Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Electric vs. Gas

Reply
 
LinkBack Thread Tools
Old 12-26-2005, 06:22 PM   #1
Atticmonkey
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2005
Location: La Salle, IL
Posts: 114
Default Electric vs. Gas

Hey all,
Hope everyone had a good holiday. I was just wondering if there is any advantages over using gas heat during the boil then using electric heat? My preference would be to use gas but in the basement where I will be brewing I will not have access to a gas burner. So my plan is to use an electric hotplate for the brewing. Anybody have any experince with this type of setup? Anything I should watch out for? Thanks.

Jason

__________________
Atticmonkey is offline
 
Reply With Quote Quick reply to this message
Old 12-26-2005, 06:32 PM   #2
Rookie
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2005
Location: Vancouver, WA
Posts: 211
Default

How large a batch are you doing?
I do three gallon batches on the kitchen stove and they take a while to get to the boil. It would take forever to boil even a modest size batch on a hot plate.
Gas is the way to go on large batches, but I don't think it is a very good idea in a basement.

__________________

Rookie
"We all put the yeast in", Larry, Moe & Curley.

Rookie is offline
 
Reply With Quote Quick reply to this message
Old 12-26-2005, 06:37 PM   #3
Atticmonkey
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2005
Location: La Salle, IL
Posts: 114
Default

I am planning on a 5 gallon batch. It will be an extract kit so maybe I wouldnt have to boil the entire 5 gallons at once but I had planned on doing it that way. What do you guys think?

__________________
Atticmonkey is offline
 
Reply With Quote Quick reply to this message
Old 12-26-2005, 06:43 PM   #4
El Pistolero
Feedback Score: 0 reviews
 
El Pistolero's Avatar
Recipes 
 
Join Date: May 2005
Location: Houston, Baja Oklahoma
Posts: 3,598
Liked 13 Times on 13 Posts
Likes Given: 3

Default

Quote:
Originally Posted by Atticmonkey
I am planning on a 5 gallon batch. It will be an extract kit so maybe I wouldnt have to boil the entire 5 gallons at once but I had planned on doing it that way. What do you guys think?
Like the rookie said...you're gonna have a tough time boiling 5 (or 6.5) gallons on a hot plate. Three gals were all I could do on my electric stove top, and it took forever to do that.
__________________

[/I] Up Next - Hobgoblin
After That - Czech Pilsner
Primary - Humboldt Hop Rod (4/24)
Primary - NOT Wheat AG SNCA (5/5)
Secondary -
Conditioning - SNCA Clone (3/3),

El Pistolero is offline
 
Reply With Quote Quick reply to this message
Old 12-26-2005, 07:03 PM   #5
rewster451
Feedback Score: 0 reviews
 
rewster451's Avatar
Recipes 
 
Join Date: Oct 2005
Location: columbia, MO
Posts: 497
Default

Not only can you boil more water faster with gas, but when you turn it off, the heat is gone. Hotplates hold the heat even after you turn it off. This means you don't have to pick up the pot and move it when it starts to boil over. However, I would not use gas in the basement, unless you use an indoor gas stove or something approved for indoor use.

__________________
Up next: Big Brew Off competition between me and Kaptain Karma as one team, and my two roommates as another--We'll be brewing Pale Ales with specifications on malts, hops, and total yeild to see who's version is better (and to end up with ten total gallons of great beer).
Also up soon: Belgian Dubbel
Primary: Grampa's Woodshed Apple Smoked Porter
Secondary: Zombiefoot California Common, Chocolate Strong Porter
Drinking: Seamus O'Drunkagan Irish Red, Humble Pie Imperial Stout, Capricorn IPA
rewster451 is offline
 
Reply With Quote Quick reply to this message
Old 12-26-2005, 09:29 PM   #6
Tony
Feedback Score: 0 reviews
 
Tony's Avatar
Recipes 
 
Join Date: Feb 2005
Location: Saugus, MA
Posts: 917
Liked 2 Times on 2 Posts

Default

Everyone has you covered on this one Jason. Gas with plenty of ventilation is the way to go my friend.

I still do 5 gallon batches in my kitchen, only because I have an industrial size burner on my stove, as well as having my hot water heater/boiler set up that has the temps cranked up in my basement... thanks to my plumber. So I can fill my 9 gallon modified kettle and it doesnt take it long to get to mash in temps. Usually I grind my grains while I heat my mash water, and usually never finish before having to turn down the heat to keep the temp right where I need it. And I still get a good rolling boil as well. But, I keep the kitchen ventilated while I brew.

Im wanting to build a lateral system, and there are many different gas burners to choose from that are cheap, and will be more than adequate to brew with. No matter what, If you want less waiting, and a full rolling boil, go gas.

__________________
Up Next: Cherry Chocolate Rye
Up Next: Gold Nugget IPA
On Tap:Pawtucket Patriot
Dead Soldier:Hop Rod Rye Stout
Dead Soldier: Imperial Hell Fire Ale
Tony is offline
 
Reply With Quote Quick reply to this message
Old 12-26-2005, 11:08 PM   #7
david_42
Feedback Score: 0 reviews
 
david_42's Avatar
Recipes 
 
Join Date: Oct 2005
Location: Willamina & Oak Grove, Oregon, USA
Posts: 25,651
Liked 133 Times on 126 Posts

Default

I'd stick to 2-3 gallon boils using electric. I've done a few inside on the stove and five gallons is just too much for even the big element. On the plus side, using a small electric element and a difuser is an easy way to keep the mash warm.

__________________

Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

david_42 is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Electric HLT Orfy DIY Projects 24 01-08-2010 01:33 AM
Anyone use this for their electric BK? gonzo brewer DIY Projects 3 11-03-2009 01:50 AM
Electric Help hlumbard DIY Projects 15 05-03-2009 08:48 PM
using electric killian General Techniques 36 03-20-2009 03:23 AM
Electric MLT CodeRage DIY Projects 19 01-17-2008 10:53 PM