The Great Bottle Opener Giveaway

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > SS False Bottoms

Reply
 
LinkBack Thread Tools
Old 07-29-2006, 12:23 AM   #1
Desert_Sky
Feedback Score: 0 reviews
 
Desert_Sky's Avatar
Recipes 
 
Join Date: Mar 2006
Location: Sierra Vista, AZ
Posts: 4,090
Liked 31 Times on 28 Posts
Likes Given: 2

Default SS False Bottoms

As of now, Ive done 5 AG batches. 2 with a SS braid, and 3 with my current SS false bottom. Right now Im not sure if Im going to keep the false bottom in. No matter how much I vorlouf, and how much care I take to make sure the grain bed is set properly, I get grains coming through. The wort will run clear, so I'll open the valve to drain into my kettle, then halfway through....more grains...quite a bit of them too.

Its gotten to the point that I have to strain the wort to get the grains before it goes into the kettle. I didn't have this problem with the SS braid. And my efficiency was a bit higher with the braid as well. So I think Im going to go back to the simpler, and more effective braid. Its funny how something like the 2 dollar braid works so much better than my 25 dollar false bottom.

Anyone else have any problems with their false bottoms?

__________________
Desert Sky Brewing Co.
Sierra Vista, AZ

Last edited by Desert_Sky; 07-29-2006 at 04:29 AM.
Desert_Sky is offline
 
Reply With Quote Quick reply to this message
Old 07-29-2006, 12:30 AM   #2
BootYtRappeR
Feedback Score: 0 reviews
 
BootYtRappeR's Avatar
Recipes 
 
Join Date: Sep 2005
Location: Lewisville, NC
Posts: 299
Default

I'm glad you posted this as I may just stick with the braid. I did my first AG the other day using the SS braid and got zero grains coming through. Also, I only had to recirculate two quarts to get the wort to run clear for both the mash and sparge.

__________________
Primary:
Secondary: PRA
Bottled/Kegged/Conditioning: Munich Dunkel Ale
Drinking:
Up Next:
BootYtRappeR is offline
 
Reply With Quote Quick reply to this message
Old 07-29-2006, 12:32 AM   #3
ajf
Senior Member
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
ajf's Avatar
Recipes 
 
Join Date: Oct 2005
Location: Long Island
Posts: 4,643
Liked 97 Times on 91 Posts
Likes Given: 39

Default

I have a Phil's false bottom, and fly sparge. It works very well for me, and I've never had the problem you described.

If you have better efficiency and no problem with the braid, then the solution seems pretty simple.

-a.

__________________
ajf is offline
 
Reply With Quote Quick reply to this message
Old 07-29-2006, 01:13 AM   #4
James Robert
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2005
Posts: 4
Default

Where do you get this two dollar stainless steel braid?

__________________
James Robert is offline
 
Reply With Quote Quick reply to this message
Old 07-29-2006, 01:23 AM   #5
Beer Snob
Feedback Score: 0 reviews
 
Beer Snob's Avatar
Recipes 
 
Join Date: Dec 2005
Location: Farmington
Posts: 2,034
Liked 4 Times on 4 Posts

Default

We've got the same bottom (and talked about this via PM). I can't say that I have this problem, but I have really not had a lot of experience AG too. I've done two and the first one the tubbing came loose. The last one, a stout, I bottled yesterday. Don't know how many have seen this false bottom, but the holes are pretty small.

If its not getting through the sides, the grain would need a pretty fine crush to go through these holes at the rate Chimone is describing.

__________________
Michael

"Don't worry, have a homebrew." ,"The "Bible"

Cherries in the wheat
Michael's Wheat
Beer Snob is offline
 
Reply With Quote Quick reply to this message
Old 07-29-2006, 01:32 AM   #6
EdWort
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
EdWort's Avatar
Recipes 
 
Join Date: Jul 2006
Location: Bee Cave, Texas
Posts: 11,968
Liked 251 Times on 135 Posts
Likes Given: 7

Default

Quote:
Originally Posted by Chimone
Its funny how something like the 2 dollar braid works so much better than my 25 dollar false bottom.
It sounds like the grain is somehow getting around the side of the false bottom. Thanks for the info, I'm just now building my Cooler MLT. I'm using a mini keg bung with 1/2" OD vinyl hose. I'm inserting a 3/8" ID copper coupler inside the hose where I'll attach the stainless sleeve so the clamp won't crimp or crush it.
__________________

Cheers,

EdWort

Haus Pale Ale, Bavarian Hefeweizen, Robust Porter, Oktoberfest Ale, Wounded Knee IPA, Rye IPA, BCB IPA, Kolsch, Apfelwein

EdWort is offline
 
Reply With Quote Quick reply to this message
Old 07-29-2006, 04:52 AM   #7
Denny's Evil Concoctions
Grande Megalomaniac
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Denny's Evil Concoctions's Avatar
Recipes 
 
Join Date: Oct 2005
Location: West Kelowna BC, Canada
Posts: 7,767
Liked 50 Times on 42 Posts

Default

Some of the false bottomes have a small space near the sides where the two halves fold ( where the hinges mount). COuld be getting by there.

A friend has a phils false bottom and he gets debry for the first few cyclings of the runoff butit usually stops by then. I went with a round manifold with slots cut in the bottom and I have no problems after the first cycling of runnoff. Manifold was cheaper and I have virtually no dead space at the bottom of the mash tun.

__________________

I may not be an expert, but I did stay at a Holiday Inn Express........ 6 months ago.

http://www.homebrewtalk.com/f39/denn...9/#post1766281

http://groups.homebrewtalk.com/Tapro...ook_Repository

Denny's Evil Concoctions is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Finished with false bottoms!! SenorWanderer All Grain & Partial Mash Brewing 20 11-25-2007 02:10 PM
My ESB, false bottoms & dry yeast hoplobster All Grain & Partial Mash Brewing 3 08-06-2007 12:38 AM
FREE false bottoms!!!* Sir Humpsalot Equipment/Sanitation 20 03-27-2007 02:56 PM
SS false bottoms Brewpilot Equipment/Sanitation 9 02-13-2007 09:26 PM