Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > About to brew
Reply
 
LinkBack Thread Tools
Old 03-14-2009, 02:47 AM   #1
HughBrooks
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2009
Location: Richmond, VA
Posts: 215
Default About to brew

I am getting ready to brew my amber ale in the morn.This is a partial mash recipe and I am going to use the BIAB. I was just wondering about how much water should I use per pond of grain for my mash and for my sparge? Any input would be appreciated

__________________
HughBrooks is offline
 
Reply With Quote Quick reply to this message
Old 03-14-2009, 03:20 AM   #2
BuzzCraft
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Blacksburg, VA
Posts: 426
Default

Lots of options, but the most common volume is probably 1.25 quarts/pound for the mash. I assume by sparge you're talking about rinsing your grains in another pot to get the residual sugar out, in which case you can either use the same volume or decrease it if your boiling pot will not handle the total volume from the original mash vessel plus the spage (which is what I end up having to do...1.25 qt/lb for the mash and 1 qt/lb for the rinse/sparge). If you're boil pot volume can handle more, you can try a thinner mash of up to 2 qts per pound, which may increase your efficiency acc to a recent thread here on the boards. You can then rinse/sparge with 1-1.25. When you're trying to figure how much wort you'll have to boil, remember that your grains will absorb about 0.2 gallons/lb of grain, give or take.
You might get more informed responses than this, but if not, these options will work for you.
Good luck with it...

__________________
BuzzCraft is offline
 
Reply With Quote Quick reply to this message
Old 03-14-2009, 03:37 AM   #3
ajf
Senior Member
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
ajf's Avatar
Recipes 
 
Join Date: Oct 2005
Location: Long Island
Posts: 4,643
Liked 100 Times on 94 Posts
Likes Given: 39

Default

I've never done a BIAB or even a partial mash, so take this for what it's worth.
You can mash with anything from 1 to 2 qts water per pound of grain.
I would be inclined to use as close to 2 qts per lb as you can manage without collecting more wort than you can boil. The grain will absorb about 1 pint per lb.
If somebody else with experience of the procedure disagrees with me, then believe them.

-a.

__________________
ajf is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
New brew schedule... or how to brew with toddlers! (input/advice sought!) Zymurgrafi All Grain & Partial Mash Brewing 56 10-22-2013 06:22 PM
Price to build the Brew Magic Brew system! vanwolfhausen Equipment/Sanitation 14 11-24-2010 06:01 PM
22 quart cooler, 2 4 gallon brew pots: how much can I brew AG? Cugel All Grain & Partial Mash Brewing 9 05-31-2008 10:40 AM
Brew Shop closed. Best yeast to buy for hard apple cider brew? britishbloke Beginners Beer Brewing Forum 8 01-10-2007 03:48 AM



Newest Threads

LATEST SPONSOR DEALS