Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > First AG Kolsch - whats next....
Reply
 
LinkBack Thread Tools
Old 11-23-2012, 11:10 PM   #1
OldDirty
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2012
Location: Peoples Socialist Republic of Chicago
Posts: 44
Liked 5 Times on 2 Posts
Likes Given: 4

Default First AG Kolsch - whats next....

Did my first BIAB AG batch 6 days ago and so far love the process! I decided to do a Kolsch because of the simplicity. I had fermentation start within 12 hours of pitching my yeast with full krausen within 36 hours. I pitched my yeast at 57* and it raised up to a steady 63* after 24 hours I'm now at day 6 in the primary, still with full krausen but very little if no bubbling in my blow off bucket. I decided take a gravity sample to check my progress. My gravity post boil was 1.044, my gravity now is 1.012. I'm pretty sure my fermentation is complete at this point. I will give it another 3 days and check my gravity again. The question is do I let it sit for another week in the primary or do I rack it now to a keg then lager for a few weeks?
The color of my sample is dark yellow with an orange hue. I'll post a pic of it shortly.

Here's the stats:
Batch Size 5.500 gal
Boil Size 6.5 gal
Boil Time 60 min

OG 1.044
FG 1.012
ABV 4.6%
Bitterness 24.9 IBU (Tinseth)

Fermentables
Total grain: 10 lb
Munich Malt - 10L Grain 1lb
Rahr - 2 Row Malt Grain 9 lb
DME .5 lb (used to raise my OG)

Hops
Hallertau 4.5% 1.0 oz Boil 60 min
Tettnang 4% 0.5 oz Boil 60 min
Tettnang 4% 0.5 oz Boil 15 min

Misc
Whirlfloc 15 min

Yeast
Wyeast2565 - Kolsch in 1L starter

__________________
OldDirty is offline
 
Reply With Quote Quick reply to this message
Old 11-23-2012, 11:15 PM   #2
OldDirty
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2012
Location: Peoples Socialist Republic of Chicago
Posts: 44
Liked 5 Times on 2 Posts
Likes Given: 4

Default

Sorry about the large pic...

__________________
OldDirty is offline
 
Reply With Quote Quick reply to this message
Old 11-23-2012, 11:22 PM   #3
RM-MN
HBT_SUPPORTER.png
Feedback Score: 1 reviews
Recipes 
 
Join Date: Nov 2010
Location: Solway, MN
Posts: 7,146
Liked 855 Times on 712 Posts
Likes Given: 319

Default

I'd leave it in the primary but put it in a warmer location. The yeast have eaten the sugars but there are more byproducts for the yeast to break down. From the picture it appears that the yeast are still active. Another 2 weeks would be good for it and then cool it.

__________________
RM-MN is offline
 
Reply With Quote Quick reply to this message
Old 11-23-2012, 11:32 PM   #4
EllisTX
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: Booger County, Texas
Posts: 871
Liked 48 Times on 41 Posts
Likes Given: 8

Default

Kolsch yeast will stay in suspension for weeks. Leave it alone for another week at a temperature closer to 70. You'll possibly have krausen even after cold crashing. Just rack from under the krausen. You have to be almost as patient with a kolsch as you do with a lager. Time is your friend with benefits

__________________

"La La La Lo Lo Lo Luuuke, Luuuke, I am your father, Lo Lo Lo Lu Lu Lu"- Chris Farley

EllisTX is offline
 
Reply With Quote Quick reply to this message
Old 11-24-2012, 12:39 AM   #5
OldDirty
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2012
Location: Peoples Socialist Republic of Chicago
Posts: 44
Liked 5 Times on 2 Posts
Likes Given: 4

Default

Thanks for the suggestions! I'll let it sit in the primary another 10-14 days then keg and lager.
I liked what I saw and smelled when I took my gravity sample. Definite yeast smell with a bit of beer sharpness to it. My sample taste was pretty good. Little mouth feel initially but crisp finish for a green beer. I figured with some time it would clean up and mature to make a proper beer. Frankly I'm not in a rush, I just want to start brewing properly and with consistency. If all goes well I'll use this Kolsch recipe as a base for other beers

__________________
OldDirty is offline
 
Reply With Quote Quick reply to this message
Old 11-24-2012, 03:35 AM   #6
TNGabe
Feedback Score: 17 reviews
Recipes 
 
Join Date: Aug 2012
Posts: 6,546
Liked 2203 Times on 1492 Posts
Likes Given: 2240

Default

I've only brewed two batches with 2565, but I wouldn't crank the heat. It'll keep chugging along just fine without it. I doubt it's done - I bet you'll finish out 1.008 or lower. I remember this yeast having krausen for weeks.

__________________

Why spend 5 minutes reading when you can just start another thread?

TNGabe is offline
 
Reply With Quote Quick reply to this message
Old 11-24-2012, 06:17 AM   #7
rossi46
Senior Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
rossi46's Avatar
Recipes 
 
Join Date: Jan 2011
Location: Pasco, WA
Posts: 731
Liked 48 Times on 38 Posts
Likes Given: 5

Default

I do a ton if Kolsch, 11 gal a month. I do 62 for the first 10 days then bump to 70 for 4 days. Transfer to kegs and lager for a month.

__________________
rossi46 is offline
 
Reply With Quote Quick reply to this message
Old 11-24-2012, 12:51 PM   #8
brussum
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2012
Location: Mount Vernon, Virginia
Posts: 167
Liked 7 Times on 6 Posts

Default

Is the 2565 Kolsch yeast usually a slow starter? I pitched mine into a recipe similar to the OP's and have waited about 16 hrs. The airlocks are still resting, but there's a thick foam in the buckets. The yeasties just don't seem to be vigorously creating gases yet. Normal? Seems like you usually see airlock activity within 12 hrs or so. The fermenting chamber is at 65F and OG was 1.048.

__________________
brussum is offline
 
Reply With Quote Quick reply to this message
Old 11-24-2012, 01:36 PM   #9
RM-MN
HBT_SUPPORTER.png
Feedback Score: 1 reviews
Recipes 
 
Join Date: Nov 2010
Location: Solway, MN
Posts: 7,146
Liked 855 Times on 712 Posts
Likes Given: 319

Default

I don't do Kolsch but a lot of my ales don't show airlock activity for 18 to 24 hours with some going to 30 hours. If you have the foam (krausen) your yeast are getting busy.

__________________
RM-MN is offline
 
Reply With Quote Quick reply to this message
Old 11-24-2012, 01:39 PM   #10
JonM
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
JonM's Avatar
Recipes 
 
Join Date: Aug 2010
Location: Milwaukee
Posts: 4,571
Liked 844 Times on 582 Posts
Likes Given: 71

Default

Looks like a nice recipe! And +1 to the comment about Kolsch yeast staying in suspension for weeks. I make a lawnmower beer with Kolsch yeast - I've had good luck clearing it with gelatin a couple days before bottling. Cheers!

__________________
Who is this Rorschach guy? And why did he paint so many pictures of my parents fighting?
JonM is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Let's Make a Kolsch...Colorado Kolsch that is! benbradford Recipes/Ingredients 5 09-16-2011 02:00 PM
kolsch/honey kolsch bc23 Extract Brewing 4 06-21-2011 10:09 PM
Kolsch with non kolsch yeast... Seabee John Recipes/Ingredients 6 04-24-2011 06:28 PM
Bad efficiency with Kolsch--Global Kolsch issue? kansasbrew All Grain & Partial Mash Brewing 6 05-22-2010 04:03 AM
What makes a Kolsch a Kolsch? McCall St. Brewer General Beer Discussion 2 02-16-2006 02:10 PM



Newest Threads

LATEST SPONSOR DEALS