Electric Brewing Supply 30A BCS Giveaway - Last Chance to Enter!


Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Simple Cheap All Grain (takes some muscle)
Reply
 
LinkBack Thread Tools
Old 08-13-2011, 02:12 PM   #1
homebrewin
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Fuquay Varina, NC
Posts: 16
Liked 1 Times on 1 Posts

Default Simple Cheap All Grain (takes some muscle)

This is my simple inexpensive way of brewing all grain beer, i've been using this method for about 6 months now and achieve 80% or better efficiency with grain bills of up to 16# for 5 gallon batches. This method is not for everyone as it requires some heavy lifting. A big shout out to deathbrewer for his all grain stove top inspiration.

First things first:


This can be substituted for a homebrew if you'd like

Then heat your mash water, for this brew i used 1.5qt/pound, this recipe was 12 pounds plus some pumpkin so i went for a thinner mash, this is an aluminum pot (i've never had an issue)

I wanted a mash temp of 154 i know that with my system i lose about 15 degrees once mashed in, so i heated to 170
Now grab a plain jane unmodified cooler and add your mash water to it.


Slowly add your grain while stiring, once mashed in check your temp, throw the lid on and don't touch it.

My thermometer is the one that came with the burner and pot so it's for oil but its accurate and i hit my number on the nose

With 15 minutes left in the mash start your sparge water, again i know that i lose 15 degrees so i heated to 185. Typically, your going to lose 1 gal of water to absorption and 1 gal to the boil, this example was a little different because i used pumpkin in the mash and it absorbs the heck outta some water, so, for this example i started with a 5 gal mash -1 for absorption -1 for boil off and -1 because of the pumpkin, i sparged with 3 gallons.
After your mash time of 60+ minutes, grab a bucket, i used my fermentor, line it with a large mash/sparge bag or paint strainer, i didn't have any help with this brew so i used a bungee cord to hold it in place. Now for the heavy lifting, grab your mash cooler and carefully pour it through the sparge bag in the bucket. It can get messy, in this example i did spill a tiny bit, however i still hit all my numbers and ended at 80% efficiency.

(sorry this pic wouldn't upload with the correct orientation)
Now grab the bag and let it drain into the bucket, this is heavy and takes a few minutes, i used to have a giant colander that worked really well for holding the bag. Once it has stopped draining for the most part, dunk the bag in your brew pot with the sparge water, give it a good stir, and let it sit 10 minutes.


After the 10 minutes, tea bag your grain a couple times, give it another stir, and the drain, twist, squeeze the heck out of it until it's pretty much not dripping, remember every last drop is sweet sweet wort. Toss your grain aside.
Combine your "first runnings" in the brew pot and get your boil on.

Cheers!

__________________
homebrewin is offline
 
Reply With Quote Quick reply to this message
Old 08-13-2011, 02:58 PM   #2
Red_Zeppelin
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Fort Collins, Colorado
Posts: 14
Liked 1 Times on 1 Posts

Default

Just to play devils advocate: Why not splurge the $15-$20 on converting that cooler? That seems way more worthwhile than lifting a cooler full of water/grains every batch to pour through a paint strainer.

__________________
Red_Zeppelin is offline
 
Reply With Quote Quick reply to this message
Old 08-13-2011, 03:14 PM   #3
homebrewin
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Fuquay Varina, NC
Posts: 16
Liked 1 Times on 1 Posts

Default

Cause then I don't have a cooler to keep my beer in, and cause I already had a cooler, and because I'm cheap

__________________
homebrewin is offline
toolboxdiver Likes This 
Reply With Quote Quick reply to this message
Old 08-13-2011, 03:18 PM   #4
Red_Zeppelin
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Fort Collins, Colorado
Posts: 14
Liked 1 Times on 1 Posts

Default

Cheers then

__________________
Red_Zeppelin is offline
 
Reply With Quote Quick reply to this message
Old 08-13-2011, 04:08 PM   #5
_JP_
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Woodstock, GA
Posts: 311
Liked 4 Times on 4 Posts

Default

For anyone out there wanting to buy all new, that paint strainer might fit a 5-gal cylindrical cooler.

Batch before last was 15lbs, and I fit that comfortably in my 5-gal cooler. At 80%, that'd be a 1.090 beer. I got 1.088 out of it.

__________________

Working on:
summer gardening

Upcoming projects:
NG line for outdoor burner

_JP_ is offline
 
Reply With Quote Quick reply to this message
Old 08-13-2011, 04:25 PM   #6
homebrewin
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Fuquay Varina, NC
Posts: 16
Liked 1 Times on 1 Posts

Default

I used one of those 5 gal cylinder type ones a friend had before and worked great also, but can get tricky with larger grain bills, if you do use one of those you can just mash with the grain bag already in the cooler and just lift out the grain to sparge, about 12# max of grain @1.25qt/pound will fit in a 5 gal cylinder cooler

__________________

homebrewin is offline
 
Reply With Quote Quick reply to this message
Old 08-13-2011, 04:40 PM   #7
BBKing
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: Canton, IL
Posts: 1,157
Liked 52 Times on 52 Posts
Likes Given: 12

Default

Another great tutorial.

Kudos

__________________
Black Sheep Brewery
Untamed and unapologetic
BBKing is offline
 
Reply With Quote Quick reply to this message
Old 08-14-2011, 04:18 AM   #8
erockomania
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: SF CA
Posts: 307
Liked 5 Times on 5 Posts
Likes Given: 7

Default

Nice

__________________
erockomania is offline
 
Reply With Quote Quick reply to this message
Old 08-14-2011, 05:23 AM   #9
wilserbrewer
BIAB Expert Tailor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 9 reviews
 
wilserbrewer's Avatar
Recipes 
 
Join Date: May 2007
Location: Jersey Shore, Jersey
Posts: 7,000
Liked 506 Times on 420 Posts
Likes Given: 9

Default

Way to go...

__________________
wilserbrewer BIAB bags
custom sized BIAB Bags, hop bags and ratchet pulleys at reasonable prices


Http://biabbags.webs.com/

Corona Mill Bucket System V. 2
wilserbrewer is offline
 
Reply With Quote Quick reply to this message
Old 08-14-2011, 01:24 PM   #10
Hex
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: Granite Bay, CA
Posts: 1,048
Liked 23 Times on 23 Posts
Likes Given: 24

Default

LIBA? Lauter in a bag? I've done this once and it works. Except I got a two quart SS pot from the kitchen to ladle the mash into the mesh lined bucket.

__________________
Hex is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Simple All-Grain Mash in a Bag Technique: Illustrated jldc All Grain & Partial Mash Brewing 9 09-07-2010 04:41 PM
All grain is crazy cheap! mimo777 All Grain & Partial Mash Brewing 46 08-31-2010 03:45 AM
Need a simple recipe for first try at all grain somedudefromneworleans All Grain & Partial Mash Brewing 7 02-08-2009 11:22 PM
Do you think all grain takes longer to condition and mature? Nostrildamus All Grain & Partial Mash Brewing 8 09-21-2007 10:57 AM
cheap grain mill alemonkey All Grain & Partial Mash Brewing 4 04-08-2006 04:07 PM