Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Sparge Temp and efficiency
Reply
 
LinkBack Thread Tools
Old 01-31-2011, 04:08 PM   #1
Cantaloupe
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: California
Posts: 28
Default Sparge Temp and efficiency

We fly sparge using a gravity system and a basic ring shaped sparge arm. We first drain the mash until the level is one inch above the grain bed and begin our sparge. We use 170 degree water to sparge but when it mixes with the ~150 degree water from the mash the temperature obviously drops significantly. Should we be hitting it with much hotter water to bring the temperature up as we begin the sparge and then continue the sparge with 170 degree water. I guess this would be like a mashout, but seems like a lot of water to add to bring all the mash water up to that temperature. Should we be draining the mash more? Our efficiencies on our first 2 all grain batches have been around 70% using milled malts from morebeer and homebrewersoutpost. What are some other ways to increase efficiences?

__________________
Cantaloupe is offline
 
Reply With Quote Quick reply to this message
Old 01-31-2011, 05:12 PM   #2
MalFet
/bɪər nərd/
HBT_LIFETIMESUPPORTER.png
Feedback Score: 1 reviews
 
MalFet's Avatar
Recipes 
 
Join Date: May 2010
Location: NYC / Kathmandu
Posts: 8,205
Liked 1231 Times on 818 Posts
Likes Given: 561

Default

170 is something of a magic number for mashing. If you get higher than that, you solubilize tannins and can have astringent beer. The lower the temp, though, the less effectively you're pulling sugar out of the mash. Ideally, you'd keep your sparge right at 170F. This means adding water above 170F.

I'm no fly sparger, but what you describe sounds right as far as volume goes.

__________________
MalFet is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help with No Sparge Efficiency Reelale All Grain & Partial Mash Brewing 67 04-17-2011 06:26 PM
Better efficiency with less sparge water? Randar All Grain & Partial Mash Brewing 7 03-17-2010 08:26 PM
Efficiency with Fly-Sparge SteveG All Grain & Partial Mash Brewing 13 11-15-2008 06:44 AM
Some AG Q's: Efficiency/Mashout/Sparge bgcoving All Grain & Partial Mash Brewing 7 06-01-2008 12:48 AM
Longer Sparge - Better efficiency sonvolt All Grain & Partial Mash Brewing 28 01-12-2007 04:39 PM