Spike Brewing 12.5 Conical Fermenter Giveaway - Enter Now!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Where is my leak?

Reply
 
LinkBack Thread Tools
Old 08-20-2007, 01:50 PM   #1
Striker169
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2007
Location: Austin, Tx.
Posts: 27
Default Where is my leak?

Ok so I have a dual body regulator hooked up to a 5# tank. I had a full tank and after about 6-8 hours after hooking it up to my kegs I had only about 1/3 left. Now if I leave it unhooked from the keg, I can hold pressure but as soon as a I connect I seem to loose it. I got a spray bottle and soapy water and I sprayed all over the top of the kegs and didnt see any bubbles or anything and dont hear a leak... any help/advice?

__________________
Striker169 is offline
 
Reply With Quote Quick reply to this message
Old 08-20-2007, 01:53 PM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 21,904
Liked 939 Times on 625 Posts
Likes Given: 28

Default

If I had a dollar for everytime this came up....

How do you know how much CO2 you have left? The gauge? That doesn't work. Weigh the tank, then subtract the tare weight stamped on the side. That will tell you how many pounds of liquid CO2 is still in there.

The pressure changes depending on the temperature so everytime you put it in the fridge, you think you're losing gas.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Old 08-20-2007, 02:20 PM   #3
david_42
Feedback Score: 0 reviews
 
david_42's Avatar
Recipes 
 
Join Date: Oct 2005
Location: Willamina & Oak Grove, Oregon, USA
Posts: 25,651
Liked 133 Times on 126 Posts

Default

1. Disconnect all kegs. Open and shut the tank valve, check low-pressure gage pressure in 24 hours. If it hasn't changed, the basic setup is ok.
2. Hookup one keg, repeat 24 hour test.
3. Check each line on the same keg.
4. Then start checking the rest of the kegs, one at a time.

I've got three regulators, five gas lines, 51 connections & 15 kegs. Leaks are a pain.

__________________

Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

david_42 is offline
 
Reply With Quote Quick reply to this message
Old 08-20-2007, 02:37 PM   #4
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 21,904
Liked 939 Times on 625 Posts
Likes Given: 28

Default

David is right. I jumped to conclusions. Maybe you do have a leak. The troubleshooting list there is trying to determine if your leak is one of the kegs or in the regulator/disconnect side. It's probably a leaky lid. Get some keg lube for those O-rings.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Old 08-20-2007, 03:44 PM   #5
Philip1993
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2007
Posts: 1,658
Liked 7 Times on 7 Posts
Likes Given: 4

Default

I had a slow leak through the walls of a hose. LHBS told me that what I had was junk (quite old) and sold me a thick walled replacement hose. No leak since. Granted, it could have been the barb fitting, or crimp, but he seemed to have seen this a few times before. Apparently there are certain types of clear hose that become CO2 permeable as they age.

__________________
Philip1993 is offline
 
Reply With Quote Quick reply to this message
Old 08-20-2007, 08:14 PM   #6
Striker169
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2007
Location: Austin, Tx.
Posts: 27
Default

Well my tank weighs consierably less so I know it is not a temp difference in the guage reading. I tried taking the lines off the kegs last night to check and see that and it seems that there is a leak in the setup somehow... and possibly the kegs but I think I need to find the leak on the regulators first. Again I tried the soapy water and saw nothing any other tips on how to find this leak? I would think that by loosing half the pressure on the high side over night it would be fast enough to see with soapy water....

__________________
Striker169 is offline
 
Reply With Quote Quick reply to this message
Old 08-20-2007, 08:27 PM   #7
malkore
Feedback Score: 0 reviews
 
malkore's Avatar
Recipes 
 
Join Date: Jun 2007
Location: Nebraska
Posts: 6,922
Liked 32 Times on 30 Posts
Likes Given: 9

Default

Losing half your high side pressure would not mean you've lost half your CO2 tank...it would mean the tank is completely empty....OR....that you're noticing how CO2 pressure drops as temperature drops.

CO2 pressure stays constant as long as temperature is constant and there is still liquid CO2 in the tank. As soon as you're down to a few drops of CO2, the high side pressure rapidly drops to zero.
if there's even 2 ounces left in the tank it'll read 800psi at room temp, or 400-500psi inside a keg fridge.

Are you sure you have a leak?

__________________
Malkore
Primary: English Mild
On tap: Pale Ale, Lancelot's Wheat, English Brown Ale, Steam Beer, HoovNuts IPA
Bottled: MOAM, Braggot, Raspberry Melomel, Merlot, Apfelwein, Pyment, Sweet mead, Cabernet
Gal in 2009: 27, Gal in 2010: 34, Gal in 2011: 13, Gal in 2012: 10
malkore is offline
 
Reply With Quote Quick reply to this message
Old 08-21-2007, 01:58 AM   #8
Striker169
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2007
Location: Austin, Tx.
Posts: 27
Default

Well the tank has gotten considerably low, and the pressure was dropping even before I had the tank + kegs in the fridge

__________________
Striker169 is offline
 
Reply With Quote Quick reply to this message
Old 08-21-2007, 02:16 AM   #9
kvh
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2005
Location: Baltimore, MD
Posts: 343
Default

I had a leaky pressure-release valve on my keg. Took a while to find because of how the valve is built. Just my 2 cents.

kvh

__________________
Make beer, not bombs.
(...and not bottle bombs either.)
Primary Fermentor - *empty*
Primary Fermentor -

Secondary - Mystery IPA
Secondary -
Bottle Conditioning -
Keg Conditioning -

Draft: - Apfelwein, Belgian-style Dubbel w/ Grains of Paradise
Bottles:(and still in stock): FIRST AG - (I)IPA 4.1.07, PK's Warm Spring Marzen, Summer Cerveza -BANG, PK's Winter Spice II, Espresso Stout, Indiana Pale Ale, PK's Chocolate Bitter II, Porterfield Porter, and New Year's 2006 remnants.

kvh is offline
 
Reply With Quote Quick reply to this message
Old 08-21-2007, 02:29 AM   #10
Philip1993
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2007
Posts: 1,658
Liked 7 Times on 7 Posts
Likes Given: 4

Default

Quote:
Originally Posted by Striker169
Well the tank has gotten considerably low, and the pressure was dropping even before I had the tank + kegs in the fridge
At the risk of sounding rude: Is this your first gas bottle? If so don't worry, you just experienced your first empty gas bottle. As long as there is any liquid remaining, they read 800psi (500 cold). When that last drop is gone, the go from 800 to <100 psi VERY fast. Typically it's just a few hours, but if you're trying to carb a new keg it can be just minutes.

Now that you know it's empty, weight it and mark the tank. Next time you will know how much you have remaining.
__________________

Last edited by Philip1993; 08-21-2007 at 02:34 AM.
Philip1993 is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
C02 Leak eric_pwb Bottling/Kegging 10 11-07-2009 01:00 AM
co2 leak lowlife Bottling/Kegging 3 03-18-2009 04:12 PM
CO2 leak phooka Equipment/Sanitation 6 06-17-2008 02:02 AM
I've got a leak Professor Frink General Beer Discussion 11 05-31-2008 05:07 PM
CO2 Leak SoCalBrewing Bottling/Kegging 5 08-15-2007 01:27 PM