Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > First Crush with Monster Mill
Reply
 
LinkBack Thread Tools
Old 05-11-2013, 01:31 AM   #21
BlackFurnaceBrewing
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2013
Posts: 28
Liked 3 Times on 3 Posts
Likes Given: 1

Default

So, am I the only one that tightens the MM2 up to 0.024"?

__________________

Primary: Bear's Mountain IPA
Secondary: Chocolate Raspberry Port
Bottled: General Stark ESB, Christine's 1/4 Mile Wheat, 82nd Airborne Amber, Sweet Home Bourbon Ale
On Deck: Double Clutch IPA, Breckenridge Ale, Black Nitrous Whiskey Stout

BlackFurnaceBrewing is offline
 
Reply With Quote Quick reply to this message
Old 05-11-2013, 01:45 AM   #22
chays99
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Heath, Tx
Posts: 71
Liked 1 Times on 1 Posts

Default

Thanks for the feedback. I will tighten down this weekend and post again.

I've been pretty frustrated trying to get it right. I got the mill for Christmas and haven't been able to brew until recently due to complications from a surgery that screwed up my ability to do any lifting. I'm eager as hell to get this mill dialed in and brew again!

__________________
chays99 is offline
 
Reply With Quote Quick reply to this message
Old 05-11-2013, 11:26 AM   #23
TANSTAAFB
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2010
Location: San Luis Valley, CO
Posts: 1,761
Liked 113 Times on 91 Posts
Likes Given: 12

Default

I had back surgery a few years ago and brew days used to be an exercise in cognitive dissonance ...love to brew but could barely walk by the time I got everything cleaned up. I finally broke down and bought a pump. I could not be happier now that all that heavy water and wort gets moved without me picking it up! And the mill will be a godsend once you get it dialed in.

__________________
Quote:
Originally Posted by Mirilis View Post
"I cant handle that buddy.. it tastes like Moose Piss", (IPA) - side note.. ive never had moose piss, but im sure it doesnt taste like IPA or I would have a moose.
Bottled: Grizzly Saison, Grizzly Brett, Session Pale, Colorado Cream Ale, Cranberry Apfelwein
Primary: -37* Blue Balls Baltic Porter, Bad Dog Brown, Bohemian Pilsner
Secondary: Rarely!!!
Future: Cognitive Dissonance Cascadian Dark Ale
TANSTAAFB is offline
 
Reply With Quote Quick reply to this message
Old 05-13-2013, 12:25 AM   #24
chays99
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Heath, Tx
Posts: 71
Liked 1 Times on 1 Posts

Default

I appreciate all of the feedback fellas. Here we go for the third time.

.035 with the thumbscrews tightened down with pliers.

image-3550676871.jpg   image-424533995.jpg   image-605911489.jpg  
__________________
chays99 is offline
 
Reply With Quote Quick reply to this message
Old 05-13-2013, 12:50 AM   #25
chays99
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Heath, Tx
Posts: 71
Liked 1 Times on 1 Posts

Default

Quote:
Be careful removing the thumbscrews and replacing with bolts - I had a problem where the ends of the thumbscrews had deformed against the adjustment knobs, so that when I removed them they trashed the threads on the way out. If I were buying a MM today, I wouldn't even use the thumb screws. Go out and get the hex bolts so that you can start with a good screw that never has to be fully removed once you start using it, since I think the ends of the screws are always going to get deformed against the hardened knob
I noticed that one of the thumbscrews backed out very difficultly today. Sounds like I might have the same problem. How did you deal with it?

Thanks.
__________________
chays99 is offline
 
Reply With Quote Quick reply to this message
Old 05-13-2013, 02:05 AM   #26
jammin
HBT_LIFETIMESUPPORTER.png
Feedback Score: 2 reviews
 
jammin's Avatar
Recipes 
 
Join Date: Jun 2011
Location: Meridian, ID
Posts: 1,253
Liked 192 Times on 152 Posts
Likes Given: 129

Default

Crush is looking muuuch better, sir!

__________________
jammin is offline
 
Reply With Quote Quick reply to this message
Old 05-13-2013, 12:01 PM   #27
Accidic
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Accidic's Avatar
Recipes 
 
Join Date: Mar 2010
Location: Millbrook, Alabama
Posts: 1,432
Liked 81 Times on 72 Posts
Likes Given: 66

Default

I thought the thumbscrews came tapered on the ends. Maybe I'm failing at visualizing but how do they burr the threads?

__________________
Accidic is offline
 
Reply With Quote Quick reply to this message
Old 05-13-2013, 08:01 PM   #28
MNDan
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Minnetonka, MN
Posts: 345
Liked 15 Times on 11 Posts
Likes Given: 8

Default

Quote:
Originally Posted by chays99 View Post
I noticed that one of the thumbscrews backed out very difficultly today. Sounds like I might have the same problem. How did you deal with it?

Thanks.
Get in touch with them. And I'd recommend not backing the screws all the way out if you don't have to - having a few bad threads at the end isn't a big deal - it's when I backed them all the way out again that I had problems.
__________________
MNDan is offline
 
Reply With Quote Quick reply to this message
Old 05-13-2013, 11:45 PM   #29
m00se
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2008
Location: Waltham, MA
Posts: 111
Liked 3 Times on 3 Posts
Likes Given: 25

Default

I set my MM2 2.0 to .035 and couldn't seem to get any of the grains to fall through. The roller just spun while the grain sat there. Is there any tricks to get the gap down that low .035 and have the grain crush? Conditioning?

__________________
m00se is offline
 
Reply With Quote Quick reply to this message
Old 05-13-2013, 11:51 PM   #30
gab
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2012
Posts: 22
Liked 9 Times on 7 Posts

Default

Quote:
Originally Posted by m00se
I set my MM2 2.0 to .035 and couldn't seem to get any of the grains to fall through. The roller just spun while the grain sat there. Is there any tricks to get the gap down that low .035 and have the grain crush? Conditioning?
Any chance your drill is on reverse (if you are using one)?
__________________
gab is offline
WileECoyote Likes This 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
monster mill vs crankenstein vs rebel mill krenshaw Equipment/Sanitation 31 01-04-2014 09:48 PM
Monster Mill 2 Crush? Esmitee All Grain & Partial Mash Brewing 30 04-03-2013 06:59 PM
WTB Grain mill: barley crusher, monster mill, etc TheWulf Want to Buy 0 01-16-2013 07:36 PM
WTB (Want To Buy) - Monster Mill ArcLight For Sale 1 09-18-2012 12:16 PM
Monster Mill Grain Mill Stand Build Shay Equipment/Sanitation 12 12-24-2009 07:35 PM