Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > an advice is needed
Reply
 
LinkBack Thread Tools
Old 04-02-2012, 02:32 PM   #1
emil_brogaard
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: hvidovre, denmark
Posts: 8
Default an advice is needed

hi everyone

okay, so yesterday, i made my very first batch of beer. it was a palido mix, from brewferm. the whole process worked out quite nicely, and it was pretty fun. i just have one problems. i misread the instructions, and waited a night before adding water to the airlock (letting the wort set for two days WITHOUT the yeast would help develop the flavors i suppose). today, when i found out, i immediately put water in it. there's definitely something going on, as the first bit of water splashed all over the place. now it's bubbling every 30 seconds, so the yeast is quite active i suppose.

but my question is, do you think the 12 hours without an airlock would have ruined the batch?

any help would be appreciated

ps. sorry for the bad english, it's not my main language, and some of the technical terms can be a bit tricky to understand

__________________
emil_brogaard is offline
 
Reply With Quote Quick reply to this message
Old 04-02-2012, 02:35 PM   #2
TTB-J
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Houston, TX
Posts: 592
Liked 21 Times on 21 Posts
Likes Given: 1

Default

Nope - 12 hours without the airlock did not ruin your batch.

__________________
If you can read this, you need to drink more beer.
TTB-J is offline
 
Reply With Quote Quick reply to this message
Old 04-02-2012, 02:36 PM   #3
Jayhem
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Culpeper, VA
Posts: 2,568
Liked 257 Times on 208 Posts
Likes Given: 1163

Default

Did you put the yeast in the wort on the brew day or did you put the yeast in 2 days later?

Many people ferment beer for the first few days without an airlock. When the yeast is highly active and there are lots of bubbles (CO2 gas) then having no airlock will usually not be an issue with contamination.

__________________

Next up: American Pale Ale
Primary 1&2: American Brown Ale
Primary 3&4: Hopped up Belgian Tripel
Bottle Conditioning/drinking: Summer Kolsch, White Zombie (Amarillo IPA), English Pale Ale (ESB)

Jayhem is offline
 
Reply With Quote Quick reply to this message
Old 04-02-2012, 02:37 PM   #4
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Revvy's Avatar
Recipes 
 
Join Date: Dec 2007
Location: "Detroitish" Michigan
Posts: 40,804
Liked 2749 Times on 1648 Posts
Likes Given: 3485

Default

The thing to remember is, even with a dry airlock is that the bad stuff are not ninja acrobats....whether it is a 3 piece or an s type, they would have to get through the cap at the top, then either negotiate a series of twist and turns through an S shaped "track" OR have to dive down, then climb up the center post under the plastic bubbler, then lift said bubbler up enough to the make it into the center post and dive into your fermenter....and STILL have to negotiate the rising co2 current pushing out of the fermenter itself....Think about it...Even without water in there, do you think a piece of dust can make this journey?





Needless to say a piece of dust ain't gonna make it. And not much else either. Relax

__________________

Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

Revvy is offline
 
Reply With Quote Quick reply to this message
Old 04-02-2012, 04:11 PM   #5
emil_brogaard
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: hvidovre, denmark
Posts: 8
Default

wow guys, thank you for the fast replies. they were very well written, and I'm definitely happy to have joined this forum

__________________
emil_brogaard is offline
 
Reply With Quote Quick reply to this message
Old 04-02-2012, 05:22 PM   #6
DonutMuncher
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2010
Location: Las Cruces, NM
Posts: 171
Liked 6 Times on 6 Posts
Likes Given: 1

Default

Quote:
Originally Posted by emil_brogaard View Post
(letting the wort set for two days WITHOUT the yeast would help develop the flavors i suppose).
No one really commented on this, but you don't need to let the wort sit for two days before pitching yeast. You should just go ahead and pitch it once you've cooled the wort to the proper temperature. The flavors will develop plenty by letting the beer sit in the primary fermenter for 3-4 weeks.
__________________
DonutMuncher is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Advice needed bandrascik33 Beginners Beer Brewing Forum 14 04-29-2012 02:28 PM
advice needed themashedone Beginners Beer Brewing Forum 19 05-04-2011 05:36 PM
Advice needed, please help! shaundesjardins Beginners Beer Brewing Forum 10 01-02-2009 04:45 PM
KIt instructions - HBT advice needed mthompson Beginners Beer Brewing Forum 7 10-31-2008 06:10 PM
Advice Needed Noldar Beginners Beer Brewing Forum 8 10-27-2006 08:38 PM