Spike Brewing 12.5 Conical Fermenter Giveaway!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > EZ Water and Bru'n Water Differ Drastically

Reply
 
LinkBack Thread Tools
Old 10-03-2012, 12:48 AM   #21
TFrankMac
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Erie, PA
Posts: 23
Default

Messed around with it some more and I am still getting the same output.

__________________
TFrankMac is offline
 
Reply With Quote Quick reply to this message
Old 10-03-2012, 07:26 PM   #22
DSmith
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Robbinsdale, MN
Posts: 777
Liked 60 Times on 50 Posts
Likes Given: 12

Default

Can't explain the differences.

But, I have mashed very similar grain bills and used Maris Otter, even measured the pH of Crisp Maris Otter in distilled water and got about 5.6 pH.

I'm pretty confident that using 100% of your tap water with 0.5 grams of CaSO4 added per gallon of water & 0.25 grams of CaCl2 added per gallon of water would give you a mash pH of about 5.5 measured at room temperature.

I'd save the RO water for your sparge (100% RO), measure out the CaSO4 & CaCl2 using the same weights per gallon and add to your sparge water or boil kettle.

The final water profile would be about 60 ppm Ca, 40 ppm Cl & 90 ppm SO4.

__________________
DSmith is offline
 
Reply With Quote Quick reply to this message
Old 10-04-2012, 07:54 PM   #23
diS
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
diS's Avatar
Recipes 
 
Join Date: Apr 2011
Location: Croatia
Posts: 1,018
Liked 45 Times on 43 Posts
Likes Given: 12

Default

I never had that big difference, but this is what ajdelange answered when I asked same question:

Quote:
Originally Posted by ajdelange View Post
Wish I had a nickle for each time I've answered this one. Calculation of mash is theoretically fairly simple but there are practical difficulties in implementation. AFAIK neither of the two spreadsheets you are comparing uses a 'robust' model as this would required iterative solution and while that is easy enough to do with Excel it's probably not something the casual user will want to be bothered with. Even if they did use the robust model it would be very difficult to obtain the data the robust model requires (which among other things says the robust model isn't that robust). This is because the model needs to know the titration curve for each malt in the grist and that varies with malt type, barley cultivar, moisture content, maltings, crop, batch number and, most significantly, mash time and temperature.

Thus the spreadsheets and calculators must use a much simpler model which approximates the behaviour of, for example, a representative 40L crystal. The models are the province of the spreadsheet creators. Some use measured data, some use correlations with malt color, some have empirical tweaks etc. In modeling there are an infinite number of degrees of freedom. Different model, different results. The democrat's model of Obama care is that it will make excellent medical care available to everyone while dramatically reducing the costs. The republican model is that it will destroy our medical care system and take the rest of the economy down with it [just noticed you are in Croatia so this is probably not a terribly meaningful example to you]. Using that as an illustration makes the obvious question stand out in capital letters: which model do you use/accept/believe? Or should you average the results of the two. In the mash pH model the average of the two is 5.48 and that's about what you would get if you left out the baking soda. With baking soda, the mash pH will be higher - probably closer to what EZ predicts so in this case EZ is probably the better predictor but it is very likely Brun water will be the better predictor in other cases. Your best course is to use both spreadsheets while carefully measuring the actual mash pH you obtain when you brew. You will discover from this process which of the two better models your brewing materials and practices and this may depend on style. In the future you can then use that spreadsheet but by that time you will find the combination of your pH meter and experience more powerful than a spreadsheet and rely on them. Eventually the pH meter will go the same way.

The sodium calculation is very easy for a spreadsheet or calculator so if the two spreadsheets are giving you conflicting answers it's likely you are not entering the same data so check that.

Until such time as you get the spreadsheet thing sorted out you might want to just follow the recommendations of the Primer.

It is most important that you do not add any bicarbonate. This will drive mash pH as high or higher than the EZ prediction. Also there is no need for the magnesium sulfate. You can use some as an additional source of sulfate if you want that but beer generally tastes better with lower magnesium (though it may help you to live longer).
There is so much environment factors that affects pH and its pretty tough to make realistic calculation.

One of most variable factors is barely, it seems that the key to get right pH is reaction between Ca and Mg with malt phytin which produces acids to decrease alkalinity (left over alkalinity is RA). And result of that reaction would be part of the reason why calculators have diff. pH result.

Hope it helps.
__________________

We are only 10,000 years into beer... there are thousands of years left to go!
Things are bound to change!!

Brewroom with HERMS build
Fermentation chamber and Keezer.. a.k.a. FermKeezer

diS is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Basic water chemistry with bottled spring water Kosch All Grain & Partial Mash Brewing 6 09-12-2012 11:05 AM
Bru'n water RA? Braufessor All Grain & Partial Mash Brewing 1 06-16-2012 02:25 PM
Bru'n Water Spreadsheet Profiles 28S All Grain & Partial Mash Brewing 2 01-19-2012 04:43 PM
2 Gallons of Water Below False Bottom - Opinion on Mash Water Amounts Jewrican All Grain & Partial Mash Brewing 10 07-15-2011 03:55 AM
EZ Water vs. Bru'n Water for dark beers afr0byte All Grain & Partial Mash Brewing 2 04-05-2011 02:23 PM