First All Grain. MLT problems. - Page 2

		Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing
First All Grain. MLT problems.

Blogs

FAQ

Today's Posts

Mark Forums Read

Page 2 of 2

LinkBack

Thread Tools

Display Modes

07-30-2009, 11:19 PM

#11

BargainFittings

Vendor

Vendor Ads

Recipes

Join Date: Nov 2008

Location: Allen TX

Posts: 1,682

I also recommend opening it slow to let the grain bed set and then slowly opening it to full bore.

Check the braid to see if it has some spaces you see through. If you can't see any holes then the mesh is too tight.

__________________
Wayne

Weldless kettle and keg fittings - Always Flat $5.00 shipping to USA 50 States!

BargainFittings.com

Page 2 of 2

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First all-grain...problems, problems, problems.	Q2XL	All Grain & Partial Mash Brewing	26	11-20-2009 09:41 PM
First solo all grain batch... problems	cimirie	All Grain & Partial Mash Brewing	19	04-11-2009 07:49 PM
Regulator problems? Or Judo problems?	Judochop	Bottling/Kegging	6	10-21-2008 05:15 PM
3rd all-grain...problems with batch sparge	Evan	All Grain & Partial Mash Brewing	8	08-04-2008 02:03 PM
All Grain #2 - Problems...	ColoradoXJ13	All Grain & Partial Mash Brewing	4	03-19-2007 11:29 PM

« Is greater than 100% efficiency possible? | Beer needs more maltiness. Treat water? »