Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   All Grain & Partial Mash Brewing (http://www.homebrewtalk.com/f36/)
-   -   Tell me about your brew rig (http://www.homebrewtalk.com/f36/tell-me-about-your-brew-rig-351685/)

cabron99 09-02-2012 05:39 PM

Tell me about your brew rig
 
Am about to invest in a brew rig, probably 15-2500 bux, and am doing my due diligence on the internet. Won't be building as I'm too busy/old and would rather spend my time brewing. Flexibility is important, as I like to experiment with different brews. I would appreciate input from those of you who purchased their rigs relatively complete. I prefer 5 gallon batches, but 10 isn't out of the question. 5 gallons because I like to brew often. I've been brewing AG for almost 2 years and have a eclectic collection of gear. Will probably buy all new. Hope you can help me out.

Pat

SeattleMatt 09-02-2012 10:37 PM

I built my rig but I have a little input. You can buy a 1 bbl 4 vessel system from stout tanks in Portland for $3100. I'm sure you could get a half bbl system for $2500 or less. That includes a conical. If I had the cash (and could convince the wife) I'd buy one.
http://conical-fermenter.com/about/attachment/1-bbl-brewing-system/

cabron99 09-03-2012 05:25 PM

Come on, guys. Little help here!

November 09-03-2012 08:35 PM

I welded my own, but from what I've seen brewsteel does fine work.
www.brewsteel.com

helibrewer 09-04-2012 05:13 AM

These guys are in SoCal you could will call and save on shipping....
http://www.brewstands.com/

EDIT: I built my single tier, no weld but these guys look good...I think they are in our Vendor area.

cabron99 09-04-2012 05:40 AM

Quote:

Originally Posted by helibrewer (Post 4384846)
These guys are in SoCal you could will call and save on shipping....
http://www.brewstands.com/

EDIT: I built my single tier, no weld but these guys look good...I think they are in our Vendor area.

Tks, Helibrewer. Checking them out.

Dougie63 09-04-2012 09:40 AM

I built mine from bedframes (no weld) cost about 360.00 with kegs/filter/pump/hoses/fittings/fasteners ect bedframes were free

integra93ls 09-05-2012 11:45 PM

Quote:

Originally Posted by Dougie63
I built mine from bedframes (no weld) cost about 360.00 with kegs/filter/pump/hoses/fittings/fasteners ect bedframes were free

That's what I'm sound also. Just cut the bed frames . Now I'm drilling the holes for bolts. Got frames free n kegs free n my dad works for propane co. So I get free propane n will get all hoses n regulators free. N free chiller

integra93ls 09-06-2012 10:03 PM

1 Attachment(s)
Pic from today. All bolted together just need to get casters n the propane setup

horric29 09-07-2012 02:10 AM

Quote:

Originally Posted by November
I welded my own, but from what I've seen brewsteel does fine work.
www.brewsteel.com

I'd read my build thread... www.richhornberger.com


All times are GMT. The time now is 12:23 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.