Spike Brewing 12.5 Conical Fermenter Giveaway - Enter Now!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > First AG = ~8 Hours!

Reply
 
LinkBack Thread Tools
Old 01-28-2008, 08:07 PM   #1
Acidjazz54
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2007
Location: Sanford, NC, North Carolina
Posts: 147
Likes Given: 7

Default First AG = ~8 Hours!

Well, today was my first shot at All-Grain. I started around 8:00 AM and just put her in the primary. All in all nothing seemed to go too wrong other than the fact that I forgot to take a pre-boil SG so I'm not sure that I can get my efficiency. Also I think I need to change my mash tun (small leak).

I'm sure that as I get more used to it, it will go faster. Any hints/tips to help make it go faster? Of course, they do say that good things come to those who wait. I guess we'll see in about 6 weeks.

__________________
Acidjazz54 is offline
 
Reply With Quote Quick reply to this message
Old 01-28-2008, 08:12 PM   #2
Evan!
Feedback Score: 0 reviews
 
Evan!'s Avatar
Recipes 
 
Join Date: Aug 2006
Location: Charlottesville, VA
Posts: 11,901
Liked 69 Times on 61 Posts
Likes Given: 1

Default

Uh, well, we need more info about your process. A standard-gravity (~1.055) AG with my hodgepodge system takes about 4 hours from the minute I fire up the burner to heat the strike water to the point where I'm all cleaned up. With practice comes efficiency. You come to expect things, you know what you need to do when, and you utilize the time better. For instance, now that I have a 60-qt kettle, I can wait for the hotbreak, then just leave the kettle boiling relatively unattended, and come back only for the hop additions. In the meantime, I clean up the stuff that won't be used again, get my carboy sanitized, and take care of any miscellaneous stuff.

__________________
MOSS HOLLOW BREWING CO.
Aristocratic Ales, Lascivious Lagers


.planned:
•Scottish 80/- •Sweet Stout •Roggenbier
.primary | bright:
98: Moss Hollow Soured '09 72: Oude Kriek 99: B-Weisse 102: Brett'd BDSA 104: Feat of Strength Helles Bock 105: Merkin Brown
.on tap | kegged:
XX: Moss Hollow Springs Sparkling Water 95: Gott Mit Uns German Pils 91b: Brown Willie's Oaked Abbey Ale 103: Merkin Stout
98: Yorkshire Special 100: Maple Porter 89: Cidre Saison 101: Steffiweizen '09 (#3)
Evan! is offline
 
Reply With Quote Quick reply to this message
Old 01-28-2008, 08:14 PM   #3
Desert_Sky
Feedback Score: 0 reviews
 
Desert_Sky's Avatar
Recipes 
 
Join Date: Mar 2006
Location: Sierra Vista, AZ
Posts: 4,090
Liked 35 Times on 32 Posts
Likes Given: 2

Default

once you really know your system, and can start anticipating heating and or cooling times which will speed things up. Once you know your system, you will trust it enough to know exactly where you are in the process, and can then start multitasking more.

being able to do multiple things at once is when you start getting down into the 4 hour range.

__________________
Desert_Sky is offline
 
Reply With Quote Quick reply to this message
Old 01-28-2008, 08:21 PM   #4
Beerthoven
Feedback Score: 0 reviews
 
Beerthoven's Avatar
Recipes 
 
Join Date: May 2007
Location: Cary, NC
Posts: 2,175
Liked 11 Times on 10 Posts
Likes Given: 2

Default

My first AG took a long time, too. But my last AG only took 3.5 hours from mash-in to pitch. Its a learning experience. Once you get comfortable with the process you'll find ways to shorten it.

Some things that help me are:

Print a recipe/brew sheet (I use BeerSmith) and use it for taking notes and keeping track of times
Prep ingredients while heating strike water.
Be ready with your mash out and sparge water.
Make use of mash and boil "down times" to clean, sanitze, and get ready for the next step.
Have a good burner so can get to boiling as fast as possible (15 minutes or less).
Have a good chiller so you can cool down to pitching temps as fast as possible (20 minutes or less).
Use an O2 tank and diffusion stone so you can aerate in 1 minute.
Don't start drinking too soon.

I used to do a lot of prep before getting started. For example, I used to clean and sanitize everything and have all my ingredients weighed out and ready to go even before putting on the strike water to heat. Now I just start with the strike water and do everything else as needed. Same with cleanup. Don't wait until the end to clean, do it as you go along.

__________________

Primary/Secondary: #109 Rye, #110 APA

Kegged: #106 American Wheat, #107 IPA, #108 Nut Brown

Planned: Red IPA, American Brown


Last edited by Beerthoven; 01-28-2008 at 08:58 PM.
Beerthoven is offline
 
Reply With Quote Quick reply to this message
Old 01-28-2008, 08:24 PM   #5
Orfy
For the love of beer!
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Orfy's Avatar
Recipes 
 
Join Date: Sep 2005
Location: Cheshire, England
Posts: 11,853
Liked 69 Times on 52 Posts
Likes Given: 30

Default

Batch sparge and heat first runnings whilst doing first sparge.
Clean and put equipment away as you go along.

Orfy is offline
 
Reply With Quote Quick reply to this message
Old 01-28-2008, 08:31 PM   #6
Lil' Sparky
Cowboys EAC
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Lil' Sparky's Avatar
Recipes 
 
Join Date: Feb 2006
Location: Honolulu, HI
Posts: 4,013
Liked 49 Times on 32 Posts

Default

All good suggestions. I'll add one more.

One thing I do that helps get me going is to have the recipe and volumes, etc. sorted and printed out in advance. Then the first thing I do is start heating my strike water. During that time I finish dragging out and setting up the rest of my equipment. I've got a digital thermo w/ an alarm that tells me when the strike water is up to temp. By the time the alarm goes off, everything else is out and set up, I've crushed the grain, and I'm ready to dough in.

On the other end, I've got most everything put away by the time the boil's over, leaving me with little to do once I'm done chilling.

I remember how the first few times I got mesmerized by what was going on during the different steps. Now it's easier to walk away and piddle with the other things I could be doing.

__________________
Quote:
Originally Posted by duffman2 View Post
I dub this beer the Double Slutty Triple Nutty Bodacious Booty Brunette!
Lil' Sparky is offline
 
Reply With Quote Quick reply to this message
Old 01-28-2008, 09:13 PM   #7
Acidjazz54
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2007
Location: Sanford, NC, North Carolina
Posts: 147
Likes Given: 7

Default

Thank you guys for all of the responses. I will keep all of these suggestions in mind as I move forward. All in all i'm not disappointed just slightly surprised at the length.

I think the boiling/heating times were one of the major problems, I was outside in the 20 degree weather (gotta love Western NY).

Thanks again all.

__________________
Acidjazz54 is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
over 72 hours, uh oh... ziggy13 Beginners Beer Brewing Forum 18 09-03-2009 01:19 PM
36 hours Penguin General Chit Chat 21 02-24-2009 05:04 PM
1.042 to 1.024 in less then 24 hours possible? Pivzavod Beginners Beer Brewing Forum 4 12-07-2008 06:16 PM
Okay, It's been 68 hours.... TheBone Beginners Beer Brewing Forum 14 01-23-2008 03:35 PM
Well, it's been about 72 hours... burton178 Beginners Beer Brewing Forum 9 11-13-2007 10:36 PM