Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > weird way of adjusting wort gravity?
Reply
 
LinkBack Thread Tools
Old 07-08-2008, 01:17 AM   #1
beretta
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2008
Posts: 114
Liked 3 Times on 3 Posts

Default weird way of adjusting wort gravity?

Hello fellow brewers. !First Post Alert!

I have been brewing beer for 4-5 years, and last year I switched to all grain brewing. Early on, I used to have trouble controlling my OG. Some beers where too small, and some where too big. I figure this had a lot to do with my then constantly changing mashing methods. I since developed a way to adjust my pre-boil gravity to usually "peg" my target OG.
First I figure out my target OG in terms of total sugars. Say my target OG is 1.050 at a 5 gallon batch. Then my target gravity-points would be 50. (drop the "1.0") Then multiply by my length - 5 gallons. Giving me result of 250 pts*gals.
I know from dozens of mashes that I acheive about 30 pts*gals per lb of grain. So I divide the taget 250 pts*gals by 30 and I get 8.33 lbs of grain. I usually throw in about 1 extra lb of grain because I'll adjust my preboil volume DOWN to my target - and I get a healthy amount of extra wort to krausen/carbonate/starter with.
After the sparge/lauter, I mix my wort up in the kettle because I found that the first runnings (heavy SG) from the lauter sticks to the bottom of the brew kettle, and the low density late runnings stick towards the top, or simply put the wort is stratified. After mixing I take a temperature adjusted SG and volume reading. Lets say I end up with SG=1.040 and 7 gallons.
I then calculate the pts*gals of the pre-boil wort: 40 x 7= 280 pts*gals. My target is 250. so I adjust remove wort to compensate:
280 - 250 = 30 pts*gals - This is what I have to "remove" from the boil. Knowing that my wort is 1.040 sg (or 40 sg points) I know that I need to remove 30 pts*gals / 40 pts = .75 gals. I then remove this much wort - .75 gallons.
Now my pre-boil length is now 7 gals - .75 gals = 6.25 gals. I know from records that I'll loose just that much during a 60 minute boil. But if I need more pre-boil volume, I'll add some fresh water, to adjust. (most times I have to add a quart or two of water)
After my boil, I usually end up with a perfect target OG; in this example 1.050 or 50 pts.
I've never read or heard of this technique. It seems to work great. But I'm wondering if I'm strange for over-doing the target OG thing, to the detriment of my brew. I know my yeast bank pretty good, and I usually hit my ABV by .1 - .2 %.

Any questions, comments, concerns, laughter, or flames?

__________________
beretta is offline
 
Reply With Quote Quick reply to this message
Old 07-08-2008, 01:22 AM   #2
FlyGuy
Feedback Score: 0 reviews
 
FlyGuy's Avatar
Recipes 
 
Join Date: Jan 2007
Location: Calgary, Alberta
Posts: 3,618
Liked 129 Times on 41 Posts
Likes Given: 7

Default

Welcome to HBT! Great first post.

I use a somewhat similar method when batch sparging. I monitor the gravity of my runnings to determine whether I will undershoot or overshoot my target pre-boil gravity. But instead of purposely over-shooting and removing some wort, I adjust the amount of sparge water I use and compensate with a longer boil, if necessary (or top-up with water if I over-shoot). I also use brewing software to do the calcs (I am just lazy).

FlyGuy is offline
 
Reply With Quote Quick reply to this message
Old 07-08-2008, 01:31 AM   #3
Special Hops
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: Kanatenah
Posts: 1,430
Liked 21 Times on 19 Posts
Likes Given: 3

Default

I'm gonna have to read that one more time.

__________________
Special Hops is offline
 
Reply With Quote Quick reply to this message
Old 07-08-2008, 03:11 AM   #4
jagg
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2006
Location: North Central NC
Posts: 527
Liked 2 Times on 2 Posts

Default

Quote:
Originally Posted by Special Hops View Post
I'm gonna have to read that one more time.
I did reread it Welcome to HBT Beretta, I have never heard it explained like that before, but I just might try it sometime, thats what I like about this forum, you learn something everyday, keep on brewing
__________________
jagg is offline
 
Reply With Quote Quick reply to this message
Old 07-08-2008, 07:15 AM   #5
Kauai_Kahuna
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2008
Location: Hawaii
Posts: 2,280
Liked 7 Times on 7 Posts

Default

Very nice posting and I'm taking notes. Thank you.

__________________
Kauai_Kahuna is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Weird film on wort in primary ipajay Fermentation & Yeast 2 09-20-2009 01:03 AM
Help Wort chiller inside of the boil kettle ideas ( Its weird take a look)? ramz7887 DIY Projects 16 07-16-2009 05:58 PM
Adjusting gravity with more H2O nasmeyer Beginners Beer Brewing Forum 4 04-15-2009 03:47 PM
Adjusting gravity with Beersmith climateboy Brewing Software 6 12-08-2008 04:35 PM
Adjusting to hit target gravity Dark_Ale Recipes/Ingredients 2 12-28-2007 05:16 PM