Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > SS braided hose
Reply
 
LinkBack Thread Tools
Old 01-29-2007, 11:35 PM   #11
D*Bo
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2006
Location: North Attleboro, MA
Posts: 459
Default

I inserted a razor blade between the braid and cut the tubing inside. I worked my way around untill I seperated it and slid the hose out of the braid.
A bit of a pain, and it mangles the braid at the connector a little, but it still worked great. Bettter than the Bazooka-T

__________________
PrimaryBaltica 9
Secondary British all Amarillo IPA, Calypso
Conditioning Decoction maddness, FlyingJess Ale
Drinking Oatmeal Chocolate Stout, Oaked Bourbon Chocolate Stout, Dry Mead)
Up NextScottish ale and Dopple Bock

Always ready for the wack snack attack, I carry sandwiches around in a straight edge style JanSports backpack.

Support your local businesses
D*Bo is offline
 
Reply With Quote Quick reply to this message
Old 01-30-2007, 11:23 AM   #12
abracadabra
Feedback Score: 0 reviews
 
abracadabra's Avatar
Recipes 
 
Join Date: Dec 2006
Location: Newnan, Georgia
Posts: 1,925
Liked 6 Times on 6 Posts

Default

Quote:
Originally Posted by D*Bo
I inserted a razor blade between the braid and cut the tubing inside. I worked my way around untill I seperated it and slid the hose out of the braid.
A bit of a pain, and it mangles the braid at the connector a little, but it still worked great. Bettter than the Bazooka-T
That's a great idea. Using a pointed blade exacto knife I could puncture the hose in enough places to weaken it to the point where it would easily break
__________________
abracadabra is offline
 
Reply With Quote Quick reply to this message
Old 01-30-2007, 11:36 AM   #13
chillHayze
Feedback Score: 0 reviews
 
chillHayze's Avatar
Recipes 
 
Join Date: Mar 2006
Location: Columbus OH
Posts: 1,589
Liked 6 Times on 6 Posts

Default

Quote:
Originally Posted by nkonkie
That's a great idea. Using a pointed blade exacto knife I could puncture the hose in enough places to weaken it to the point where it would easily break
Just.....might....work!
__________________
RDWHAHB
Every little thing is gonna be alright.

chillHayze is offline
 
Reply With Quote Quick reply to this message
Old 01-30-2007, 03:52 PM   #14
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,015
Liked 978 Times on 653 Posts
Likes Given: 28

Default

That's certainly one way to save $2.50. In most cases you'd use a female NPT to hose barb fitting $1.75 and a stainless hose clamp ($.75). As long as it doesn't take you more than 10 minutes to get the hose out, you'll feel like you've come out ahead.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Old 01-30-2007, 04:18 PM   #15
Buford
Feedback Score: 0 reviews
 
Buford's Avatar
Recipes 
 
Join Date: Oct 2006
Location: Richmond, VA
Posts: 1,415
Liked 5 Times on 5 Posts

Default

I used compression fittings when I made my braid (in a loop configuration). It looks neater and there aren't any SS wire bits to get stuck in your hand once it's put together.

__________________
Flying Dutchman Unlimited Ale Works
Buy my crap!


FERMENTING: ---
KEGGED/IN STORAGE: ---
KEGGED/ON TAP: ---

DIY STUFF: Sanyo 4912 kegerator conversion
Buford is offline
 
Reply With Quote Quick reply to this message
Old 01-30-2007, 04:40 PM   #16
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,015
Liked 978 Times on 653 Posts
Likes Given: 28

Default

How does the compression nut actually hold onto the braid? Do you have the reinforcing inserts stuck inside to provide a backing? Wasn't the compression tee like $10?. I would have used a copper Tee with hose clamps to go cheaper. The clamps actually cover the fraying ends of the braid quite well. Maybe with the inflated price of copper it would be a break even deal.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Old 01-30-2007, 06:14 PM   #17
Buford
Feedback Score: 0 reviews
 
Buford's Avatar
Recipes 
 
Join Date: Oct 2006
Location: Richmond, VA
Posts: 1,415
Liked 5 Times on 5 Posts

Default

I don't remember how much it cost, I just lumped it in with a bunch of other stuff I was buying at the time. The reinforcing inserts are in there. The hose braid was from a 1" diameter hose, so when compressed in the nut it holds pretty tight - I can't pull it out without unscrewing it.

I wasn't trying to go cheap as possible, I just wanted something that would work and look neat and wasn't paying as much attention to price. My setup is probably a little pricier than a system that would work just as well done another way.

__________________
Flying Dutchman Unlimited Ale Works
Buy my crap!


FERMENTING: ---
KEGGED/IN STORAGE: ---
KEGGED/ON TAP: ---

DIY STUFF: Sanyo 4912 kegerator conversion
Buford is offline
 
Reply With Quote Quick reply to this message
Old 01-31-2007, 12:46 AM   #18
vasie
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2006
Location: Olathe, Kansas
Posts: 115
Likes Given: 1

Default

Buford, how did you connect your compression joint with the bulkhead.. You have a closeup picture of that? I tried to do the same thing recently and I certainly proved that I am a better brewer than plumber.

__________________
Primary:
Keg: Beta Wheat
Tap Alpha: Jamil's Black Widow Porter
Tap Beta: Beta Blonde

Check out my progress.

Website in progress.
vasie is offline
 
Reply With Quote Quick reply to this message
Old 01-31-2007, 04:01 AM   #19
Buford
Feedback Score: 0 reviews
 
Buford's Avatar
Recipes 
 
Join Date: Oct 2006
Location: Richmond, VA
Posts: 1,415
Liked 5 Times on 5 Posts

Default

There's a little piece of plastic/vinyl tubing slipped in the compression tee part that connects to the hose barb on the bulkhead. Although the OD of the tubing piece is almost the same as the ID of the compression nut it's not a tight fit and will slip out if you pull on it, but it doesn't need to be watertight. The braid is compressed a little when it's in the mash tun so it stays in place when connected to the bulkhead due to the pressure against it. You can turn the tun upside down and it won't fall out.

__________________
Flying Dutchman Unlimited Ale Works
Buy my crap!


FERMENTING: ---
KEGGED/IN STORAGE: ---
KEGGED/ON TAP: ---

DIY STUFF: Sanyo 4912 kegerator conversion
Buford is offline
 
Reply With Quote Quick reply to this message
Old 01-31-2007, 02:59 PM   #20
vasie
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2006
Location: Olathe, Kansas
Posts: 115
Likes Given: 1

Default

Ok, when I wasn't able to get a tight seal around my vinyl tubing (same setup as yours), I was certain that I had screwed up the build instructuctions. Thanks.

__________________
Primary:
Keg: Beta Wheat
Tap Alpha: Jamil's Black Widow Porter
Tap Beta: Beta Blonde

Check out my progress.

Website in progress.
vasie is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Braided supply hose or copper John Long All Grain & Partial Mash Brewing 38 08-19-2009 11:07 PM
Stainless Braided hose issue BubbaK All Grain & Partial Mash Brewing 9 08-06-2009 10:30 PM
Braided hose or Manifold? Which is better? Beavdowg All Grain & Partial Mash Brewing 45 05-25-2009 05:18 PM
Braided Hose trubador All Grain & Partial Mash Brewing 11 05-09-2007 08:11 PM
Stainless Braided hose covers Truble Equipment/Sanitation 10 09-16-2006 06:45 AM