New Giveaway - Wort Monster Conical Fermeneter!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Ro water no ph buffer?




Reply
 
LinkBack Thread Tools Display Modes
Old 02-19-2012, 11:34 PM   #1
Gustavo
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: , ca
Posts: 385
Default Ro water no ph buffer?

K so I've been trying to read up on maintaining your ph on AG, strike water. I was wondering if you buy to water from either a dispensing water machine or pre packaged, do you stll need to adjust your ph. Also looking at my water profile, how do I determine if my ph is high?



__________________
Gustavo is offline
 
Reply With Quote Quick reply to this message
Old 02-19-2012, 11:40 PM   #2
Yooper
Frau Admin
Feedback Score: 0 reviews
 
Yooper's Avatar
Recipes 
 
Join Date: Jun 2006
Location: Upper Michigan
Posts: 58,585
Liked 3848 Times on 2812 Posts
Likes Given: 640

Default

Yes, you probably need to have some additions to adjust the mash pH.

To guestimate the probable mash pH, spreadsheets are incredibly handy. They are pretty close, and then you can do minor adjustments if needed. I've used EZ water and Brunwater.



__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006
Yooper is online now
 
Reply With Quote Quick reply to this message
Old 02-19-2012, 11:43 PM   #3
Hebby5
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: Wake Forest, NC
Posts: 135
Default

Ask your local water co. for a report. My pH is 8.4 which is very Alkaline. Made a great brown ale without treating it but my first pale ale was very bitter/harsh after taste without treating my tap water. My next batch was another pale ale and I tested it and made a big difference. I still have a tiny bitter after taste and need to dial the water treatment just a bit more but still very good beer.


You may ask your LHBS shop or local Homebrew club for what those folks recommend for your local water.

Good luck.

Chris

__________________
Hebby5 is offline
 
Reply With Quote Quick reply to this message
Old 02-20-2012, 02:37 AM   #4
mattpavone
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2010
Location: Brantford, Ontario
Posts: 25
Default

Water additions depend a great deal on what type of beer you are brewing as well. In general the darker the beer the more you will have to adjust if you use RO water. As Hebby5 said, the dark brown was great, but the pale was a bit off.

You are looking for your local water's hardness, or alkalinity, that's usually shown as ppm CaCO3.

Hope that helps.

__________________
MattyP

BrewEQ Brewing Salt Blends
http://www.BrewEQ.com
mattpavone is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes