The Great Bottle Opener Giveaway

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Anyone use Bottling bucket for Primary ??

Reply
 
LinkBack Thread Tools
Old 02-05-2006, 04:48 PM   #1
dukelynch
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2006
Location: Boston
Posts: 2
Default Anyone use Bottling bucket for Primary ??

Hi All,

I was wondering if anyone has ever used a bottling bucket as a primary fermenter before ?

I just got one and I decided to give it a try, which is what I'm doing now, so far so good. I'm using it as a primary because it seems easier to simply use the spigot at the bottom to move it to a glass secondary fermentor then later use the bottling bucket again for its original purpose.

I asked the local homebrew store about that and they said they wouldn't because bacteria may get into the spigot. But after thinking about it more, this is exactly the way the Mr. Beer machine works. Its just that I would be doubling the capacity this way without the need of using 3 separate buckets or carboys.

2 Stage fermenting with one less siphon makes things a bit easier !!!

Thanks

__________________
dukelynch is offline
 
Reply With Quote Quick reply to this message
Old 02-05-2006, 04:58 PM   #2
david_42
Feedback Score: 0 reviews
 
david_42's Avatar
Recipes 
 
Join Date: Oct 2005
Location: Willamina & Oak Grove, Oregon, USA
Posts: 25,648
Liked 131 Times on 124 Posts

Default

It's just a matter of cleaning and sanitizing. I have three buckets with spigots and mix and match as needed. Always clean when you're done with a piece of gear and clean AND sanitized before using.

__________________

Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

david_42 is offline
 
Reply With Quote Quick reply to this message
Old 02-06-2006, 04:22 AM   #3
dukelynch
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2006
Location: Boston
Posts: 2
Default

Thanks David_42, I thought that would be the case.

So just like the Mr. Beer thingie that do work its just too small......

Very Good,

Happy Homebrewing !!

__________________
dukelynch is offline
 
Reply With Quote Quick reply to this message
Old 02-06-2006, 05:36 AM   #4
Chairman Cheyco
***DRAMATIZATION***
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Chairman Cheyco's Avatar
Recipes 
 
Join Date: Dec 2005
Location: Calgary
Posts: 3,274
Liked 5 Times on 5 Posts

Default

I don't know how high your spigot is, but wouldn't you be drawing a large portion of the sediment along with the beer when you rack it? Seems counter-productive to me to bring the very thing you are trying to get away from with you to secondary. Set me straight.

Welcome to the forum.

__________________

Once the wind has been broken, it cannot be fixed.

Chairman Cheyco is offline
 
Reply With Quote Quick reply to this message
Old 02-06-2006, 11:41 PM   #5
ahoym8e
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2006
Posts: 178
Default

well, my beer kit is coming soon, I hope, and it comes with two spigoted buckets (bottling buckets essentially), and the description has something about a patented spigot system that leaves the trub behind. I think the (top secret, classified, patented) solution to the sediment issue is that the spigot is mounted 2-3 inches up above the bottom of the bucket, and hence leaves the sediment in there...

I could be wrong though...

__________________
ahoym8e is offline
 
Reply With Quote Quick reply to this message
Old 02-07-2006, 04:28 AM   #6
Blender
Feedback Score: 0 reviews
 
Blender's Avatar
Recipes 
 
Join Date: Jan 2006
Location: Santa Cruz, CA.
Posts: 3,116
Liked 5 Times on 4 Posts

Default

I use a bucket with spigot for primary as I just started in January. My spigot is only 1" or so above the bottom. For first 2 batches that proved to be above the level of the trub but on my latest creation I am seeing that the trub level is a bit above the spigot opening. I may have to siphon most of the beer but it seems I might loose a 1\4 to 1\2 gallon on the bottom unless the trub compacts over the next week.

Anyone have a method for getting the liquid out but leave most of the trub?

__________________
Blender is offline
 
Reply With Quote Quick reply to this message
Old 02-07-2006, 07:54 PM   #7
casebrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2005
Location: San Diego
Posts: 846
Liked 6 Times on 6 Posts

Default

Blender, Charley Papazian's book "The Home Brewers Companion", is just about right. Use it to prop the bucket, under the spigot. That will alow the beer to flow without much trub. Then, as the level drops and you can see the trub, 'pour' the beer out of the spigto.

__________________

So far, I've had more experience thinking than I've had brewing....you don't think they are mutually exclusive, do you?

72 batches so far,
48 wine, mostly Loquat, peach, plum, prickly pear
23 beers and ciders
1 sauerkraut
1 Tequila, from a prickly pear wine experiment that didn't work. I call it "Prickly Heat"

casebrew is offline
 
Reply With Quote Quick reply to this message
Old 02-07-2006, 07:58 PM   #8
Baron von BeeGee
Beer Bully
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Baron von BeeGee's Avatar
Recipes 
 
Join Date: Jul 2005
Location: Barony of Fuquay-Varina, NC
Posts: 5,419
Liked 10 Times on 10 Posts

Default

I use a spigoted bucket and don't seem to get much trub out of it. A little I don't really mind. I don't recall offhand how high my spigot is, but I usually have to tip my bucket towards the spigot to get the last of the clear beer out.

__________________
Baron von BeeGee is offline
 
Reply With Quote Quick reply to this message
Old 02-07-2006, 08:21 PM   #9
Blender
Feedback Score: 0 reviews
 
Blender's Avatar
Recipes 
 
Join Date: Jan 2006
Location: Santa Cruz, CA.
Posts: 3,116
Liked 5 Times on 4 Posts

Default

Quote:
Originally Posted by casebrew
Blender, Charley Papazian's book "The Home Brewers Companion", is just about right. Use it to prop the bucket, under the spigot. That will alow the beer to flow without much trub. Then, as the level drops and you can see the trub, 'pour' the beer out of the spigto.
Good idea Casebrew. I will have to try that.
__________________
Blender is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
using bottling bucket as primary doodlevon Beginners Beer Brewing Forum 3 07-10-2009 06:59 AM
Bottling bucket as primary? kidoduck Beginners Beer Brewing Forum 7 04-27-2009 12:23 PM
racking from primary to bottling bucket Mogref Beginners Beer Brewing Forum 7 04-05-2009 08:42 PM
primary/bottling bucket woes Roasty Bottling/Kegging 11 06-24-2008 11:29 PM
Using bottling bucket as a primary OSUmoney83 General Techniques 7 02-14-2005 07:55 PM