Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > Extract Brewing > Prehopped LME

Reply
 
LinkBack Thread Tools
Old 11-21-2010, 11:28 PM   #1
william_shakes_beer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Maryland
Posts: 1,844
Liked 86 Times on 78 Posts

Default Prehopped LME

Asked this as a follow on to my thread in the beginner forum, thought I'd see if I can get better luck here rather than topping the other thread.

If I buy 1 can of prehopped LME is it always going to be hopped for bitterness appropriate to a full (IE 5 gallon) batch? Or are there some LME manufacturers that only hop for the volume of malt in the can, requiring 2 cans of prehopped? If there is a difference in malt manufacturers, how would I tell by reading the can? Still getting ready to do my first batch, and trying to understand what's what. Expect to move to steeping grains and hopping myself shortly, but expect to start off will all extract until I am certain my brewing practices are up to snuff.

__________________
william_shakes_beer is offline
 
Reply With Quote Quick reply to this message
Old 11-22-2010, 02:11 AM   #2
FatherJack
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2010
Posts: 505
Liked 13 Times on 6 Posts

Default

I would say you're ok with just the can and maybe another can of unhopped LME.

Or, if you don't mind it bitter, two cans of the same stuff.

Or, if you don't mind another bitter variation, use the prehopped, an unhopped can and finally add your own hops.

I did this last one with a stout and it came out pretty decent, it wasn't too bitter at all.

If you have a high tolerance for bitterness, why not play around with it?

__________________

Primary: Beer
Bottled: Beer
Future Brews: Beer

FatherJack is offline
 
Reply With Quote Quick reply to this message
Old 11-22-2010, 02:15 AM   #3
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Revvy's Avatar
Recipes 
 
Join Date: Dec 2007
Location: "Detroitish" Michigan
Posts: 40,804
Liked 2712 Times on 1630 Posts
Likes Given: 3484

Default

The trouble is that the IBUs of the cans of hopped, pre diluted lme is through the roof. If you look at the data for coopers kits, the pre-diluted extract in that can is like 700IBUs...it's only when it gets diluted it comes down to what we get in the final product.

At least once a year someone comes on here after reading the cooper's website freaking out or thinking it is a misprint. But someone on here actually wrote to them and they explained. I post this like once a year.

Quote:
I fell for that one myself. 710 IBU and 560IBU is for the bitterness at 1.7kg level. By the time you dilute to (say) 23litres, the IBU of the wort is no where near that level.


Coopers Kits

Lager 90 EBC 390 IBU
Draught 130 EBC 420 IBU
Real Ale 230 EBC 560 IBU
Bitter 420 EBC 620 IBU
Dark Ale 550 EBC 590 IBU
Stout 1800 EBC 710 IBU
Canadian Blonde 70 EBC 420 IBU
Bavarian Lager 90 EBC 390 IBU
Mexican Cerveza 53 EBC 300 IBU
Australian Pale Ale 90 EBC 340 IBU

This is for the concentrated form in the can - to get the figure for 23litres: multiply by 1.25 and divide by 23.
To convert EBC to SRM: SRM = (EBC - 1.2)/2.65

Therefore 710 IBU in can = 710 x 1.25 divided by 23 litres = 38 IBUs.


Here's a followup post with an email exchange between a homebrewer and someone @ Cooper's.


Quote:
QUOTE (My email)
How do you calculate how bitter a beer is?

I made a Coopers Bitter, which from your website says is 620 IBU. This is the bitterness of the tin yes?

If made to 23L, what would the bitterness of the beer be?

Would it be 620IBU/23L = 27IBU?

Thanks for your help,
Rob.

And got the reply:

QUOTE (Coopers reply)
G'day Robert. You're close. You also need to take into account the volume of can (1.25l) and allow 5% loss during fermentation:

(620 X 1.25)/23 X 95% = 32 IBU

Cheers, Frank.
Hope that helps somewhat give you an idea.
__________________

Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

Revvy is offline
 
Reply With Quote Quick reply to this message
Old 11-22-2010, 12:49 PM   #4
william_shakes_beer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Maryland
Posts: 1,844
Liked 86 Times on 78 Posts

Default

Thanks for the clarity and the patience. My pallet does not have a taste for high hops. I am in the tasting mode, trying different specialty beers and using the Beer Judge cert docs to compare my impressions. Tried a 6 of Sierra Nevada torpedo extra IPA as a representative of a high hopps beer and decided i'm not a hop head.

In looking through the Zainasheff/Palmer book "Brewing Classic styles" I see the IBU range for an IPA, which would be on the upper end of the hops range, goes from 50-200.

Based on your formula, If I was using a combo of LME and DME, and my pallet wants to target the 30 IBU of a stout, I'd need to find a combo of extracts that list their "in the can" IBU at 581.

__________________
william_shakes_beer is offline
 
Reply With Quote Quick reply to this message
Old 11-22-2010, 12:56 PM   #5
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Revvy's Avatar
Recipes 
 
Join Date: Dec 2007
Location: "Detroitish" Michigan
Posts: 40,804
Liked 2712 Times on 1630 Posts
Likes Given: 3484

Default

Quote:
Originally Posted by william_shakes_beer View Post

Based on your formula, If I was using a combo of LME and DME, and my pallet wants to target the 30 IBU of a stout, I'd need to find a combo of extracts that list their "in the can" IBU at 581.
I don't now, no one's ever approached it "backwards" like that, I think. Because I don't think a lot of people who are using cooper's are at the stage of learning where they even think about IBUs yet, especially since it's pre-hopped. And I don't know if OTHER brands give the IBU info the same way.

BUT iirc some software does list hopped extracts in their inventory, so I think you can crunch numbers and build recipes with coopers cans. But even if they don't I think you're on the right track. Obviously you can lower the ibus of a recipe based on a can simply by adding a few pounds of plain old dme to the recipe.

I glad you brought this up, because I think it's a good way to work with this stuff.
__________________

Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

Revvy is offline
 
Reply With Quote Quick reply to this message
Old 11-22-2010, 01:52 PM   #6
david_42
Feedback Score: 0 reviews
 
david_42's Avatar
Recipes 
 
Join Date: Oct 2005
Location: Willamina & Oak Grove, Oregon, USA
Posts: 25,651
Liked 133 Times on 126 Posts

Default

The problem I see with trying to mix cans is simply that you end up with a lot of leftovers, unless you do double batches. As you are just getting started, why not make the beers per the instructions and judge them.

Remember that bitterness and hoppiness are not the same thing. An Extra Special Bitter can have almost no hop aroma and be as bitter as an IPA. Some Pales are in the 20 IBU range, but have high aroma. With a pre-bittered kit, you can reduce hop flavor and aroma just by boiling longer.

__________________

Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

david_42 is offline
 
Reply With Quote Quick reply to this message
Old 11-22-2010, 05:43 PM   #7
PT Ray
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2005
Posts: 1,372
Liked 6 Times on 6 Posts

Default

Generally speaking prehopped kits are formulated to make 23 liters with some additional malt or sugar. The bitterness is not insane but more than what you'd find in mainstream beer. It varies a little based on style so even without knowing the IBU's you can make an educated guess. The "Lagers" and "Draughts" being on the lower end and on up from there.

__________________
PT Ray is offline
 
Reply With Quote Quick reply to this message
Old 11-22-2010, 06:12 PM   #8
Skyforger
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2010
Location: Ada, MI
Posts: 569
Liked 9 Times on 9 Posts
Likes Given: 2

Default

With all this work you're going through trying to figure out the bitterness, it might just be easier to use an unhopped can and add your own hops. Just choose an ounce of pellets with about 10-12%AA and chuck them in once the whole mess starts boiling. This should give you about 28-30 IBU's if you boil for about an hour.

__________________
Skyforger is offline
 
Reply With Quote Quick reply to this message
Old 11-22-2010, 11:19 PM   #9
grasshopper1917
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2007
Location: Halifax, Nova Scotia
Posts: 411
Liked 6 Times on 6 Posts
Likes Given: 2

Default

Short answer is yes the cans have enough bitterness in the can for a full 23 liters. I make these all the time. Here is a video I made of a nice simple recipe for a beginner. Experiment with different combos ect..... Pretty hard to make a bad beer if you use good sanitation and good fermentation temps - cheers

__________________
grasshopper1917 is offline
 
Reply With Quote Quick reply to this message
Old 11-23-2010, 05:52 PM   #10
Whippy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Irmo, South Carolina, USA
Posts: 616
Liked 30 Times on 27 Posts
Likes Given: 108

Default

I have nothing to add, but your username is THE BEST!! HAAHAHAHAHAAAA

__________________

Two weeks to ferment, two more in the kegs
but in just one night it was drained to the dregs

Whippy is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
prehopped kit, wort chill question and rookie kidoduck Extract Brewing 4 01-18-2009 02:02 PM
Prehopped kit prices grasshopper1917 Extract Brewing 1 11-07-2007 04:17 PM