montigeau

Recipes 

I decided to put a Tee in my gas line so i could run two kegs with one Co2 tank. It seemed like a great idea. It works fine.

Now for the what if...

What if I need to force carb one keg (psi 30), but I have another keg on the same tank that is already carbed, and just needs to stay at 10-12 psi. In other words, with the Tee, it's impossible to set one tank to a different psi level than the other.

Unless anyone has any ideas??? Is there another way??

BierMuncher

Recipes 

Two solutions, one is cheap, one is free:

1) Simply disconnect the carb'd keg and let residual pressure push to serve. Maybe give periodic blast to replenish pressure. No...you will not loose carbonation to any noticeable degree during the short period you're carbong the other keg.

2) Buy and install inline valves for each of your lines. Simple shut off the valve to the serving keg whilst the other charges.

I have a four-way manifold with additional splitters. I charge my kegs at 30PSI for 48 hours, so temporarily shutting off pressure to my other kegs is no issue.

__________________
*******
Check Out My Rolling Kegerator

BierMuncher Tried & Trues:
Tits-Up IIPA (3-Time Medalist), Black Pearl Porter, Kona Pale Ale, Outer Limits IPA, Centennial Blonde (4.0%), Nierra Sevada (SNPA), SWMBO Slayer Belgian Blonde,

GilaMinumBeer

Recipes 

Now that you have tee'd is a perfect time to get a secondary in-line regulator. They are pretty cheap too. Got mine (Tap-Rite) for $15 at a local Beverage supply.

Multiple volumes with a single reg is do-able but a HUGE PITA involving removing disconnects, adjusting the reg, pressuring, and repeating.

Get another reg and save yourself the hassle. Or, just find a volumes CO2 that you like for everything.

conpewter

Recipes 

You could get a secondary regulator to have two different pressures. You also could just take the 12psi keg off the gas while you have the regulator set to 30 psi for the other keg, as long as you are not drinking a lot out of the 12 psi keg you should be ok (a couple pints)

Ah the other option is leave it all at 12psi and let the force carb keg carbonate over 1 week instead of 1-2 days.

__________________
"People should not be afraid of their governments. Governments should be afraid of their people." - V

Primary: Nothin
Secondary: Shady Lord RIS, Water to Barleywine, Pumpkin wine, burnt mead
Kegged: Crappy infected mild
Bottles: Apfelwein, 999 Barleywine, Oatmeal Stout, Robust Porter, Robust smoked porter, Simcoe Smash

montigeau

Recipes 

Ok, not a problem with taking one off the line, if I have to. I wasn't sure if that would work or not.

I actually have another regulator and another Co2 tank, but I think you're talking about something different when you say "Secondary Regulator", right?

Previously, I was using both Co2 tanks, with their own regulators running two different kegs in one fridge. The idea behind the Tee was to make more room in my fridge and make things simpler.

jcdillin

Recipes 

I run three kegs off one one reg and a 3 way tee. When i'm force carbing I just take the other two off the gas till i'm done.

Yeah a secondary regulator is usually split off one tank and gives you two different pressures.

__________________
Current Rig
4.5KW E-HLT
5.5KW E-Kettle
MasterFlex Peristaltic Primary Pump
March Secondary Pump
Therminator for Chilling
Planned
Automated Grain Drop
Automated Hop Dropper

System controlled via BrewTroller