Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Are these faucets safe to use?
Reply
 
LinkBack Thread Tools
Old 02-17-2014, 05:14 AM   #1
JAGLS
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2014
Posts: 2
Default Are these faucets safe to use?

Hello,

I am a new brewer, and have made about four batches, all extract. I have recently acquired a full size three tap kegerator. I have taken the tower apart and removed the faucets in order to install new beer lines. While inspecting the faucets I noticed the O-rings were dried out and cracking. I did find O-ring replacement kits (as these are standard American faucets) for $7.50. However, I also noticed what appears to be corrosion or tarnish on the inside of the faucets. I have attached photos. The photos are after cleaning with super grunge remover. My question is, are they safe to use, or will the tarnish and (what looks like rust on one of them), make the beer taste metallic? There is nothing I hate more than metallic beer. In addition to the tarnish, one of the faucets goose necks is bent. It looks like someone squeezed it with a pair of pliers. Will this cause foaming in the line?

Thank you for any advice.

faucet-breakdown.jpg   faucet-1.jpg   faucet-2a.jpg   faucet-3.jpg   bent-gooseneck.jpg  

__________________
JAGLS is offline
 
Reply With Quote Quick reply to this message
Old 02-17-2014, 05:39 AM   #2
barrooze
Feedback Score: 6 reviews
Recipes 
 
Join Date: Jan 2009
Location: Pearland, TX
Posts: 2,287
Liked 103 Times on 87 Posts
Likes Given: 133

Default

Those look to be standard chrome beer faucets. I believe the material they're made from is brass and are chromed. The acidity in beer can erode the chrome off a new faucet in a few to several weeks. As these are used faucets, the chrome looks to have been eroded away and you're left with the actual brass material. I'm sure if you dismantled the chrome faucets at your favorite watering hole, you'll find that they look exactly the same as what you've got here. I'm sure they're safe to drink from.

If you're concerned with your beer flaking away the chrome or brass coming into contact with your beer, you can always use stainless steel faucets, shanks, and tailpieces for your kegerator.

__________________
Kegged: Flanders Blonde, Saison (WLP585), Saison (Belle Saison), Mid-ABV Janet's Brown, Texas Brown Ale (A.K.A. The Creature) Primary: Octoberfest (ECY15), Sour Brown (ECY01) Souring: Oaked Brett Blended Saison On Deck: Pale ale, Ginger Beer On the Horizon: Epic Pale ale clone, Tonguesplitter Updated: 2014/08/23
Untappd: barrooze
barrooze is offline
 
Reply With Quote Quick reply to this message
Old 02-17-2014, 09:04 PM   #3
JAGLS
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2014
Posts: 2
Default

Thank You very much for the quick response. What you said makes perfect sense. I will go ahead and order the O-ring replacement kits.

__________________
JAGLS is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
(Home made) PBW - safe for glass? (Safe in general?) ubermick Equipment/Sanitation 66 03-21-2014 08:27 AM
Trade - I have two Ventmatic SS faucets to trade for two 425SS faucets JonW For Sale 3 08-14-2012 07:39 PM
For Sale - Faucets nate456789 For Sale 21 04-29-2012 04:29 AM
For Sale - WTB: Faucets pernox For Sale 7 04-17-2012 02:29 PM
What Faucets? Daver77 Bottling/Kegging 7 01-24-2012 04:38 PM