Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Thinking about going AG? Don't be afraid.

Reply
 
LinkBack Thread Tools
Old 11-27-2009, 12:11 AM   #1
aubrey
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Acworth, Ga
Posts: 247
Liked 2 Times on 1 Posts
Likes Given: 1

Default Thinking about going AG? Don't be afraid.

I just popped my AG cherry last night, and wanted to post a message for those perusing this forum thinking about going AG.

It's easy to read some of the more advanced posts in here and think that AG is really hard and you can't do it. However, those conversations are just that - advanced conversations of experienced AG brewers trying to perfect their technique.

Going AG added two hours to my brew-day. Two. And they weren't a hard 2 hours, it was mostly about waiting. There's a little math and calculations to do up front to know how much water to use, and proper temperatures, but aside from that its not any harder than extract.

As for equipment, much like above its easy to see other people's AG setups and think you need all kinds of fancy equipment. Not true. I converted a Igloo Cube cooler that I got at target for $20, and $20 worth of parts at the hardware store (went with the stainless braid method). You don't need any fancy manifolds and such to get your first AG brew under your belt. Keep it simple for your first go-round and move on to fancier things as you get better at it. Also, I didn't have a HLT, or at least not a separate one. My Boil Kettle and my HLT were the same thing. I Lautered into my bottling bucket while my BK was being used as my HLT, once done I poured the wort from the bottling bucket into my BK and off to my boil. Edit: I forgot to mention that I don't have a chiller of any type (yet) either. I put my BK into a tub full of cold water and just wait. If my tap water is on the warm side, or I'm feeling impatient, I'll freeze a few gallon jugs of water, sanitze the outside of one and drop it in the kettle, and drop the others into the tub of water to speed up the process a little. The bobbing of the jug in the BK helps by circulating the wort a little, too. end edit

Anyways, that was all. I just wanted to post as someone who was intimidated but decided to go for it anyways. It was way way easier than I thought it was going to be, and was actually a pretty relaxing experience. And I managed to get 83% efficiency on my first try.

Anyways, that's all. I hope this is helpful to get other new AG brewers started.

__________________
Elkins Creek Brewing Company
On Deck:
Primary: Air
Secondary: Bavarian Hefewizen (extract)
Bottle: Blue Moon clone, Sam Adams Boston Ale Clone, Christmas Chocolate Stout (All Grain)
Keg: AHS West Coast Pale Ale, BierMuncher's Centennial Blonde (All Grain)

Last edited by aubrey; 11-27-2009 at 02:53 PM.
aubrey is offline
2
People Like This 
Reply With Quote Quick reply to this message
Old 11-27-2009, 12:28 AM   #2
Bernie Brewer
Grouchy Old Fart
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Bernie Brewer's Avatar
Recipes 
 
Join Date: Feb 2006
Location: Eldorado, WI
Posts: 7,539
Liked 109 Times on 50 Posts
Likes Given: 2

Default

+1000.

Ag is really easy, and you can do it on the cheap. I converted a bottling bucket to a rudimentary MLT for about $3. A bought a plastic colander, cut the lip off, and stuffed into the bottling bucket just above the spigot. And my boil kettle did double-duty as an HLT, also. I wrapped an old blanket around it to help hold temps. It wasn't the most efficient setup, but it got my AG ball rolling.

And the terminology is pretty simple, too:

Mash= soak
Sparge= rinse

Lauter= strain

YOU CAN DO IT!!!!

__________________
I like to squeeze the nickle until the buffalo craps-mt rob

"Why don't we get drunk and screw?" Jimmy Buffett
Bernie Brewer is offline
 
Reply With Quote Quick reply to this message
Old 11-27-2009, 12:46 AM   #3
Mountainbeers
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2009
Location: Morgantown, WV
Posts: 510
Default

How did you cool your wort?

__________________
Streamline Brewing Company
"You can't be a real country unless you have a beer and an airline - it helps if you have some kind of a football team or some nuclear weapons, but at the very least you need a beer." - Frank Zappa

On Deck: Apfelwein
Fermenting: Oatmeal Stout
Conditioning:
Drinking:
Mountainbeers is offline
 
Reply With Quote Quick reply to this message
Old 11-27-2009, 02:34 AM   #4
OHIOSTEVE
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2009
Location: SIDNEY, ohio
Posts: 3,343
Liked 51 Times on 48 Posts
Likes Given: 26

Default

Quote:
Originally Posted by Mountainbeers View Post
How did you cool your wort?
That is about all that is stopping me from going all grain....I have even considered doing no chill because of it.
__________________
Quote:
Originally Posted by Mikethepoolguy View Post
I started brewing 69 days ago, 35 gal so far. SWMBO hasnt complained yet! Better than the hookers, gambling, and crack I used to do, I guess.
BALDGUT BREWS
OHIOSTEVE is offline
 
Reply With Quote Quick reply to this message
Old 11-27-2009, 02:53 AM   #5
Bernie Brewer
Grouchy Old Fart
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Bernie Brewer's Avatar
Recipes 
 
Join Date: Feb 2006
Location: Eldorado, WI
Posts: 7,539
Liked 109 Times on 50 Posts
Likes Given: 2

Default

I had already purchased an IC before starting AG, so it was no biggie for me.

__________________
I like to squeeze the nickle until the buffalo craps-mt rob

"Why don't we get drunk and screw?" Jimmy Buffett
Bernie Brewer is offline
 
Reply With Quote Quick reply to this message
Old 11-27-2009, 03:14 AM   #6
waldoar15
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: Ohio
Posts: 683
Liked 7 Times on 6 Posts

Default

I've got my first two all grains still in primary and will probably do another this weekend sometime.

Don't know if they're drinkable though. :P

__________________
waldoar15 is offline
 
Reply With Quote Quick reply to this message
Old 11-27-2009, 03:16 AM   #7
zzees
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2009
Location: Parker, Colorado
Posts: 22
Default

I have been looking to go AG, but it looks ominous to me. but you give me hope. I'll hit up my Local brew store and pick up a cooler dealio.

I have everything I need to brew extract plus a few extras, ei wort chiller. Is there anything else I would need?

__________________
On Deck:Apple Amber Ale
Primary: Apple Honey Mead
Secondary:
In Bottles: All Empty, thanks the mead that's taking forever.
Beers we have known and loved: Amber Ale.
zzees is offline
 
Reply With Quote Quick reply to this message
Old 11-27-2009, 03:34 AM   #8
Bdogg
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Edmonton, AB
Posts: 98
Liked 1 Times on 1 Posts

Default

Totally agree with the OP.

I was initially skeptical about having to fabricate a bunch of metal parts together to build a mash tun. I bought a 47qt picnic cooler and the braided stainless steel and it sat there for weeks. Then one day I decided to play around and learned that if I simply fed in a 5/8" OD vinyl tube through the actual water drain hole (that just pops open to let melted ice out), the tube was only slightly bigger than the hole, and just needed to be forced in and it sealed all on its own, no BS required. Filled the cooler with hot water and left it for 2 hours, came back - not a drop had leaked. My first time doing AG, the only thing that was a pain with that setup was that I had to tilt the cooler up on its side to get all the liquid out. No big deal. Didn't leak that time either.

Another thing I wasn't looking forward to is building either of two types of a complicated looking wort chiller. Instead of chopping up hoses and trying to find things that would fit my sink, I just build an immersion chiller with a $10 100gph bird bath pump from home depot that I put in a tub full of ice water and just circulated it (although there is an ice machine in my building which made that part easier). No soldering, fittings, or dicking around. It took 5 minutes to assemble, cost very little, and my wort went from boiling to 70 degrees in about 15 minutes. Stove top worked fine for the boil. Slow, but hey, I'm a patient guy.

There is simplicity to be had in the process if you are just looking to try it out. I think all the extra equipment cost me about $100 in total (10 gallon pot, cooler, pump, copper tubing, candy thermometer) and if you hated doing it and wanted to go back to extract, you could easily sell off most of what you bought on craigslist or kijiji and recover most of your cost anyway. And if you love it, you can get to work building some of the crazy intense **** you see all over this forum

__________________
Bdogg is offline
 
Reply With Quote Quick reply to this message
Old 11-27-2009, 04:25 AM   #9
permo
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2009
Location: North Dakota
Posts: 2,711
Liked 21 Times on 20 Posts

Default

I just started brewing in september, I brewed exactly 3 extract brews and then did some research, converted a 48Q cooler and switched to all grain. It is a very simple process and not all that complicated. 1-1.5 quarts per pound of grain on the mash, the same or even more water for the sparge and a big pot. In the last month I have brewed 5 all grain batches and all worked great. I have some advice from my learnings:


One thing that i find VERY important with all grain brewing is a very accurate digital thermometer. THe difference between a beer mashed at 147 degrees and 157 degrees is major and it could cause you to ruin a kolsh or brew a very dry oatmeal stout. I have found that Taylor makes some of the most accurate and reliable models. I monitor the temp of my mash througout the 60-90 minutes....if I fall 2 degrees below my target I add some hot water but if you properly pre-warm your tun the heat loss is less of an issue.

The grind of your grain will greatly affect your efficiency I error on the side of a finer grind and have yet to get a stuck sparge or anything like that

When in doubt, use more water as opposed to less and boil it down

and my favorite thing about all grain brewing

FIRST WORT HOPPING


This all being said, I did brew some quality extract brews, but the 1-2 pounds of speciality grains really limits the complexity and malt profile of your beer. There is no extract that can replicate the complexity of using 10-12 pounds marris otter as a base.

__________________
permo is offline
 
Reply With Quote Quick reply to this message
Old 11-27-2009, 04:48 AM   #10
Mountainbeers
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2009
Location: Morgantown, WV
Posts: 510
Default

The wort chiller is the only thing holding me back as well. I plan on going shopping in the morning for a turkey fryer on the best day of the year for such a purchase.

I guess I'll just forgo a batch or two so that I can save a few bucks for an IC.

__________________
Streamline Brewing Company
"You can't be a real country unless you have a beer and an airline - it helps if you have some kind of a football team or some nuclear weapons, but at the very least you need a beer." - Frank Zappa

On Deck: Apfelwein
Fermenting: Oatmeal Stout
Conditioning:
Drinking:
Mountainbeers is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Afraid of my Glass!!! Henny Equipment/Sanitation 20 02-11-2009 08:58 PM
Afraid to drill dockmasterjc Bottling/Kegging 2 01-22-2009 02:52 PM
Who is afraid of HSA? Baldy_Beer_Brewery Recipes/Ingredients 28 08-25-2008 07:25 PM
For all you that are afraid of O2... keg fermenting knipknup Bottling/Kegging 14 05-23-2007 07:13 PM
Houston, Be Afraid... El Pistolero General Chit Chat 9 11-16-2005 11:31 PM