Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Only 1g recovered from 4g strike for 12lb
Reply
 
LinkBack Thread Tools
Old 04-23-2011, 09:21 PM   #1
asterix404
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2009
Location: Natick, MA
Posts: 541
Liked 8 Times on 8 Posts
Likes Given: 3

Default Only 1g recovered from 4g strike for 12lb

So this is about my 20th all grain batch and still I am surprised by interesting surprises. I mashed up the following:

6lb rye malt
3lb light munich
2lb light wheat
1lb CaraHells (essentially crystal 10)
3/4 lb (about 3qt rice hulls)

So in total 12g. I crushed the grain medium to coarse to prevent a stuck sparge. I used 4g so I got the 1.25qt per pound ratio and I only recovered about 1g of strike water. To compensate for this I am using 5g sparge water and I almost filled my 48qt colman cooler which leads me to believe that a lot of water was absorbed into the grain... much more than I expected.

Typically I get at least 2g normally, 2.5g from my strike and almost all of my sparge. Any idea what happened? Did I grind the grain much finer than I expected I did and it just took up all the water?

For reference I ground the barley at .9mm, the wheat at .75mm, and the rye at .70mm. This is actually the first time I have been able to measure the gap in the grain as I just bought a gap measurer today, that and the ruler are my 2 most prized (and cheapest) investments in the switch to all grain.

thanks!

__________________
asterix404 is offline
 
Reply With Quote Quick reply to this message
Old 04-24-2011, 12:25 AM   #2
Hammy71
Senior Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Hammy71's Avatar
Recipes 
 
Join Date: Sep 2008
Location: , Maryland, The Tax Me State
Posts: 5,601
Liked 413 Times on 317 Posts
Likes Given: 619

Default

Did you presoak your hulls? That's a lot of rice hulls. They will suck up a lot of you runnings. I always pre-soak them in hot water before adding them first to my MLT.

__________________
Hammy71 is offline
 
Reply With Quote Quick reply to this message
Old 04-24-2011, 01:53 AM   #3
asterix404
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2009
Location: Natick, MA
Posts: 541
Liked 8 Times on 8 Posts
Likes Given: 3

Default

OH! Okay, no I didn't, thanks for the advice. I still got about 70% efficiency and with the 5g sparge it helped get a lot of the sugar. Next time I presoak!

Thanks again!

__________________
asterix404 is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Overshot Mash Temp then recovered - Whats going to happen? electronjunkie All Grain & Partial Mash Brewing 2 12-18-2010 02:20 PM
strike temp q's eljib All Grain & Partial Mash Brewing 7 10-18-2009 06:33 AM
strike temp docmoran All Grain & Partial Mash Brewing 1 03-09-2009 03:50 AM
Strike Water hopsalot All Grain & Partial Mash Brewing 8 05-18-2008 05:39 PM
Keg MLT Strike Temp? Lil' Sparky All Grain & Partial Mash Brewing 7 02-02-2007 01:42 PM