Fly sparge temperature question
I was wondering if the fly sparge temperatures I see around (168 - 170 F) apply to the temperature of the sparge water entering the tun or the temperature you are trying to maintain the mash at?
My sparge water is 170f. to 180f. and after sparging for 45 mins. with 10gals. of this water, my mash bed temp. still only rises to about 160f.
It doesn't seem to be a problem for me as my efficiency is around 80%-85%.
It's the temp to maintain the mash at...which often means that your sparge water should be a little hotter...how much hotter depends on your set-up.
If the grain bed/water exceeds 170o F by too much then you can extract harsh/astringent tannins. If the grain bed/water isn't up near that temp then you can leave sugars (or even starches if not fully converted) in the grain bed.
You don't denature all the enzymes when you mash-out @ 170o F. Alpha-amylase doesn't denature until something like 176o F...there is still the potential for some last second conversion to occur in the lauter tun...even @ 170o F. Not that you want to depend on that for conversion...you don't...but it's a little extra benefit of it.
FWIW, I use the ole technology zapap lauter tun and I have to heat my sparge water to 180o to 185o F (some heat is lost before it ever gets to the lauter tun since I'm just ladling it with a saucepot).
In my system I heat my sparge tank to 185. Since the water is moving so slowly through my silicon hoses, it cools considerably before hitting the top of the grain in the MLT. I generally start to raise the temps the last 15 minutes of the mash so I might hit 158 - 160 and it doesn't move much from there the duration of my sparge.
|All times are GMT. The time now is 04:15 AM.|
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.