Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Weird Keg Problem - what could be wrong?

Reply
 
LinkBack Thread Tools
Old 10-06-2012, 04:29 AM   #1
morebeerpls
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: location
Posts: 15
Default Weird Keg Problem - what could be wrong?

So I have one particular corny keg which is always giving me problems. Holds pressure fine, but when I go to dispense, it acts like there is an air leak or that it is way over carbed. Basically all i get is head and a tiny bit of flat beer. Switching to another keg, or siphoning the beer off into a different keg makes it work fine. All same pressures.

Keg has been disassembled and all rubber replaced. replaced one of two popettes, and have swapped the poppets and drip tube with other kegs and it hasnt fixed it.

I am at a loss. I believe i have swapped all parts with other working kegs, and nothing seems to fix it. I even cut some length from the dip tube (1cm or so) as i thought maybe the dip tube was making contact with the bottom or side of the keg.

really annoying! I am about to turf this particular keg or use for parts. any ideas?

__________________
morebeerpls is offline
 
Reply With Quote Quick reply to this message
Old 10-06-2012, 04:38 AM   #2
BBL_Brewer
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
BBL_Brewer's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Kokomo, IN
Posts: 3,692
Liked 416 Times on 290 Posts
Likes Given: 307

Default

Have you swapped out the beer out post? Only thing you didn't mention already doing. Other than that I can't think of anything that would make it do that. Maybe you're just not holding your mouth right as my Grandpa used to say.

__________________
Slots Down Brewery
Stick with the plan....not the sparge.


Never Ending Liquid Yeast - How to Farm Yeast and Freeze it.

BBL_Brewer is offline
 
Reply With Quote Quick reply to this message
Old 10-06-2012, 04:45 AM   #3
raouliii
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
raouliii's Avatar
Recipes 
 
Join Date: Aug 2011
Location: Ponchatoula, LA
Posts: 758
Liked 61 Times on 54 Posts
Likes Given: 85

Default

A leak of the o-ring on the beer out dip tube would allow co2 to mix with the beer on the way out. Can you see bubbles in the beer line?

__________________
raouliii is offline
 
Reply With Quote Quick reply to this message
Old 10-06-2012, 04:51 AM   #4
DeafSmith
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
DeafSmith's Avatar
Recipes 
 
Join Date: Jan 2009
Location: Richardson, TX
Posts: 1,447
Liked 33 Times on 31 Posts
Likes Given: 9

Default

I know you said you swapped all the parts, but did that include the dip tube? Maybe it is something like this:

http://www.homebrewtalk.com/f35/trou...roblem-277979/

__________________
DeafSmith is offline
 
Reply With Quote Quick reply to this message
Old 10-06-2012, 04:53 AM   #5
Dan
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Dan's Avatar
Recipes 
 
Join Date: Oct 2010
Location: Makakilo, Hawaii
Posts: 5,940
Liked 1860 Times on 1141 Posts
Likes Given: 2638

Default

Agree with the above posts. Keg seals fine when no beer is flowing, problem is once it is part of the system you have the air come to play.

I'd look at the beer out plumbing. Every connection, fitting, bend, from out flow post to faucet. It must be in there somewhere.

edit: or the outflow tube like DeafSmith talks about. Something in the out "side" is causing the problem I'd imagine.

__________________
Dan is offline
 
Reply With Quote Quick reply to this message
Old 10-07-2012, 02:36 AM   #6
morebeerpls
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: location
Posts: 15
Default

yes i agree it should be on the out side. sigh. i think i did change the poppet inside, of course the rubber and I actually swapped the out tube and post with other good working keg. this is why i am at a loss.

But thanks! it luckily does the exact same thing with water, so next time it comes up in the keg rotation i will post back if i make any progress.

__________________
morebeerpls is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Weird 10 gal keg, ever seen this lid? JRems Bottling/Kegging 13 01-19-2013 02:59 AM
Weird Kegging / Flat Beer Problem luke2080 Bottling/Kegging 6 09-29-2012 12:29 AM
Keg with weird cap on it snwtricky Bottling/Kegging 3 01-23-2010 07:07 PM
Weird flavor from co2?? chode720 Bottling/Kegging 10 11-16-2009 02:02 AM
weird hopsalot Bottling/Kegging 7 02-14-2008 07:30 PM