Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Sparging Question
Reply
 
LinkBack Thread Tools
Old 10-16-2013, 02:14 AM   #1
ZenFitness
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2013
Posts: 118
Liked 2 Times on 2 Posts
Likes Given: 11

Default Sparging Question

As I understand it, the two basic methods of sparging at home are fly sparging (basically sprinkling water over the grain bed at a slow rate consistent to what is draining out into the boil kettle) and batch sparging (draining the mash tun, refilling it with sparge water, mixing the grains, let them settle, then drain).

Question - I have a 10 gallon water cooler mash tun and another 10 gallon cooler for sparge water. If I run a hose from the sparge water cooler to a piece of punctured tinfoil on the top of the grain bed in the mash tun and introduce sparge water very slowly, is that considered a form of fly sparging?

Or am I confused here?

__________________
ZenFitness is offline
 
Reply With Quote Quick reply to this message
Old 10-16-2013, 03:11 AM   #2
Pie_Man
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Pie_Man's Avatar
Recipes 
 
Join Date: Aug 2011
Location: Gainesville, FL
Posts: 1,346
Liked 134 Times on 126 Posts
Likes Given: 13

Default

Yes, that is a form of fly sparging. I'd ensure the hose is food grade, and you may want to consider a sparge arm that's a little sturdier than tin foil.

I batch sparge in my 10 gallon round cooler because I great efficiency, it's easy, and it takes less time than fly sparging. Nothing wrong with fly sparging though if that's what you want to do.

__________________
Pie_Man is offline
 
Reply With Quote Quick reply to this message
Old 10-16-2013, 03:37 AM   #3
acidrain
Feedback Score: 3 reviews
Recipes 
 
Join Date: Jul 2012
Location: Seattle, Washington
Posts: 1,661
Liked 132 Times on 114 Posts
Likes Given: 28

Default

Not sure the cooler will make a good HLT... usually, fly spargers use very hot water, and those coolers will deform/impart plastic taste at higher temps. Better read up on that.
I batch sparge, but still, I use a SS kettle with electric hot water tank element installed for a dedicated HLT. Might think about using a metal pot instead.

__________________

Keg #1: Bourbon/Oak Vanilla Porter
Keg #2: Cascadian Stout
Keg #3: BMC West
Bottled: Mjolnir Mead, Lazy Daze Hefe, The Bollocks ESB, Dark Matter stout.

acidrain is offline
 
Reply With Quote Quick reply to this message
Old 10-16-2013, 07:34 PM   #4
dyqik
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2013
Location: Arlington, MA, Massachusetts
Posts: 611
Liked 79 Times on 71 Posts
Likes Given: 1

Default

Quote:
Originally Posted by acidrain View Post
Not sure the cooler will make a good HLT... usually, fly spargers use very hot water, and those coolers will deform/impart plastic taste at higher temps. Better read up on that.
I batch sparge, but still, I use a SS kettle with electric hot water tank element installed for a dedicated HLT. Might think about using a metal pot instead.
Coolers work fine as HLTs, and many of the online hone brew shops sell two cooler systems as a HLT/MLT combination. I've noticed no plastic tastes with my home depot cooler and they are sold for hot water as well as cold water tanks.

Fly sparge water shouldn't be much above 175f, to give 168f or so in the mash tun.
__________________
dyqik is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Question on fly sparging Fishing73 All Grain & Partial Mash Brewing 11 12-20-2011 03:11 AM
Question about fly sparging maltMonkey All Grain & Partial Mash Brewing 20 12-03-2011 05:10 PM
Fly Sparging Question dutch101st All Grain & Partial Mash Brewing 8 05-04-2009 01:17 AM
Sparging Question LooyvilleLarry All Grain & Partial Mash Brewing 4 10-23-2008 04:48 PM
Sparging question? GIusedtoBe All Grain & Partial Mash Brewing 12 10-17-2008 11:21 AM