Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Bottles sticking to capper

Reply
 
LinkBack Thread Tools
Old 02-22-2009, 09:38 PM   #1
Bluelinebrewer
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Bluelinebrewer's Avatar
Recipes 
 
Join Date: Dec 2008
Location: Missouri
Posts: 496
Liked 10 Times on 8 Posts
Likes Given: 2

Default Bottles sticking to capper

Tried searching for this problem, but couldn't find anything. This last batch of beer that I brewed, I was having some issues with my capper. It's an upright bottle capper, not sure of the technical name. I capped as usual, but just about every bottle seemed to stick to the capper, on the cap part of the capper. I know there's a magnet in there, but I know it's not THAT strong. Any suggestions? Thanks.

__________________
"I buried my loneliness in her for the night and left with new symptoms no antidepressant could cure." DKM


http://www.bluelinebrewer.com


Like my page on Facebook!
Bluelinebrewer is offline
 
Reply With Quote Quick reply to this message
Old 02-22-2009, 09:47 PM   #2
beerthirty
big beers turn my gears
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
beerthirty's Avatar
Recipes 
 
Join Date: May 2008
Location: Phoenix AZ
Posts: 2,651
Liked 23 Times on 11 Posts

Default

I had that problem with my wing capper. You can try to adjust the bell a little by screwing it on or off a little. Its been a while since I used mine thanks to kegging.

__________________
Quote:
Originally Posted by the_bird View Post
"I've got a fever... and the only prescription is, MORE CARBOYS!"
primary- Tangerine Dream, SWMBO slayer,
serving- amber ale hop experiment #6, Roggenbier, apfelwine
planning- Cru?
conditioning- 9/9/09 barleywine
Drink water?... Never, fish fornicate in it.--- W.C. Fields
Most problems can be solved with the proper application of force.
beerthirty is offline
 
Reply With Quote Quick reply to this message
Old 02-22-2009, 10:21 PM   #3
Glubki
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Denver, CO
Posts: 114
Liked 11 Times on 2 Posts

Default

I have the same problem with an older bench capper. I don't think mine has a magnet though - I think the rubber gasket gets forced up from the pressure and the cap ends up sliding into the gasket mounts and sticks a bit.

__________________
Glubki is offline
 
Reply With Quote Quick reply to this message
Old 02-22-2009, 10:37 PM   #4
KDM
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: League City, Texas
Posts: 133
Liked 2 Times on 1 Posts

Default

Yup, I inherited an old bench capper - which is the proper name for your upright capper - from my family's old on-the-farm days. It's in excellent condition and performs admirably except for one thing: it doesn't release the bottles freely once capped. I've polished the bell and done everything else I could think of, but the problem persists. I did find that tipping the bottle bottom-towards-you is the easiest way to get it unstuck, though.

__________________

Cheers, Kurt

KDM is offline
 
Reply With Quote Quick reply to this message
Old 02-22-2009, 10:45 PM   #5
Glubki
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Denver, CO
Posts: 114
Liked 11 Times on 2 Posts

Default

Quote:
Originally Posted by KDM View Post
Yup, I inherited an old bench capper - which is the proper name for your upright capper - from my family's old on-the-farm days. It's in excellent condition and performs admirably except for one thing: it doesn't release the bottles freely once capped. I've polished the bell and done everything else I could think of, but the problem persists. I did find that tipping the bottle bottom-towards-you is the easiest way to get it unstuck, though.
I think the gasket inside dries up and shrinks over time - if you could find the right sized gasket it would eliminate some of the slop and not allow the cap to be forced up and stick...
__________________
Glubki is offline
 
Reply With Quote Quick reply to this message
Old 02-23-2009, 02:21 AM   #6
Bluelinebrewer
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Bluelinebrewer's Avatar
Recipes 
 
Join Date: Dec 2008
Location: Missouri
Posts: 496
Liked 10 Times on 8 Posts
Likes Given: 2

Default

Ok, well, guess I'll just deal with it. Although this bench capper has only capped 3 batches of beer!! I wouldn't expect it to start malfunctioning so early. Oh well, just more of an incentive to start kegging!!

__________________
"I buried my loneliness in her for the night and left with new symptoms no antidepressant could cure." DKM


http://www.bluelinebrewer.com


Like my page on Facebook!
Bluelinebrewer is offline
 
Reply With Quote Quick reply to this message
Old 02-23-2009, 02:40 AM   #7
jonbeck14
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2007
Location: Charlestown, MA
Posts: 36
Default

could be the brand of bottles too. on my wing capper, anchor steam and sam adams stick to mine, but sierra nevada do not. Rouge 22oz also snag. all my 12oz bottles are now Sierra Nevada or swing tops.

__________________
jonbeck14 is offline
 
Reply With Quote Quick reply to this message
Old 02-23-2009, 02:52 AM   #8
NJTomatoguy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: Maple Shade NJ
Posts: 712
Liked 1 Times on 1 Posts
Likes Given: 1

Default

sierra nevada are awesome for recapping. Dinkel Acker stink, FYI.

__________________
NJTomatoguy is offline
 
Reply With Quote Quick reply to this message
Old 02-23-2009, 01:55 PM   #9
KDM
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: League City, Texas
Posts: 133
Liked 2 Times on 1 Posts

Default

Quote:
Originally Posted by Glubki View Post
I think the gasket inside dries up and shrinks over time - if you could find the right sized gasket it would eliminate some of the slop and not allow the cap to be forced up and stick...
Hah -- I bet Glubki has hit it on the head. The bell is tapered so it only makes sense this is a solution. My antique capper is pretty old, so I can see where a "gasket" might've disappeared long before I took possession of it. Stuffing a hard O-ring-esque affair in there ought to be a simple and cheap enough experiment in any case.

In the meantime, I kept both the bench and wing cappers handy during my two bottling sessions, which is as far as I've gotten in this nutty business so far, and to my surprise I find I pick up the wingy thingy practically every time unless some odd bottle is better served by the bench capper. I wouldn't have guessed it.
__________________

Cheers, Kurt


Last edited by KDM; 02-23-2009 at 01:58 PM.
KDM is offline
 
Reply With Quote Quick reply to this message
Old 02-24-2009, 02:02 AM   #10
Bluelinebrewer
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Bluelinebrewer's Avatar
Recipes 
 
Join Date: Dec 2008
Location: Missouri
Posts: 496
Liked 10 Times on 8 Posts
Likes Given: 2

Default

Yeah, ya know, the more I use this damn bench capper, the more I think a wing capper looks like a better option. Maybe I'll buy one and see.....

__________________
"I buried my loneliness in her for the night and left with new symptoms no antidepressant could cure." DKM


http://www.bluelinebrewer.com


Like my page on Facebook!
Bluelinebrewer is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Caps & Capper or Flipper Bottles digdan Equipment/Sanitation 8 05-04-2009 04:14 PM
Here's to sticking to the man... the hop growers I mean Bobby_M Hops Growing 7 03-23-2008 06:03 PM
Which comercial beer make good bottles for using a two lever capper? SilverAnalyst Beginners Beer Brewing Forum 10 06-07-2007 12:15 AM
sticking to one style? rcdirtbuggy Extract Brewing 13 05-07-2007 01:45 PM
Keg Faucets Sticking gopherhockey Equipment/Sanitation 12 05-02-2006 05:13 AM