Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Thoughts after my first brew day on my brew stand
Reply
 
LinkBack Thread Tools
Old 06-25-2012, 06:28 PM   #1
vince805
Feedback Score: 2 reviews
Recipes 
 
Join Date: Jun 2011
Location: Oxnard, CA
Posts: 260
Liked 14 Times on 13 Posts
Likes Given: 3

Default Thoughts after my first brew day on my brew stand

I've done a handful of all grain batches before using a 7 gallon pot, 10 gallon igloo cooler(MLT) and 5 gallon igloo cooler (HLT). Yesterday, my brew partner and I did the first all grain batch on my new brew stand. I want to give my experiences and thoughts and try to get some advice/tips to make it go smoother next time.

1. Mashing: I used the same process as I did with the cooler, where I put the grains into the MLT, and heated the water in the HLT and then transferred the water onto the grains. This worked OK, but I think next time I will put the water in the MLT and heat it to the desired temp and then mix the grains in. That will remove a pumping step and reduce the temp drop.

2. Dumping Mash: Dumping the grains from a keg, sucks. The grains went all over the place. Hoping to find a trick to make this go smoother.

3. Hoses: I made hoses with fittings on them each ~5' long. When I got to the point of 10 minutes left I wanted to sanitize my wort chiller/tubing and whirpool. With the house on the output of the pump to the chiller (5') then the hose from the chiller to the whirpool fitting (+5', 10' total) and the wort chiller mixed in, it was pretty much no pressure. I am going to make some shorter hoses, but also I may need to do those as independent processes going forward.

4. Priming Pumps: Being my first time using pumps (besides in testing with water) I had a bit of trouble getting them primed. I ended up find the best way to prime them for me was to keep the end of the output hose disconnected and hold it up moving it up and down until I got liqiud through the pump and into the output hose. Then connected the end to wherever it was getting pumped into.

5. Lids: I need to get lids for my keggles! I could see the energy being wasted since I didn't have lids on any of my keggles. I will get some lids for next brew day.

That's all I can think of for now, I took some pics but haven't transferred them to the computer yet.

__________________
vince805 is offline
 
Reply With Quote Quick reply to this message
Old 06-25-2012, 06:39 PM   #2
krenshaw
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
krenshaw's Avatar
Recipes 
 
Join Date: Dec 2010
Location: Lancaster, PA
Posts: 1,091
Liked 48 Times on 44 Posts
Likes Given: 27

Default

it took me 3 or so brews with my current setup to be comfortable with it and to actually be able to sit and relax between some of the stages.. as long as you improve and are more comfortable with each progressive brewday you'll be quite happy with the process

__________________

~ A fine beer may be judged with only one sip, but it's better to be thoroughly sure.

DOWN THE HATCH BREWING
Stainless Hop Spider | Wooden Brew Rig | Dual Hinge Keezer Build

Primaries.. oxy :-(
Keg 1: Apfelwein | Keg 2: BlackEyePA version2 | Keg 3: Summer Saison
Bottles: lots full and even more empty

krenshaw is online now
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Brew day complete.....thoughts??? brentt03 All Grain & Partial Mash Brewing 6 04-04-2011 02:49 PM
First AG brew today, 3rd brew ever. Need thoughts/help Boiled_ice All Grain & Partial Mash Brewing 6 03-14-2011 11:40 PM
Brew Stand Build **PICS** Peligro28 All Grain & Partial Mash Brewing 8 09-15-2010 02:14 AM
First thoughts after first AG brew 98EXL All Grain & Partial Mash Brewing 21 10-27-2007 04:02 AM
Brew Stand Jeremy981 All Grain & Partial Mash Brewing 2 04-24-2007 05:51 PM



Newest Threads

LATEST SPONSOR DEALS