Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Mash Stirrer/Mixer Question.
Reply
 
LinkBack Thread Tools
Old 03-13-2009, 02:58 AM   #1
punk_rockin2001
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Charleston, IL
Posts: 150
Liked 3 Times on 2 Posts
Likes Given: 1

Default Mash Stirrer/Mixer Question.

I'm considering putting something to stir my mash onto the mash tun, but before I start something like that I was wondering if it really helps? I currently get 70-75% efficiency, and 86% was the highest I've ever gotten. Will adding something like this help to improve efficiency, or does it have some other purpose? Does anyone recommend doing this, or if it aint broke don't fix it?

__________________
punk_rockin2001 is offline
 
Reply With Quote Quick reply to this message
Old 03-13-2009, 04:46 AM   #2
BrianP
Feedback Score: 0 reviews
 
BrianP's Avatar
Recipes 
 
Join Date: Sep 2007
Location: Dexter, MI, Michigan
Posts: 1,159
Liked 2 Times on 2 Posts

Default

Opening the lid once and giving it a stir seems to work fine for me.

Plus, 70-75% efficiency is good, and having a high efficiency isn't the end-all, be-all of brewing. What's better is a process that is repeatable at a given efficiency so your recipes will hit their numbers consistently when you base them at that efficiency.

If it were me, I wouldn't invest the time.

__________________

Cheers,

BP

-------------------------------
Fermenter 1: Best bitter (1)
Fermenter 2: Best bitter (2)
Fermenter 3: APA
Fermenter 4: APA

BrianP is offline
 
Reply With Quote Quick reply to this message
Old 03-13-2009, 05:23 AM   #3
Kaiser
Feedback Score: 0 reviews
 
Kaiser's Avatar
Recipes 
 
Join Date: Nov 2005
Location: Pepperell, MA
Posts: 3,904
Liked 115 Times on 71 Posts
Likes Given: 4

Default

Before you make the investment into a mash stirring mechanism, try to find out if stirring the mash really helps your efficiency and if you could improve it by optimizing other mash parameters like crush, pH, water/grist ratio, time, etc.

Kai

Kaiser is offline
 
Reply With Quote Quick reply to this message
Old 03-13-2009, 05:30 AM   #4
punk_rockin2001
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Charleston, IL
Posts: 150
Liked 3 Times on 2 Posts
Likes Given: 1

Default

I've gotten my crush to where I think its really good, and I have no clue about my ph. Well now I suppose my question is why do people use a stirring device in their mash? I know there are people on here that use them!

__________________
punk_rockin2001 is offline
 
Reply With Quote Quick reply to this message
Old 03-13-2009, 05:45 AM   #5
ClaudiusB
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2007
Location: El Paso, Texas
Posts: 1,290
Liked 64 Times on 54 Posts
Likes Given: 126

Default

Quote:
I know there are people on here that use them!
Correct, I am one of them.
My Mash/Lauter tuns are heated, I do step mashing which requires stirring.
The larger mash tun stirrer is also used to remove the spent grain.

If you use a cooler I don't see the need for a stirrer unless you like DIY projects.
Follow Kaiser's advice first and get your parameters correct.


Cheers,
ClaudiusB
ClaudiusB is offline
 
Reply With Quote Quick reply to this message
Old 03-13-2009, 04:26 PM   #6
jdieter
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Posts: 56
Liked 1 Times on 1 Posts
Likes Given: 1

Default

I switched from a herms to a stirrer and direct fired tun to get quicker step times and better temp control. Mash in a sanke with a screen and braid under the screen, stirrer runs at 20 rpm during mash, then shut it down during fly sparge. Got an efficiency bump from mid 70's to mid/hi 80's.

__________________
jdieter is offline
 
Reply With Quote Quick reply to this message
Old 03-13-2009, 06:49 PM   #7
kmlavoy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2007
Location: Chicago
Posts: 186
Default

Whatever your setup- the reason to stir is to maintain your mash temps. Once you get a sort of baseline efficiency for your system, that's really all you're looking to hit. Keep in mind that you don't really want 100% efficiency, as that is based off of lab conditions.

The stirring, again, is simply to maintain mash temps. If you design a beer that is best mashed at 154 degrees, then you really want to stay as close to that number as possible, as you'll be making a very different beer if you stray down to, say, 148 degrees.

In the end, it's to help you make the beer you planned on making.

__________________

lavoyboysbrewing.blogspot.com

kmlavoy is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mash Stirrer? Orpheus Brew Stands 13 02-26-2011 09:06 PM
ATTN Kaiser, my Decoction mash mixer.... squiggy All Grain & Partial Mash Brewing 7 07-05-2009 05:55 PM
power mash stirrer chris1979 Kettles, Mash Tuns, & Hot Liquor Tanks 1 04-29-2009 04:41 PM
Mash Mixer that heats! WortMonger Brew Stands 30 05-02-2007 11:28 PM
Brewpastor-sized mash mixer! david_42 Equipment/Sanitation 6 01-14-2007 08:56 PM



Newest Threads

LATEST SPONSOR DEALS