Spike Brewing 12.5 Conical Fermenter Giveaway!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Measuring you mash temps?

Reply
 
LinkBack Thread Tools
Old 11-22-2006, 09:28 AM   #1
boo boo
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2005
Location: Hearts's Delight, Newfoundland
Posts: 4,171
Liked 30 Times on 26 Posts
Likes Given: 4

Default Measuring you mash temps?

I know a man with two watches has two different times so...I use three thermometers when mashing to guage my mash temps, but tend to trust only the alcohol filled glass thermometer for my mash temps. I would like to know of a source for a reliable accurate thermometer that can be had for a reasonable price.

The three I have are the bi-metal one that came with my turkey frier, a cheap ditigal one and my floating glass alcohol filled one. I could try to calibrate mine but want to be sure to have something to compare it too.

Thanks.

__________________

How do you BBQ an elephant....first you get your elephant....

boo boo is offline
 
Reply With Quote Quick reply to this message
Old 11-22-2006, 01:06 PM   #2
zoebisch01
Feedback Score: 0 reviews
 
zoebisch01's Avatar
Recipes 
 
Join Date: Nov 2006
Location: Central PA
Posts: 5,198
Liked 7 Times on 7 Posts

Default

I know what you mean. I have three thermometers (two dials and a digital), and did discover that one of them (a small dial accurite) was screwed up. It all depends on what you are willing to pay for one. As far as calibration, it is a little bit of a pain but you can boil a small pot of water and then stick the probe into the (pretty much) 212 F water. It is the only reasonable means aside from buying another thermometer. But what I found out with my screwed up one was that it was bad even after calibrating it. It would cool back down to room temperature and then it was off by quite a few degrees when compared with the other thermometers. Your best bet, imho is a decent digital one because the speed in which they come to measurement temp seems to be much faster than a dial. I bought my 'Big Daddy' (lol) thermometer from homebrewit.com (my local shop doesn't carry equipment) and I couldn't find a long stemmed one anywhere. Hope that helps!

[edit] One thing I forgot, there are adjustments for altitude as well here is a handy dandy table : http://www.hi-tm.com/Documents/Calib-boil.html#tables [/edit]

__________________

Last edited by zoebisch01; 11-22-2006 at 02:25 PM.
zoebisch01 is offline
 
Reply With Quote Quick reply to this message
Old 11-22-2006, 01:40 PM   #3
david_42
Feedback Score: 0 reviews
 
david_42's Avatar
Recipes 
 
Join Date: Oct 2005
Location: Willamina & Oak Grove, Oregon, USA
Posts: 25,651
Liked 133 Times on 126 Posts

Default

Probably the most useful way to calibrate a thermometer for mashing is to place a mug with some cheap vodka in a a pot with some water in it. The thermometer goes in the mug with the vodka. When the temperature hits 172F, the alcohol will start boiling off and the temperature won't rise any further until almost all of the alcohol is gone. The water bath helps prevent hot spots that would throw the measurement off.

__________________

Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

david_42 is offline
 
Reply With Quote Quick reply to this message
Old 11-22-2006, 03:33 PM   #4
boo boo
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2005
Location: Hearts's Delight, Newfoundland
Posts: 4,171
Liked 30 Times on 26 Posts
Likes Given: 4

Default

I have been playing with the notion of calibrating my existing thermo's but what I really want is a reliable thermostat I can compare the temps to.

Thanks for the replys

__________________

How do you BBQ an elephant....first you get your elephant....

boo boo is offline
 
Reply With Quote Quick reply to this message
Old 11-22-2006, 04:49 PM   #5
Desert_Sky
Feedback Score: 0 reviews
 
Desert_Sky's Avatar
Recipes 
 
Join Date: Mar 2006
Location: Sierra Vista, AZ
Posts: 4,090
Liked 35 Times on 32 Posts
Likes Given: 2

Default

Ive been using a glass labratory thermometer. It was a couple bucks more, and fragile as hell, but from what I hear, its what everyone uses to cal thier digitals

__________________
Desert Sky Brewing Co.
Sierra Vista, AZ
Desert_Sky is offline
 
Reply With Quote Quick reply to this message
Old 11-22-2006, 08:53 PM   #6
boo boo
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2005
Location: Hearts's Delight, Newfoundland
Posts: 4,171
Liked 30 Times on 26 Posts
Likes Given: 4

Default

And what I'll end up buying, also.

__________________

How do you BBQ an elephant....first you get your elephant....

boo boo is offline
 
Reply With Quote Quick reply to this message
Old 11-25-2006, 02:39 PM   #7
perry
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2006
Posts: 218
Default

I've got two of those foot-long dial thermometers with the aluminum shaft from Williams Brewing. They work great; they are fast-reading and easy to calibrate in a glass of ice water- and you can easily hold it in the mash while stirring. They do tend to "spike" occasionally but I guess I just compensate and got used to it...

jp

__________________
perry is offline
 
Reply With Quote Quick reply to this message
Old 11-25-2006, 03:00 PM   #8
Baron von BeeGee
Beer Bully
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Baron von BeeGee's Avatar
Recipes 
 
Join Date: Jul 2005
Location: Barony of Fuquay-Varina, NC
Posts: 5,419
Liked 10 Times on 10 Posts

Default

I've calibrated my digital thermometer (the $25 with a probe type) in an ice bath and boiling water and found it to be exactly accurate at 32F/212F, so I have faith in it.

Aside: I've also noted that in an unstirred mash it's impossible to get an accurate reading anyways and I tend to rely on my strike temp calculation and occasional stirring of my single-infusion mashes (every 20m for just a few seconds). Yesterday I mashed in at 151F (my target) with the probe in the center of the mash. 20m later the probe was reading 158F! I moved it to the edge and got 150F. I stirred and got back to a uniform 151F.

__________________
Baron von BeeGee is offline
 
Reply With Quote Quick reply to this message
Old 11-25-2006, 03:07 PM   #9
natehilde
Feedback Score: 0 reviews
 
natehilde's Avatar
Recipes 
 
Join Date: Nov 2006
Location: Colorado
Posts: 100
Liked 5 Times on 1 Posts

Default

As far as analog thermometers go, the "liquid-in-glass" expansion thermometer is the most accurate. It is sealed at both ends and thus does not require any adjustment in calibration for elevation pressure differences. The problem with it is the lag time between indication of temperature changes. I like to use the bi-metallic expansion thermometers because of their quick indications. The problem with calibration of this type of thermometer is that you have to calibrate it in the temperature range that you will be using it in. This is very hard to do, unless you have some sort of prime standard for calibration. The next best thing is to calibrate the thermometer at both ends of the scale. Ice water is 32F and water boils at 212F (at sea level). You can use this information to calibrate the thermometer at both ends of the scale. I have never heard of calibrating with alcohol, but that seems to be a reasonable approach.

Just for some background on this information. I am a nuclear power instructor. I teach students about all different types of temperature and pressure indicating devices and calibration of these instruments. IMHO, if it is good enough for neutrons, its good enough for beer.


Just my .02

__________________
"A Chief Petty Officer does not drink. But if he drinks, he will not get drunk. And if he gets drunk he will not stumble. And if he stumbles he will not fall. But if he falls, he will fall with his service stripes down, so that passers by think him to be a Junior Officer."
natehilde is offline
 
Reply With Quote Quick reply to this message
Old 11-26-2006, 09:59 PM   #10
boo boo
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2005
Location: Hearts's Delight, Newfoundland
Posts: 4,171
Liked 30 Times on 26 Posts
Likes Given: 4

Default

Yeah natehilde, I guess it would be.

I have a lab thermo ordered. I like to be as precise as I can when doing any type of measureing.

thanks everyone.

__________________

How do you BBQ an elephant....first you get your elephant....

boo boo is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
measuring mash temp? Jersh All Grain & Partial Mash Brewing 14 10-21-2009 01:52 AM
Mash temps Yambor44 Equipment/Sanitation 9 04-21-2009 08:59 PM
Measuring efficiency for partial mash? CallMeZoot All Grain & Partial Mash Brewing 5 02-01-2008 11:59 PM
measuring mash temps... Tophe Equipment/Sanitation 2 03-20-2007 06:49 AM
Measuring Mash Temps Brew-boy All Grain & Partial Mash Brewing 9 12-26-2006 05:10 PM