Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Beginners Beer Brewing Forum (http://www.homebrewtalk.com/f39/)
-   -   cold break/ hot break (http://www.homebrewtalk.com/f39/cold-break-hot-break-50039/)

joejaz 01-04-2008 08:10 PM

cold break/ hot break
 
can someone explain cold break and hot break

zoebisch01 01-04-2008 08:13 PM

Hot Break are the proteins that coagulate during the boil and rise to the surface (scum if you will). Cold break is the precipitation of mostly tannins (protein-polyphenols iirc) and carbohydrates which can only be done by shock cooling the boiled wort. Both the hot and cold break material removal are key to clear, stable and partly off-flavor free beer.

If you get 'chill haze' in your beer this is because you have not sufficiently shocked the remaining material out of the hot wort by rapid cooling. They basically precipitate in part when the temperature drops in the finished beer if they are present.

DeathBrewer 01-04-2008 08:15 PM

it's all about the proteins. this may help:

http://stason.org/TULARC/indulgence/...old-break.html

Skins_Brew 01-04-2008 10:04 PM

I have a question....

I am brewing my second batch and i am doing a partial extract. After the grains got done steeping i added my LME and cranked up the heat and soon after i noticed a foamy type thick substance on the surface. The temp was about 190 degrees Fahrenheit. Is this the hotbreak? And if so, can it and will it form at below 212 degrees Fahrenheit?

DeathBrewer 01-04-2008 10:16 PM

yes and yes. i've found wort usually boils at <210 F, 208 is what mine usually boils at...however, i would wait for a rolling boil before you add your hops.

malkore 01-05-2008 02:23 PM

exactly what DeathBrewer said...hot break will start forming shortly before you hit boiling temps and is really the reason the wort wants to boil over for the first few minutes. wait for that to pass, THEN add your bittering hops and start your boiling timer.

Skins_Brew 01-05-2008 02:55 PM

Awesome, thanks for the info. Everything you guys stated happened. Everytime i did another hop addition i got some minor boil over. My 4 gal pot worked fine for my first batch in regards to boiling over, but this batch had a lot more hops and i had to sit there most of the time and babysit it. Had to blow down the foam a few times. Everything went well until it was time to rake into the primary. After racking, i sealed the bucket up and then remembered that i did not take a OG. Opened the bucket back up, got a sample, closed it up. Took the OG and then 10 minutes later i forgot what it was. Opened it back up, took another sample, closed it up. THen i knocked over the sample. Once again, opened it up, took a sample, got the OG, even told SWMBO to remember the OG, and then sealed it up. Once again, forgot the OG. Finally, for the 4th time, opened it up and got the OG and remembered it long enough to write it down.

Lesson learned: Polishing off a 12 pack and making beer do not mix. Also, I need to write stuff down as soon as i get it!

aliu630 01-05-2008 03:25 PM

Quote:

Originally Posted by zoebisch01
Hot Break are the proteins that coagulate during the boil and rise to the surface (scum if you will). Cold break is the precipitation of mostly tannins (protein-polyphenols iirc) and carbohydrates which can only be done by shock cooling the boiled wort. Both the hot and cold break material removal are key to clear, stable and partly off-flavor free beer.

If you get 'chill haze' in your beer this is because you have not sufficiently shocked the remaining material out of the hot wort by rapid cooling. They basically precipitate in part when the temperature drops in the finished beer if they are present.


Do you want to scoop out this stuff at the surface during hot break? Or just let it all settle down?


All times are GMT. The time now is 10:26 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.