Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Confused about preboil gravity

Reply
 
LinkBack Thread Tools
Old 04-26-2010, 12:29 AM   #1
amazinglarry
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2009
Location: new york
Posts: 100
Liked 1 Times on 1 Posts

Default Confused about preboil gravity

Hi folks. Did my second AG yesterday and had an issue I don't understand. I mashed in with 15 qts. and after an hour these runnings had a gravity of 1067. I am shooting for 1049 so I just figured after sparging it would be right (correct assumption?). However, after sparging 5 gallons I was reading 1014. At first I assumed I was misreading somehow given the drastic drop, but I measured a couple of times and kept getting 1014. Even accounting for temperature adjustments this was a drastic drop.

I think I did a couple of things wrong, first I think I didn't let the sparge water sit long enough (I was batch sparging by the way). Second I should have stirred the sweet wort after sparging before taking a reading. Also, 5 gallons seemed like a lot to sparge with to me but I was following BeerSmith. Lastly I think I just f'd up somehow with my readings. I bought a refractomoter later that afternoon I was so frustrated. I'm not sure how much sweet wort I had after both runnings but it had to be around six gallons

I boiled for two hours to try and correct the low gravity. I ended up with about 3.5 gallons of wort, although I was happy that the OG was 1054 since I was shooting for 1057.

Thoughts?

__________________

Last edited by amazinglarry; 04-26-2010 at 12:34 AM.
amazinglarry is offline
 
Reply With Quote Quick reply to this message
Old 04-26-2010, 12:33 AM   #2
Rick500
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: KY
Posts: 2,617
Liked 9 Times on 7 Posts
Likes Given: 1

Default

Batch sparging, you don't need to wait after you put in the sparge water. Just stir it up really well and then vorlauf.

I think your issue must have been not stirring well before taking your reading.

Your OG at the end of the brew day seems pretty much in line.

__________________
Rick500 is offline
 
Reply With Quote Quick reply to this message
Old 04-26-2010, 12:36 AM   #3
martinworswick
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2008
Location: southernlakes,new zealand
Posts: 285
Liked 3 Times on 3 Posts
Likes Given: 2

Default

this is normal,the first runnings will be crammed with sugars and have a high sg and towards the end of the sparge you'll have most of the sugars out thus the low sg.
to get a true reading you have to mix all this up as the the high sg wort is denser and hangs out on the bottom of the kettle with the lower sg stuff floating on top, the convection in the kettle mixes it all during the boil hence the reading you were anticipating post boil

__________________
martinworswick is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
preboil gravity and efficiency problems andrew300 All Grain & Partial Mash Brewing 9 03-17-2010 10:50 PM
Problem hitting preboil gravity target Mongo64 All Grain & Partial Mash Brewing 16 07-11-2009 03:51 AM
How can my preboil gravity be off, but my OG on? chefchris All Grain & Partial Mash Brewing 16 06-29-2009 04:26 PM
Confused about my gravity - help!! Nexus555 Extract Brewing 3 03-19-2007 02:25 PM
Preboil gravity will go up over time? Ó Flannagáin All Grain & Partial Mash Brewing 6 02-27-2007 07:00 PM