Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > building AG Set-up???

Reply
 
LinkBack Thread Tools
Old 12-12-2007, 03:40 PM   #1
Getnit
Feedback Score: 0 reviews
 
Getnit's Avatar
Recipes 
 
Join Date: Nov 2007
Posts: 14
Default building AG Set-up???

I have Designed a Gravity Flow AG Set-up with a Pump To Recirculate the mash tun(Sparging?). Here Is What I have

Turkey Fryer burner
12 Gallon Ice Cube Cooler For Mash Tun
15 Gallon Keggle
5 Gallon Keggle
1 foods Grade Pump

My Question is if the 5 gallon Keggle is big enough for the hot liquor tank?

or do I locate another 15 Gallon one or use a 10 gallon Rubermaid? Whats You Thoughts?

I have done only 3 extracts, 1 cider and I am looking for the ability to be more creative. ITS ADDICTING!!!!

Thanks,

__________________

New To HB
but, why take your time....

ON TAP : Apfelwein
SECONDARY : First Beer Tools creation
SECONDARY : Second Creation
Primary : Design process


Bottled: Oktoberfest,Honey Blond, Apricot Hef
Kegged: Witbeir, Brown Ale, Apfelwein

In the Design phase for AG Set-up

Getnit is offline
 
Reply With Quote Quick reply to this message
Old 12-12-2007, 04:17 PM   #2
wilserbrewer
Vendor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 9 reviews
 
wilserbrewer's Avatar
Recipes 
 
Join Date: May 2007
Location: Jersey Shore, Jersey
Posts: 6,554
Liked 390 Times on 335 Posts
Likes Given: 8

Default

Wow...four batches and your ready to pump!! Get your feet wet, check out the sources below. I would recomend working on the process for a while rather than a "set-up". FYI, an HLT can be anything that can heat a sufficient volume of water...additionally...your kettle can do double duty and function as an HLT also, if you simply have another container to hold the wort during the sparge process.

To answer your question, 5 gal. is small for a HLT. you could make it work temporarily I guess. Check out the links below for simple all grain techniques.

http://cruisenews.net/brewing/infusion/index.php
http://www.tastybrew.com/articles/dennyconn001

__________________
wilserbrewer is offline
 
Reply With Quote Quick reply to this message
Old 12-12-2007, 04:24 PM   #3
Lil' Sparky
Cowboys EAC
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Lil' Sparky's Avatar
Recipes 
 
Join Date: Feb 2006
Location: Honolulu, HI
Posts: 4,013
Liked 47 Times on 32 Posts

Default

Way to get a running start. Do you have plans for your brew sculpture yet?

The 5 gal HLT will be big enough for most 5 gal batches, but you'll need at least double that if you want to brew 10 gal batches. I think I usually sparge with 8-9 gals for a typical 10 gal batch.

__________________
Quote:
Originally Posted by duffman2 View Post
I dub this beer the Double Slutty Triple Nutty Bodacious Booty Brunette!
Lil' Sparky is offline
 
Reply With Quote Quick reply to this message
Old 12-12-2007, 05:37 PM   #4
TexLaw
Here's Lookin' Atcha!
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
TexLaw's Avatar
Recipes 
 
Join Date: Sep 2007
Location: Houston, Texas
Posts: 3,695
Liked 24 Times on 23 Posts

Default

Like Lil' Sparky said, a five gallon HLT is big enough for a five gallon batch. With my five gallon batches, I usually mash in with somewhere around 3-5 gallons, and I usually sparge with somewhere around four gallons.

It sounds like you're setting up for larger batches, though, so you'll need that larger HLT.


TL

__________________
Beer is good for anything from hot dogs to heartache.

Drinking Frog Brewery, est. 1993
TexLaw is offline
 
Reply With Quote Quick reply to this message
Old 12-12-2007, 09:33 PM   #5
Judd
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2007
Location: Halifax, Canada
Posts: 279
Default

You'll need a larger HLT, it's true. I think you should also invest in a wort chiller. They're easy to make, pretty cheap if you don't screw up, and they work so much better than a bath of ice, it'll knock your socks off.

__________________
The Greenwall
Judd is offline
 
Reply With Quote Quick reply to this message
Old 12-12-2007, 09:50 PM   #6
BierMuncher
...My Junk is Ugly...
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
BierMuncher's Avatar
Recipes 
 
Join Date: Jan 2007
Location: St. Louis, MO
Posts: 12,124
Liked 562 Times on 332 Posts
Likes Given: 201

Default

I'd love a pump and will get one when my back gives out in 40 years.

I'd swap the pump for an immersion chiller though.

Can't do AG, full boils without a way to quickly cool that wort.

__________________

*******
Check Out My Rolling Kegerator

BierMuncher Tried & Trues:
Tits-Up IIPA (3-Time Medalist), Black Pearl Porter, Kona Pale Ale, Outer Limits IPA, Centennial Blonde (4.0%), Nierra Sevada (SNPA), SWMBO Slayer Belgian Blonde,

BierMuncher is offline
 
Reply With Quote Quick reply to this message
Old 12-13-2007, 05:53 AM   #7
Getnit
Feedback Score: 0 reviews
 
Getnit's Avatar
Recipes 
 
Join Date: Nov 2007
Posts: 14
Default

Thanks for all your suggestions. I do have a sculpture designed out. I spent this after noon cutting 100 ft of 3/4 square tubing to dimensions. I got 140 ft for trading 1/2 of the first AG batch. Its Simple yet designed for space saving when not in use. After your suggestions I will be waiting my first full run until I have a Larger HLT or another Keggle. I will post some picts when I get It built.

Thanks Again,

__________________

New To HB
but, why take your time....

ON TAP : Apfelwein
SECONDARY : First Beer Tools creation
SECONDARY : Second Creation
Primary : Design process


Bottled: Oktoberfest,Honey Blond, Apricot Hef
Kegged: Witbeir, Brown Ale, Apfelwein

In the Design phase for AG Set-up

Getnit is offline
 
Reply With Quote Quick reply to this message
Old 12-13-2007, 01:58 PM   #8
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 21,830
Liked 903 Times on 601 Posts
Likes Given: 26

Default

I was also cutting metal last night. I put like 25 old bedframes out of their misery. I can't help but think about the people who put them out on the curb for trash pickup. I wonder if it would make them giggle if they knew it was now going to help me make beer.

If anyone is thinking about cutting this much metal with a chop saw, I just want to tell you that it's about the nastiest part of "metal shop" ever. Sparks, fumes, noise, metal dust EVERYWHERE, dangerous!!! Please wear gloves, goggles, earplugs and a respirator.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Old 12-15-2007, 06:13 AM   #9
Getnit
Feedback Score: 0 reviews
 
Getnit's Avatar
Recipes 
 
Join Date: Nov 2007
Posts: 14
Default Progress Update....





Its getting there still needs two more Keggles, and fittings ect. It is designed to compact for storage. Any thoughts or suggestions before I get any further along???

Thanks,
ag1.jpg   ag2.jpg  
__________________

New To HB
but, why take your time....

ON TAP : Apfelwein
SECONDARY : First Beer Tools creation
SECONDARY : Second Creation
Primary : Design process


Bottled: Oktoberfest,Honey Blond, Apricot Hef
Kegged: Witbeir, Brown Ale, Apfelwein

In the Design phase for AG Set-up

Getnit is offline
 
Reply With Quote Quick reply to this message
Old 12-15-2007, 12:51 PM   #10
Wables
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2006
Location: Duluth, MN
Posts: 213
Default

What do you need 2 more keggles for? I only use 3, or 2 and a mash cooler. It looks like you have 2 already.

__________________

Wables

Beer-
On Deck: Yo Mama!
Primary: Oatmeal Stout, 219 APA
Secondary:Honey Blonde
Keggerator:Apfelwine, Honey Blonde

Wine-
Primary-
Secondary- Simply Strawberry (5 gal), Strawberry-Rhubarb (2 gal),Plum (5 gal)

Wables is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need Help Building a CD BleedsDogFish General Chit Chat 1 12-12-2008 09:46 PM
Building a Bar bconsidi Equipment/Sanitation 2 09-03-2008 05:19 AM
Building a Wet Bar Lepoc2635 DIY Projects 9 07-27-2007 10:03 PM
Building my first MLT Turkeyfoot Jr. Equipment/Sanitation 8 07-17-2007 06:05 PM
Building an FAQ Cheesefood HomeBrewTalk Announcements & Feedback 6 10-14-2005 05:05 AM