Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > PLEASE HELP! Need help with pre-boil gravity ASAP!
Reply
 
LinkBack Thread Tools
Old 02-13-2013, 08:15 PM   #1
Bisco_Ben
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Glen Cove, NY
Posts: 326
Liked 10 Times on 10 Posts
Likes Given: 50

Default PLEASE HELP! Need help with pre-boil gravity ASAP!

Hey guys, brewing an imperial white now that I am aiming to be a gravity of 1.092. I did a pre-boil reading for the first time and when aiming for 5.5 gallons, the equation gave me 5.75 gallons. What does this mean and what should I do?! Any help is VERY MUCH appreciated!

__________________
Bisco_Ben is offline
 
Reply With Quote Quick reply to this message
Old 02-13-2013, 08:17 PM   #2
brettg20
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Newport Beach, CA
Posts: 691
Liked 83 Times on 59 Posts
Likes Given: 7

Default

You could turn up the burner so your evaporation rate is higher to burn off the extra .25 gal.

__________________
brettg20 is offline
 
Reply With Quote Quick reply to this message
Old 02-13-2013, 08:18 PM   #3
Bisco_Ben
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Glen Cove, NY
Posts: 326
Liked 10 Times on 10 Posts
Likes Given: 50

Default

If needed, i have a reading of 1.071 with 7.5 gallons. Plan to boil 2 hours down to 5.5 gallons and want to hit 1.092

__________________
Bisco_Ben is offline
 
Reply With Quote Quick reply to this message
Old 02-13-2013, 08:20 PM   #4
Bisco_Ben
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Glen Cove, NY
Posts: 326
Liked 10 Times on 10 Posts
Likes Given: 50

Default

My first hop addition is at 60 minutes and boil is just starting now. I have an hour to correct anything so any help would be appreciated.

__________________
Bisco_Ben is offline
 
Reply With Quote Quick reply to this message
Old 02-13-2013, 08:27 PM   #5
Bisco_Ben
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Glen Cove, NY
Posts: 326
Liked 10 Times on 10 Posts
Likes Given: 50

Default

@brettg, i will just boil for another 15 minutes since my evap rate is set at gal/hr. is there anyway for me to make up for that .25 gallon though? Or is it really not worth it and just be happy with 5.25 gallons?

__________________
Bisco_Ben is offline
 
Reply With Quote Quick reply to this message
Old 02-13-2013, 08:33 PM   #6
Bisco_Ben
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Glen Cove, NY
Posts: 326
Liked 10 Times on 10 Posts
Likes Given: 50

Default

Also, if I wind up boiling for an extra 15mins and wind up with 5.25 gal instead of 5.5, how would this affect IBUs?

__________________
Bisco_Ben is offline
 
Reply With Quote Quick reply to this message
Old 02-13-2013, 08:40 PM   #7
ApothecaryBrewing
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2012
Location: Rochester, NY
Posts: 485
Liked 30 Times on 23 Posts
Likes Given: 1

Default

You are going to have a slightly higher IBU if your boil is a little longer due to the fact that your later additions will be recalculated. Instead of a 15 min addition, it would be a 30 min addition and so on.

Nothing detrimental... every brew is an experiment.

__________________
Brewpothecary
ApothecaryBrewing is offline
 
Reply With Quote Quick reply to this message
Old 02-13-2013, 08:55 PM   #8
Bisco_Ben
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Glen Cove, NY
Posts: 326
Liked 10 Times on 10 Posts
Likes Given: 50

Default

@VTrookie, there are no later additions for this beer, only spices added at 5 mins. How would I account for this in beersmith? I figure that I will change my batch size to 5.25 gal, change the efficiency accordingly, and then keep everything else the same (boil an extra 15 minutes and still add bittering hops with 60 minutes left + spices with 5 minutes left). Would this effectively tell me how my beer is going to come out? thanks for your help guys, continued insight is definitely appreciated!!!

__________________
Bisco_Ben is offline
 
Reply With Quote Quick reply to this message
Old 02-13-2013, 09:21 PM   #9
Bisco_Ben
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Glen Cove, NY
Posts: 326
Liked 10 Times on 10 Posts
Likes Given: 50

Default

@brettg, according to what i just read, you are thinking backwards. I am over efficient so should boil less? According to this equation that is quoted below, instead of a 1.092 OG at 5.5 gal, I will wind up with 1.098 at 5.5 gallons. Here is what I found and read:

"Then using your gravity, volume and expected boil off you'll be able to calculate your expected SG. For instance if your preboil gravity is 1.050 and your volume is 7 gallons you have 350 gravity units[(GU)= 50x7) if you expect to boil down to 5.5 gallons you can devide the GU into the 5.5 and get your expected SG (350/5.5=63) for a starting gravity of 1.063 if you boil down to 5.5 gallons."

__________________
Bisco_Ben is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
1st running gravity vs pre boil gravity vs post boil gravity TTB All Grain & Partial Mash Brewing 3 12-07-2012 06:55 AM
Hitting Pre-boil gravity, missing Post-boil gravity jbags5 Beginners Beer Brewing Forum 20 09-29-2012 01:41 PM
Just started a boil, need some advice asap! dandog2500 Beginners Beer Brewing Forum 81 02-18-2012 05:56 PM
how can I determine post-boil gravity from a pre-boil gravity reading? snailsongs General Techniques 5 03-05-2009 03:42 PM
Post boil gravity doesn't match post boil gravity Kaiser All Grain & Partial Mash Brewing 17 02-10-2009 03:07 PM