Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Extract Brewing > Splitting batch
LinkBack Thread Tools
Old 02-26-2007, 11:26 PM   #1
Feedback Score: 0 reviews
Join Date: Oct 2006
Posts: 20
Default Splitting batch

Ok I have heard that doing a full boil for 5 gallons gives a much better result for extract brewing.
I have two 3 gallon kettles, will i get better results by splitting my batch.


Lochboy is offline
Reply With Quote Quick reply to this message
Old 02-27-2007, 12:38 AM   #2
Reinvented Biermann
Feedback Score: 0 reviews
Biermann's Avatar
Join Date: Mar 2006
Location: East Peoria, IL
Posts: 1,471
Liked 18 Times on 18 Posts
Likes Given: 1


I'm not real sure what you mean. . .

Doing full boils is just extremely convenient. You don't have to top up with water, or have several pots heating, or any of that crap. You can just put your water in, bring it up to temp, steep, add extract, boil, add hops and your done. That's the beauty in full wort boils-- plus you don't have to worry much about sanitation issues with cold water additions.

as far as "better results"-- I'm not real sure what implying. . .


On Draft: Old, Stale, Oxidized beer

Holding tanks:Sold
Conical #1:Sold
Bottles: Nichts
On Deck:

Biermann is offline
Reply With Quote Quick reply to this message
Old 02-27-2007, 02:31 AM   #3
Georgian Novice
Feedback Score: 0 reviews
Georgian Novice's Avatar
Join Date: Dec 2005
Location: Columbus, GA
Posts: 89

Loch, I think I know what you mean. Take a look at the thread "best type of brew pot". Think this is the link.
Take care.

Bottom line is that you won't really get any better results as far as the quality of the beer whether you do a straight 2-3 gallon boil and then add 2 gallons to your fermenter, split the two boils so you are boiling all 5 gallons in two pots, or getting a bigger pot and boiling all 5 at the same time. You only really get better results and more control as you move into all grain brewing, which I haven't moved into myself either. Still having plenty of fun with playing around at this level.


Last edited by Georgian Novice; 02-27-2007 at 02:34 AM.
Georgian Novice is offline
Reply With Quote Quick reply to this message
Old 02-27-2007, 03:29 AM   #4
Vendor and Brewer
Vendor Ads 
Feedback Score: 2 reviews
Bobby_M's Avatar
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,004
Liked 967 Times on 647 Posts
Likes Given: 28


More hop utilization, less scorching (lighter beer), better prepped for all grain.

Larger pot, harder to cool (chiller), must do something to get O2 back in unless you're pitching a starter.

Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is offline
Reply With Quote Quick reply to this message

Quick Reply
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Splitting Batch Spludge Beginners Beer Brewing Forum 2 11-02-2009 07:44 PM
Splitting your 5 gal batch into 2 HotTrailerBrew Beginners Beer Brewing Forum 7 09-04-2008 04:55 PM
Splitting a Batch Help lcf8088 General Techniques 4 08-13-2008 10:05 PM
Splitting a batch Gammon N Beer Recipes/Ingredients 4 01-12-2008 03:45 PM
splitting batch isuace General Techniques 1 10-17-2007 03:53 AM