Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Partial mash adjunct question???

Reply
 
LinkBack Thread Tools
Old 08-16-2009, 06:29 PM   #1
artguy
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Massachusetts
Posts: 189
Liked 2 Times on 2 Posts

Default Partial mash adjunct question???

Hi all,

Having done a few extract brews so far, I'm looking to do my first partial mash with something close to the 3-gallon stout recipe copied below, but I have a question about using adjunct grains in the mini-mash (flaked barley in this case). The article that I learned about partial mashing from (using the BIAB in 2-gallon cooler method) stated that in a mash of four pounds of grain, the amount of adjunct grain that could be used was limited to 13 oz. if using 2-row or 19 oz. if using 6-row, and that after that there would not be enough enzymatic activity to convert the adjuncts. These guidelines were given for a 5-gallon batch, so my question for those of you in the know:

Do I need to scale back the 13 oz. limit on adjuncts based on my smaller batch size (3.25 gallons of wort vs. 5 in the guidelines), or is it the size of the partial mash that matters? Ideally I would increase the amount of flaked barley to 12 oz or more (and cut back the 2-row), but I'm trying to figure out my upper limit with a partial mash.

Thanks for any advice, and here's the draft of the recipe for reference:

Stout partial mash 3 gallon yield
Style: 13A-Stout-Dry Stout

Wort Volume Before Boil: 4.25 US gals
Wort Volume After Boil: 3.25 US gals
Volume Transferred: 3.25 US gals
Water Added: 0.00 US gals
Volume At Pitching: 3.25 US gals
Final Batch Volume: 3.00 US gals
Expected Pre-Boil Gravity: 1.020 SG
Expected OG: 1.044 SG
Expected FG: 1.010 SG
Expected ABV: 4.5 %
Expected ABW: 3.6 %
Expected IBU (using Tinseth): 34.6
Expected Color: 38.7 SRM
Apparent Attenuation: 77.1 %
Mash Efficiency: 60.0 %
Boil Duration: 60.0 mins
Fermentation Temperature: 68 degF

Fermentables
UK Pale Ale (2-row) Malt 3.00 lb (54.5 %) In Mash/Steeped
UK Flaked Barley 0.34 lb (6.2 %) In Mash/Steeped
UK Roasted Barley 0.33 lb (6.0 %) In Mash/Steeped
UK Chocolate Malt 0.33 lb (6.0 %) In Mash/Steeped
Extract - Light Liquid Malt Extract 1.50 lb (27.3 %) Start Of Boil

Hops: UK Fuggle (4.5 % alpha) 1.25 oz Bagged Pellet Hops used All Of Boil

Yeast: Nottingham

__________________
artguy is offline
 
Reply With Quote Quick reply to this message
Old 08-16-2009, 09:52 PM   #2
david_42
Feedback Score: 0 reviews
 
david_42's Avatar
Recipes 
 
Join Date: Oct 2005
Location: Willamina & Oak Grove, Oregon, USA
Posts: 25,651
Liked 133 Times on 126 Posts

Default

My own guideline is as much 2-row as adjuncts. This has always worked for my partial mashes. You have 3 times as much 2-row as adjuncts. I'd say you are fine with that recipe.

__________________

Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

david_42 is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
What is the American adjunct mash for? ohad All Grain & Partial Mash Brewing 15 08-29-2009 10:35 AM
Partial Mash question pgenius Beginners Beer Brewing Forum 7 04-14-2009 08:24 PM
Partial Mash Question tbone Brewing Software 4 11-07-2007 04:55 PM
Fix the mix...Adjunct accidently mixed with main mash. Red Clay All Grain & Partial Mash Brewing 5 09-03-2007 12:07 AM
Partial Mash and the 2 Gal MLT question Uncle Argyle All Grain & Partial Mash Brewing 3 03-24-2007 03:39 PM