Spike Brewing 12.5 Conical Fermenter Giveaway!

Home Brew Forums > Home Brewing Beer > Extract Brewing > stuck fermentation?

Reply
 
LinkBack Thread Tools
Old 12-01-2008, 12:08 AM   #1
rtockst
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2008
Location: Benton, IL
Posts: 150
Default stuck fermentation?

I just racked a beer to the secondary, and I took a gravity reading before hand. 1.02. It was 1.02 a whole week before. But What I can't figure out, is that the recipe said the FG should be around 1.01-1.016. I know there wasn't any error in the reading because it was right at 60 F. I did scorch the wort a little when boiling, so does the sugar that gets caramelized when you scorch it not ferment? My temperatures also dropped down to 58 for a day or two while fermenting, but not until after the first week. Just looking for some possible reasons for why my FG isn't down where it's suppose to be.

__________________
Quote:
For a quart of Ale is a dish for a King - William Shakespeare
On Deck: Rapturous Doppelbock

Primary: Oktoberfest!!

Secondary:

Bottled:
rtockst is offline
 
Reply With Quote Quick reply to this message
Old 12-01-2008, 12:52 AM   #2
BrianP
Feedback Score: 0 reviews
 
BrianP's Avatar
Recipes 
 
Join Date: Sep 2007
Location: Dexter, MI, Michigan
Posts: 1,159
Liked 2 Times on 2 Posts

Default

I'm not sure about the scorching question, but you might be done fermenting. To make sure you should probably provide the recipe, the OG, the yeast you used, etc. A high-attenuating yeast can attenuate about 75%, a less-attenuating one aroung 65-70%.

Yeast likes a consistent temp, and if temp drops below their 'comfort zone' they will drop out and shut down. You mention a drop during week #2 to 58F. If this were in week 1, I'd be concerned that you stalled the fermentation, but if it only happened in week 2, you might be ok, since the bulk of the fermenting happened in week 1.

If you want to try to ferment it further, adding extra yeast won't work, but you can try adding a yeast starter that is actively fermenting. Mix up some DME and a packet of dry yeast (or a vile of liquid yeast if you're into that) and when it is actively fermenting, pitch the whole thing into your beer. The yeast will ferment the starter and then finish up the remaining fermentables in your beer.

Good luck.

__________________

Cheers,

BP

-------------------------------
Fermenter 1: Best bitter (1)
Fermenter 2: Best bitter (2)
Fermenter 3: APA
Fermenter 4: APA

BrianP is offline
 
Reply With Quote Quick reply to this message
Old 12-01-2008, 12:54 AM   #3
histo320
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2008
Location: Manteno, IL
Posts: 1,053
Liked 31 Times on 22 Posts
Likes Given: 8

Default

It might possibly be done fermenting. I have never used a secondary. Your gravity is not that far off, I would wait a few more days, take a reading in 3 days, if it is the same, go ahead and bottle when you have time.

I wouldn't worry about temps, 58 is pretty low, I usual ferment at 70. THe warmer it is, the faster it ferments, but you need to avoid 20 degree changes, that can kill the yeast.

__________________
Tyler's Brewhaus

Drinking - Cream of Three Crops
Primary #1 - Deadringer IPA
Primary #2 - Highland Gaelic Ale Clone
Up Next - ???????
histo320 is offline
 
Reply With Quote Quick reply to this message
Old 12-01-2008, 01:07 AM   #4
rtockst
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2008
Location: Benton, IL
Posts: 150
Default

My recipe was a Brewer's best kit - bold series holiday ale - OG 1.070-1.078 - FG 1.010-1.016. So I'm not too far off... My OG was 1.070 and it is now 1.02. I'm also a bit confused on reading the hydro... look at where the beer climbs up the hydro, or look at the level surface of the beer?

When fermentation was going strong, it was about 67.5 F at the max, then when it slowed, it dropped to about 63 F. Checked my log, and it was almost two weeks after I pitched the yeast when it was at 58 F. Then it slowly came back up to 63 F. It was in my primary for about 18 days, then I racked to secondary. It was at 1.021 on Nov. 17th, then on the 28th it was at 1.02.

__________________
Quote:
For a quart of Ale is a dish for a King - William Shakespeare
On Deck: Rapturous Doppelbock

Primary: Oktoberfest!!

Secondary:

Bottled:
rtockst is offline
 
Reply With Quote Quick reply to this message
Old 12-01-2008, 01:22 AM   #5
ifishsum
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Portland OR
Posts: 1,457
Liked 7 Times on 7 Posts

Default

Quote:
Originally Posted by rtockst View Post
I'm also a bit confused on reading the hydro... look at where the beer climbs up the hydro, or look at the level surface of the beer?
You should take your reading from the surface of the liquid, not where it's climbed up on the hydrometer.
__________________
"If you're gonna be an ape, be a hairy one" - Spyder

Primary 2: Edwort's Robust Porter
Secondary 1: LW Pale Ale
Secondary 1: Blackened Soul RIS
Kegged: Dead Guy Ale
Kegged: Rye Pale Ale
Kegged: Haus Pale Ale
Kegged: Nut Brown Ale
Kegged: Afrikan Amber
Kegged: Jock Scott Ale
Kegged: Afrikan Amber
ifishsum is offline
 
Reply With Quote Quick reply to this message
Old 12-01-2008, 02:25 AM   #6
histo320
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2008
Location: Manteno, IL
Posts: 1,053
Liked 31 Times on 22 Posts
Likes Given: 8

Default

I would think you are ready to bottle.

__________________
Tyler's Brewhaus

Drinking - Cream of Three Crops
Primary #1 - Deadringer IPA
Primary #2 - Highland Gaelic Ale Clone
Up Next - ???????
histo320 is offline
 
Reply With Quote Quick reply to this message
Old 12-01-2008, 03:09 AM   #7
ScottD13
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2005
Location: Jersey
Posts: 309
Default

Did you use a starter or aerate/oxygenate? I used to always fall short with my FG before I started using starters and my aquarium pump.

__________________
ScottD13 is offline
 
Reply With Quote Quick reply to this message
Old 12-01-2008, 03:50 AM   #8
rtockst
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2008
Location: Benton, IL
Posts: 150
Default

Quote:
Originally Posted by ScottD13 View Post
Did you use a starter or aerate/oxygenate? I used to always fall short with my FG before I started using starters and my aquarium pump.
I just had a dry yeast packet that came with the ingredient pack. I rehydrated it like you're supposed to but didn't make a starter. And I only partially boiled then topped off with about 3 gallons when I put it into the primary. I just assumed agressively dumping 3 gallons of nonboiled water into the wort would be enough to aerate it.
__________________
Quote:
For a quart of Ale is a dish for a King - William Shakespeare
On Deck: Rapturous Doppelbock

Primary: Oktoberfest!!

Secondary:

Bottled:
rtockst is offline
 
Reply With Quote Quick reply to this message
Old 12-01-2008, 05:29 AM   #9
ifishsum
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Portland OR
Posts: 1,457
Liked 7 Times on 7 Posts

Default

You aren't supposed to make a starter with dry yeast, so don't worry about that. And with partial boiling, you usually will get enough oxygen from your top-off water. I often shake it up before pouring it in, but I didn't have a problem before I started doing that.

I would say it's most likely close to finished, not necessarily stuck. 1.020 is pretty close and it may be all your yeast can do. Do you remember the brand and strain of dry yeast that you used?

__________________
"If you're gonna be an ape, be a hairy one" - Spyder

Primary 2: Edwort's Robust Porter
Secondary 1: LW Pale Ale
Secondary 1: Blackened Soul RIS
Kegged: Dead Guy Ale
Kegged: Rye Pale Ale
Kegged: Haus Pale Ale
Kegged: Nut Brown Ale
Kegged: Afrikan Amber
Kegged: Jock Scott Ale
Kegged: Afrikan Amber
ifishsum is offline
 
Reply With Quote Quick reply to this message
Old 12-01-2008, 05:55 AM   #10
rtockst
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2008
Location: Benton, IL
Posts: 150
Default

Well it came in a brewer's best ingredient kit and it didn't have any brand markings on the yeast package. So there's no telling. I just assumed it was Muntons because that's the kind of extract that came with it. But, it probably is close to done, going on three weeks. The temp changes were real gradual so I doubt that hurt them, and I know I had a pretty good fermentation going because it spit krausen up into the airlock in a 6.5 gallon bucket. So it probably is close to done. I just assume it may be from scorching the wort somewhat

__________________
Quote:
For a quart of Ale is a dish for a King - William Shakespeare
On Deck: Rapturous Doppelbock

Primary: Oktoberfest!!

Secondary:

Bottled:
rtockst is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stuck fermentation...finished fermentation...? arover Beginners Beer Brewing Forum 3 04-08-2009 03:05 AM
Stuck Fermentation - I Know... Not another Stuck Fermentation Thread :( Jewrican General Techniques 23 04-07-2009 12:53 AM
Fermentation Stuck Berserker Beginners Beer Brewing Forum 2 12-09-2008 06:45 PM
Fermentation Stuck?? Kbone054 Beginners Beer Brewing Forum 13 11-15-2006 05:49 PM
is it stuck fermentation?? jbcavman Extract Brewing 3 02-01-2006 01:43 AM