin

shawnbou is offline
 
Reply With Quote Quick reply to this message
Old 08-16-2011, 03:32 PM   #4
onipar
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Tannersville, PA
Posts: 1,229
Liked 10 Times on 10 Posts
Likes Given: 19

Default

Star San is most effective when left wet on the equipment. So you'll want to spray it down (or dunk it), wait at least 1 minute, then use the equipment while still wet. Since I use a spray bottle, I'll just give an extra spritz if it looks like it was drying before I had a chance to use it.

As for where I put my stuff: I usually leave it all in a bucket--either the bucket I'm going to use for my primary, or the bottling bucket, or an extra bucket if need be. That way all the extra star san collects at the bottom, and I can switch it around in the bucket to resanitize before putting my wort in.

Here's another option (that's not me):

onipar is offline
 
Reply With Quote Quick reply to this message
Old 08-16-2011, 03:33 PM   #5
unionrdr
Gotta home brew jones
Feedback Score: 0 reviews
 
unionrdr's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Sheffield, Ohio
Posts: 26,555
Liked 1658 Times on 1464 Posts
Likes Given: 1132

Default

I'm a two finger flyer!
__________________
Everything works if ya let it-Roady(meatloaf)
unionrdr is online now
 
Reply With Quote Quick reply to this message
Old 08-16-2011, 03:42 PM   #6
Seb
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: Montreal, Quebec
Posts: 93
Liked 1 Times on 1 Posts
Likes Given: 1

Default

Quote:
Originally Posted by onipar View Post
Here's another option (that's not me):

http://www.youtube.com/watch?v=qC7o7Au_vnY
Not sure about the tubes, won't the air inside make it impossible for the sanitizer to get in?

Just like when you put a bowl upside down into a sink will with water, the air won't be able to escape from it until you turn it the other side.

This would most likely keep all the unwanted bacteria inside the tubes.
__________________
Seb is offline
 
Reply With Quote Quick reply to this message
Old 08-16-2011, 03:56 PM   #7
onipar
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Tannersville, PA
Posts: 1,229
Liked 10 Times on 10 Posts
Likes Given: 19

Default

Quote:
Originally Posted by Seb View Post
Not sure about the tubes, won't the air inside make it impossible for the sanitizer to get in?

Just like when you put a bowl upside down into a sink will with water, the air won't be able to escape from it until you turn it the other side.

This would most likely keep all the unwanted bacteria inside the tubes.
I don't know, I've never used the thing in the video. Just something I found a while back while watching brewing stuff on youtube.

As for myself, I usually siphon star san *through* the tubes to sanitize the insides, so once that's done it doesn't matter where I place it to hold for use. But as I said earlier, I put my stuff in a bucket. From what i can tell that's how the guy in the video uses that trough, just a place to put the already sanitized stuff (I think?).

EDIT: also for other tubes (that aren't attached to the auto-siphon) I just spray star san right in with my spray bottle. Works perfect.
__________________
Bad Wolf Brewing Co.

My Official Website

Horror and Homebrew: YouTube Channel

My Books:
Soundtrack to the End of the World
Welcome to Moon Hill
onipar is offline
 
Reply With Quote Quick reply to this message
Old 08-16-2011, 03:57 PM   #8
BryceL
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Yorba Linda, CA
Posts: 867
Liked 29 Times on 24 Posts

Default

Quote:
Originally Posted by Seb View Post
Not sure about the tubes, won't the air inside make it impossible for the sanitizer to get in?

Just like when you put a bowl upside down into a sink will with water, the air won't be able to escape from it until you turn it the other side.

This would most likely keep all the unwanted bacteria inside the tubes.
For tubes, I stick them in my bucket of sanitizer and then hold one end near the to and pull the rest of the tubing through my hand near the bottom of the bucket to push the air out. My other method is to suck the sanitizer through with my mouth and then be sure to sanitize that end well. Just don't spit any liquid that might end up back into your bucket
__________________
BryceL is offline
 
Reply With Quote Quick reply to this message
Old 08-16-2011, 04:02 PM   #9
unionrdr
Gotta home brew jones
Feedback Score: 0 reviews
 
unionrdr's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Sheffield, Ohio
Posts: 26,555
Liked 1658 Times on 1464 Posts
Likes Given: 1132

Default

I rinse the off with tap water,then put one end in my homer cheapo bucket,& the other in the stream of tap water. Blow out the inside. When all that's done,if it's dirty,I'll get my cheapy store funnel & stick one end of the tube on it. Pour PBW into the hose (again,the rest coiled up in the bottom of a home cheapo bucket) till it's full. Pop the funnel off,& lay it in the bucket covered with PBW.
Then just rinse'em in the sink & put them away.
__________________
Everything works if ya let it-Roady(meatloaf)
unionrdr is online now
 
Reply With Quote Quick reply to this message
Old 08-16-2011, 04:02 PM   #10
BlackLabBrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: Bedford, Texas
Posts: 2
Default

StarSan says "For all applications, allow to air dry, however surfaces must remain wet for at least one minute".

It says this on the back of the bottle. So why in the world would you leave it wet?



__________________
BlackLabBrew is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stick-on (liquid crystal?) thermometer placement HopEd Beginners Beer Brewing Forum 9 09-08-2011 05:03 PM
sanitation Tizzomes Beginners Beer Brewing Forum 4 04-09-2011 05:25 PM
Question: What is the best placement for a thermometer in a brewpot? odie313 Beginners Beer Brewing Forum 1 12-26-2010 09:00 PM
Sanitation daveooph131 Beginners Beer Brewing Forum 13 08-23-2009 02:33 AM
Sanitation? bluefoxicy Beginners Beer Brewing Forum 32 08-26-2008 11:50 PM