Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   All Grain & Partial Mash Brewing (http://www.homebrewtalk.com/f36/)
-   -   conversion kit for 5 gallon rubbermaid cooler? (http://www.homebrewtalk.com/f36/conversion-kit-5-gallon-rubbermaid-cooler-12095/)

Steve973 08-09-2006 05:47 PM

conversion kit for 5 gallon rubbermaid cooler?
I have a conversion kit for my 10 gallon igloo cooler, and I like it a lot. This is the kit that supplies a weldless bulkhead and ball valve to convert the spout-hole in the cooler to a useable valve. I'd also like to find one of these for my 5 gallon rubbermaid cooler, but I haven't had any luck in finding one so far. It's really irritating to have to use a 1-hole stopper in the bottom because i fear that we'll knock it out and ruin a day of brewing when all of the mash liquid pours out of the cooler. Something similar to what we use for the 10 gallon cooler would be great for the 5 gallon orange rubbermaid cooler.

Suggestions, please?

the_bird 08-09-2006 05:50 PM

Go to Depot and build one, lot of us have the same cooler. Very easy, couldn't tell you an exact cost because I ended up buying too many pieces, but probably not much more than $20 or so.

Instructions here:

Don't be afraid of the plumbing department. Plumbers put their pants on one leg at a time, they just don't hitch them up all the way.

EdWort 08-09-2006 06:21 PM

Target should have the Blue Rubbermaid Victory Cooler for $19.99. It may still be on sale for $17.99. The bulkhead will fit just fine as it works great on mine.

All times are GMT. The time now is 04:32 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.