First Time Question

pilot45 · 04-08-2009, 02:13 PM

I started my first batch last night. It was an Ironmaster Stout Extract kit. I used the 4lbs of extract and then added 2lbs of sugar, just like the guy at the store told me to do. I have been reading some threads about extract brewing and some say that using sugar or not doubling the malt will yield a pretty bad beer. Any opinions? Now I am worried that my first batch may just suck. Has anyone used this method before and gotten a good beer?

rsmith179 · 04-08-2009, 02:16 PM

Good beer comes from many different methods. Some people never use sugar and opt for the DME instead. I have personally used sugars in my Belgian Saison and it came out great. The sugar helps add alcohol and also helps "dry out" the beer a little bit. Don't be concern about this and don't second guess yourself as much as you are. You will quickly find that making beer is pretty easy. Yeah, there's a lot of advanced stuff out there, but just follow the directions on your kit and you'll be fine.

**Laughing_Gnome_Invisible** · 04-08-2009, 02:19 PM

Post your ingredients and recipe if you have it. Someone here will most likely chime in and tell you what qualities you can expect from the final brew.

**Dwain** · 04-08-2009, 02:29 PM

First, congratulations on your first batch. Second, RDWHAHB or your favorite alternative. How fast is the air lock checking? When you say sugar, what kind are you talking about (dextrose?)? It has been many years since I brewed with an exract kit. 2lbs. seems like a lot of sugar but I can't recall. One of these other guys with a better memory will jump in. But the main thing is, let it run its course and don't worry. See the second sentence. Luck - Dwain

**Dwain** · 04-08-2009, 02:29 PM

And Voila, while I was typing, some of them did. - Dwain

pilot45 · 04-08-2009, 02:32 PM

Thank you for the advice thus far. As for my ingredients, it was the 4lb Ironmaster Porter kit, which was a 4lb can of concentrated wort. I boiled three gallons of water, removed from heat, added the can, stirred, then placed back over heat, added 2lbs of sugar. I can't recall what kind, I bought it from the brew store and it is what the guy behind the counter recommended. It looked like confectioners sugar. I dissolved all the sugar over heat, then gave the wort an ice bath until it was below 80 degrees. Then I pitched the yeast, which I had already pre-mixed with some water. The yeast came with the kit and was not labeled.

YES, it was dextrose!!!!!! Thank you!!! I put it in the fermenter at 10pm last night, as of 7am this morning there was not too much activity, about 1 bubble every 5 minutes. I am hoping it is a slow process.

**Dwain** · 04-08-2009, 06:35 PM

I asked about the air lock because that is easy to check. In reality, that's really not the greatest indicator but it is something easy to check that says "something is going on in there." It will speed up and probably has by now. It will be fine. Welcome to the club! - Dwain

pilot45 · 04-08-2009, 07:33 PM

Thanks all for the replies!

**Laughing_Gnome_Invisible** · 04-08-2009, 07:38 PM

Quote:

Originally Posted by rsmith179

Good beer comes from many different methods. Some people never use sugar and opt for the DME instead. I have personally used sugars in my Belgian Saison and it came out great. The sugar helps add alcohol and also helps "dry out" the beer a little bit. Don't be concern about this and don't second guess yourself as much as you are. You will quickly find that making beer is pretty easy. Yeah, there's a lot of advanced stuff out there, but just follow the directions on your kit and you'll be fine.

Based on your ingredients (I'm assuming a pre-hopped extract) I would echo the above quote.

It sounds like you will have a stout a little on the dry side (Nothing wrong with that). Don't worry about fermentation, as long as you can keep it as close to about 70f as possible it will be fine. Use the fermentation time to study up in this forum

pilot45 · 04-09-2009, 01:38 PM

OK, I came home yesterday and fermentation was in full swing. The lag time was 12 to 16 hours. Heres another question. I live in Florida, I have the fermenter in a closet in the house. The thermometer on the side of the fermenter read 74 degrees. Once fermentation started, the thermometer slowly started to creep up to 76 degrees. My thermometer has 76 and the high range for an ale. So I cleaned out the spare fridge this morning, made it a bit warmer than usual, and put the fermenter in. I think it should stabilize to around 62 to 66 degrees. My question is this, did I do the right thing?