Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > first AG update 8 days what next?

Reply
 
LinkBack Thread Tools
Old 04-26-2007, 03:31 AM   #1
poetic_entropy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2006
Posts: 49
Default first AG update 8 days what next?

IT went like this.......

12 pale, 1 # cr 20. and hops........

Mashed in cooler ( little thin) at 153. After 70 min it was 147 (damn wind)

boil hop, boil hop, boil hop etc etc.....60 min later

cooled to 90 in about 15 min


put in fermenter 1.071 gravity

pitched about 8 hours later in the morning with Safale us-56

fermented @ 60-63 for 8 days now 1.011

very very hazy, did a crappy job of filtering trub

Very strong flavor.

How do I figure effeciency for next time... seemed a little too good.

Where do I go from here??? seems a bit dry.

__________________
poetic_entropy is offline
 
Reply With Quote Quick reply to this message
Old 04-26-2007, 03:51 AM   #2
mew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2006
Posts: 853
Liked 8 Times on 4 Posts

Default

Did you chill and then wait eight hours or just let it sit to cool? If I were you I'd get a chiller. I use this http://hbd.org/recipator/ to calculate efficiencies.

__________________
Primary: Pilsner
Secondary: Empty
Keg 1: Dunkelweizen
Keg 2: Empty
mew is offline
 
Reply With Quote Quick reply to this message
Old 04-27-2007, 05:19 AM   #3
poetic_entropy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2006
Posts: 49
Default

I did use a imersion chiller. But here are my mainn questions

The final gravity seems a little low, I was expecting 15 or so, can I add something to bring it up.

Also I was expecting a low efficiency but seemed to get 82% This made it a little stiff for what I was looking for. I mashed a little longer to make up for an expected lousy efficiency is this what made my final gravity so low?


One final ?...... What is the best way to clear it up. I plan on racking it to a secondary tomorrow, is there any thing else I can do. I did a lousy job off keeping the hops and settlement out of the fermenter.

Thanks again everyone.

***side note, During the mash I stirred every 15-20 minutes and before sparging. I poured (easier to spell that vourlaf?) my first running back over the grain bed. Should I have just let it be and not stirred?

__________________

Last edited by poetic_entropy; 04-27-2007 at 05:33 AM.
poetic_entropy is offline
 
Reply With Quote Quick reply to this message
Old 04-27-2007, 05:32 AM   #4
Jaybird
Vendor
HBT_SPONSOR.png
HomeBrewTalk 2012 Vendor Giveaway Participate
Feedback Score: 1 reviews
 
Jaybird's Avatar
Recipes 
 
Join Date: Jul 2006
Location: Nor*Cal
Posts: 5,346
Liked 245 Times on 172 Posts
Likes Given: 86

Default

let it set in secondary for a few days at fermentation temp then start droping the temp about a degree a day.. Some things drop out of suspention at different temps. But all in all TIME is going to be your best friend here to clear it up.
JJ

__________________
Jaybird is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
hop update 3 brewyourown4life Hops Growing 4 08-28-2009 03:19 PM
Promash Update? Brewpastor Brewing Software 4 10-10-2008 12:38 AM
First AG Brew update mikeyc All Grain & Partial Mash Brewing 2 12-08-2007 03:43 AM
DUBBEL UPDATE: 3 days post-pitching... Evan! General Techniques 4 10-10-2006 02:51 PM
update on oaked IPA cweston Recipes/Ingredients 4 05-22-2006 11:19 PM



Newest Threads