Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Bottling/Kegging (http://www.homebrewtalk.com/f35/)
-   -   Y splitter on a y splitter (http://www.homebrewtalk.com/f35/y-splitter-y-splitter-369255/)

adriedel 11-21-2012 06:01 PM

Y splitter on a y splitter
 
I want to run 4 corny kegs. I have a 1 regulater I want all kegs a same PSI. Is it ok to run a y splitter them have 2 y splitter on that and hook all 4 kegs to thats.

bknifefight 11-21-2012 06:17 PM

It will be fine if you did that but it is much nicer looking to have a 4 way distributor.

jmichaeldesign 11-21-2012 10:18 PM

Id go ahead and start looking for another regulator. You'll want to be able to serve different beers at different pressures.

dcarter 11-21-2012 10:24 PM

I have three kegs in my kegerator adriel and I did it the same way that you are describing except I used a T and a Y.

somedudefromguam 11-22-2012 05:35 PM

1 Attachment(s)
I did it like this, seemed logical. 3 T's and 4 kegs in a line.

BBL_Brewer 11-22-2012 05:41 PM

You're just makiing a manifold. If it's cheaper that way then to buy one, go for it.

Antler 11-22-2012 10:59 PM

1 Attachment(s)
Quote:

Originally Posted by BBL_Brewer
You're just makiing a manifold. If it's cheaper that way then to buy one, go for it.

Exactly. I use a two outlet regulator. Off one I have a two output manifold and the other I have a 4 output manifold. I built both these manifolds with parts I bought at an auto parts store for about 30 bucks.

Looks just like the one pictured.


All times are GMT. The time now is 02:12 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.