Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Brew in a bag small batches. extra grain?
Reply
 
LinkBack Thread Tools
Old 10-05-2012, 04:23 PM   #1
vadem
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Newport News, VA
Posts: 16
Default Brew in a bag small batches. extra grain?

Hi,

I'm thinking of diving into all-grain (after having done several mini-mash kits) by getting a "regular" all grain kit and dividing it into 2 batches and doing brew-in-a-bag method. It was suggested to me that because this method might have less efficiency, it might be wise to add some extra grain to make up for it. My question is: How much grain for, say, a 2 1/2 gallon batch with roughly 5lbs of grains? (just thinking of a typical kit)

And would it be base grains added or a little bit of base and specialty grains? The type might be subjective but I was wondering if anyone had an idea of the quantity of extra I might add to try to get the efficiency up. Probably not an exact science.

Thanks!

__________________
vadem is offline
 
Reply With Quote Quick reply to this message
Old 10-06-2012, 02:08 AM   #2
hafmpty
Feedback Score: 1 reviews
Recipes 
 
Join Date: Jan 2010
Location: Cincinnat, OH
Posts: 294
Liked 12 Times on 11 Posts
Likes Given: 5

Default

Don't add extra specialty grains. Add about 10% more base grain and you'll be fine. Honestly though if you crush the grains finer you really should be fine. I brew both BIAB and traditional all grain and I consistently get better extraction with BIAB. If you can't crush finer, crush twice. I think you'll find it comes out just like I supposed to.

__________________
hafmpty is offline
 
Reply With Quote Quick reply to this message
Old 10-06-2012, 02:26 PM   #3
flipfloptan
Feedback Score: 1 reviews
Recipes 
 
Join Date: Sep 2010
Location: upstate of SC
Posts: 290
Liked 16 Times on 14 Posts
Likes Given: 5

Default

It depends on your set up. I BIAB 5gallons and 1 gallon test batches. I made one 2 gallon test batch to have enough wort to use hydrometer on and my efficiency is about the same. Therefore I just 1/5th any recipe that sounds interesting but not interesting enough for 5 gallons yet.

Whats weird is that my 1 gallon batches are tasting much better than 5 gallon batches. I think easier temperature control on mash and the ease in cooling wort in 1 gallon batches to ferm. temps is the reason. Need to work on my immersion chiller or see if Santa will get me a Blickman plate chiller.

__________________
flipfloptan is offline
 
Reply With Quote Quick reply to this message
Old 10-06-2012, 04:31 PM   #4
ron,ar
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
ron,ar's Avatar
Recipes 
 
Join Date: Feb 2007
Location: Little Rock, arkansas
Posts: 309
Liked 14 Times on 11 Posts
Likes Given: 1

Default

I do small batches because I can do them in the kitchen easy as opposed to taking 6 hours to do a complete AG brew. My biggest problem is figuring out the hop amount in a smaller amount as my scale doesn;t show less than 1/2 ounce. Also remember to account for volume loss in smaller batches...it becomes more critical in a smaller amount. I don't like to add top off water after the boil, I like the idea of boiling everything that goes into the fermenter. I do 1 gallon batches often and have a 2 gallon MLT made from a small Coleman round cooler.

__________________
ron,ar is offline
 
Reply With Quote Quick reply to this message
Old 10-06-2012, 04:35 PM   #5
seabass07
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
seabass07's Avatar
Recipes 
 
Join Date: Apr 2011
Location: Brothell
Posts: 1,245
Liked 120 Times on 91 Posts
Likes Given: 70

Default

I don't think you will get less efficiency from smaller mashes. Squeeze the bag and rinse more sugars out by drizzling some sparge water and squeezing again. I consistently got great efficiency with biab. The cooler gets good efficiency as well, but it is slightly lower.

__________________
Fermenter 1: Beer
Fermenter 2: Beer
Fermenter 3: Beer
Fermenter 4: Beer
seabass07 is offline
 
Reply With Quote Quick reply to this message
Old 10-08-2012, 12:25 PM   #6
vadem
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Newport News, VA
Posts: 16
Default

Thanks for the responses. I think I might just try dividing it in half and seeing what happens just to get a baseline efficiency. Then when I do the second "half" I might add grains and measure again. How much wort would you all say evaporates off during the boil? For a 2 1/2 gallon batch, how much should I start with so I don't have to add much or any top-off water at the end? I'm guessing I would need a little more than 3 gallons to start the boil.

Thanks again!

__________________
vadem is offline
 
Reply With Quote Quick reply to this message
Old 10-08-2012, 12:41 PM   #7
hafmpty
Feedback Score: 1 reviews
Recipes 
 
Join Date: Jan 2010
Location: Cincinnat, OH
Posts: 294
Liked 12 Times on 11 Posts
Likes Given: 5

Default

Quote:
Originally Posted by vadem View Post
How much wort would you all say evaporates off during the boil?
My 4gal pot boils off .875gal per hour. I've calculated it out though that's how I know. I would assume if you start about 1gal higher than your final volume you should be close.

If you want to conduct an evaporation test, you'll have a closer idea of your rate. Just get 2 or 3 (preferably 3 since that's your boil size, or close to it). Then set the timer for 60 minutes once the boil starts and take a measurement after the boil is over. Remember too that water expands as it's temperature rises and contracts as the temperature drops. Your volume of water just after you turn the heat off will be about 4% more than when it's chilled to pitching temps.

The other thing to factor is the amount that evaporates off while your heating the water up to boiling. All these tests and measurements are by no means necessary, it's part of dialing in your system though. Good luck!
__________________
hafmpty is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
brew in a bag, small batches MKEbrew All Grain & Partial Mash Brewing 15 09-01-2012 05:58 AM
can I get an extra small batch of low gravity beer from extra sugars in mash crlova2 All Grain & Partial Mash Brewing 5 08-17-2010 06:45 PM
Small (2.5 gallon) All Grain Batches? thesanch All Grain & Partial Mash Brewing 30 02-16-2010 08:13 PM
AG in small batches dinertime All Grain & Partial Mash Brewing 2 10-18-2009 01:52 AM
Small Batches Cranus All Grain & Partial Mash Brewing 2 10-08-2006 09:53 AM