New Giveaway - Wort Monster Conical Fermenter!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Grain crushing question




Reply
 
LinkBack Thread Tools Display Modes
Old 01-24-2012, 06:29 AM   #11
ShinyBuddha
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: San Diego, California
Posts: 346
Liked 17 Times on 17 Posts
Likes Given: 5

Default

I love these photos showing a good crush. Just like goldilocks, not too much, not too little.

~SB



__________________
ShinyBuddha is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2012, 07:47 AM   #12
rockgardenlove
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: Portland, OR
Posts: 65
Liked 1 Times on 1 Posts
Likes Given: 1

Default

Quote:
Originally Posted by borden
This may be a silly question, but would the moisture from conditioning the grain have any effect on a cast iron Corona style mill? I know those things are prone to rust if you're not careful. I assume the amount of water is minimal enough to not really create too much residual moisture, but if anyone has experience with this, feel free to chime in.
For stuff like this start warming the oven to a low temp, then turn off at 120 to 150 degrees. Throw stuff in there to dry and it won't rust.


__________________
rockgardenlove is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2012, 01:36 PM   #13
whitehause
Feedback Score: 1 reviews
Recipes 
 
Join Date: Oct 2011
Location: Fleetwood, Pa
Posts: 1,105
Liked 137 Times on 102 Posts
Likes Given: 28

Default

Quote:
Originally Posted by rockgardenlove View Post
For stuff like this start warming the oven to a low temp, then turn off at 120 to 150 degrees. Throw stuff in there to dry and it won't rust.
+1 to this
__________________
Screw it, Lets brew it

Primary 1- BM's Cream of three crops.
Primary 2- Paleface Scalper
Primary 3- Monks Reward (Kreuzberg)
Kegged - Honey Badger, Heady topper clone 1, Indian Paleface Scalper
Bottled- Skeptical Dog winter Lager, Hell's Belgian, Old Dutch Hiefer Hefe,Aphlewein, Chocolate Thunder porter, Jacked up lantern
whitehause is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2012, 03:10 PM   #14
adamreef
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2011
Location: Cranberry Township, PA
Posts: 120
Liked 7 Times on 7 Posts

Default

Quote:
Originally Posted by Nuggethead

I was'nt so lucky. My LHBS pre-crushes 50lbs at a time of most of their stock and keeps it in plastic trash cans. They don't even like to open bags to sell small quanities ( 10 lbs or less ) of uncrushed grains. I generally have to purchase my 2-row in 50 lb bags and then order uncrushed specialty malts from online shops.
This is terrible practice. Aside from staling, the fines will settle to the bottom and husks will rise to the top as the container is handled.

Adam
__________________
adamreef is offline
 
Reply With Quote Quick reply to this message
Old 01-29-2012, 06:08 PM   #15
Nuggethead
Senior Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Nuggethead's Avatar
Recipes 
 
Join Date: Apr 2010
Location: Reno, Nv.
Posts: 458
Liked 30 Times on 23 Posts
Likes Given: 13

Default

Quote:
Originally Posted by adamreef View Post
This is terrible practice. Aside from staling, the fines will settle to the bottom and husks will rise to the top as the container is handled.

Adam
Exactly !!, It made repeatability in recipes very difficult. Efficiencies differed from 10lbs from the top vs. the same amount from the bottom of the container. New brewers were complaining of stuck sparges when it normally wouldn't have been a problem. It was actually an employee of the shop that took me aside and told me to start crushing my own if I wanted to brew better beers.
__________________
Nuggethead is offline
 
Reply With Quote Quick reply to this message
Old 01-30-2012, 03:52 AM   #16
D-MOTITAN
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
D-MOTITAN's Avatar
Recipes 
 
Join Date: Jan 2011
Location: East County, Nor Cal
Posts: 196
Liked 7 Times on 6 Posts
Likes Given: 9

Default

Quote:
Originally Posted by ShinyBuddha View Post
I love these photos showing a good crush. Just like goldilocks, not too much, not too little.

~SB
+1...great pics. Since i started milling my own I have been getting 80% efficiency.
__________________

unta gleeben glouten globen.......Def Leopard

D-MOTITAN is offline
 
Reply With Quote Quick reply to this message
Old 07-15-2012, 09:41 AM   #17
Quaker
Beer Missionary
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Quaker's Avatar
Recipes 
 
Join Date: Sep 2011
Location: Burlington, WI
Posts: 628
Liked 43 Times on 28 Posts
Likes Given: 10

Default

A little dated thread, but seemed a decent place to share these pictures. Today I was brewing a porter and decided to try steeping the specialty grains (except some flaked oats) separately. In my haste, I forgot to crush them first. So I drained them with a strainer, then milled them. I had tried conditioning my grain with spray bottle once a couple years ago and wasn't happy with the mess it left in the mill. So I milled my base grain first (100% pilsner) figuring I may make a mess and to keep the dark malts completely separate. Then I milled the wet grain. You can clearly see the husks are nearly full intact on the specialty grains. The grains are cracked though. There were about 3 pounds of specialty grains, steeped 2 hours first in 3L of water at an initial temp of 132F. Then drained, that wort set aside and another 2.5L of wort from my main mash added for another rest starting at 140F for another hour and a half. The resultant gravity was very hazy 16 Brix in the refractometer. The pre-boil gravity of the main mash was 11.7 Brix. So it seem that there was still plenty of a crush to enable dissolving of the sugars in the crystal malts. I did have some gummy paste in the mill after finished, but easy enough to clean up. I might try this on a future batch for full mash.







__________________

My father says, "hobbies are supposed to cost money".

Quaker is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Grain Crushing NorsemenRugby58 All Grain & Partial Mash Brewing 4 08-16-2010 11:57 AM
Question about Crushing your Grain-Bill... Tanagra All Grain & Partial Mash Brewing 1 04-06-2010 10:36 PM
What would you do?? Grain Crushing question.. jakecpunut All Grain & Partial Mash Brewing 7 01-03-2010 02:29 PM
Grain Crushing Seeves1982 All Grain & Partial Mash Brewing 20 09-14-2009 07:35 AM
Crushing Grain McCall St. Brewer All Grain & Partial Mash Brewing 10 01-18-2006 05:19 PM