Newest Threads

**Photopilot** · 07-30-2012, 01:46 AM

Quote:

Originally Posted by irishbrew26

just built this guy today. Have to get a new keg cause the one i bought is 2 inches too tall. Can you guess what my apartment # is

Maybe the keg you bought is 2 inches too short.

There are two kinds of Cornie keg. The pin locks are wider and narrower than ball lock and may fit into your fridge.

ajwillys · 07-30-2012, 02:23 PM

Quote:

Originally Posted by irishbrew26

just built this guy today. Have to get a new keg cause the one i bought is 2 inches too tall. Can you guess what my apartment # is

From your comment I would say 312, but I was thinking that was a goose island 312 tap? Are you just that lucky that both are true?

ShortSpoonBrew · 07-30-2012, 07:45 PM

Quote:

Originally Posted by Photopilot

I am pretty sure i have posted before on this thread with my setup. But it has moved across country since then and been updated just recently. I have made a new test tube rack to represent all the beverages present. Also found a 24" long SS drip tray to catch all the dripping.

Since this picture I have filled the #3 spot. Current line up is

[*]Rasp Wheat[*]ApfelWein[*]Graff[*]KiltedCat Kilt Lifter[*]CocoPuff Stout[*]Stolen Property Porter[*]Smoked Porter[*]Carbonated Carlsbad Spring Water

Currently I am out of beer though=No IPA or IIPA on tap.

The other photos are the Huge mini fridge for bottles and mixers to the left of the Keezer. The liquor table to the right. The entire room which is an enclosed porch that it resides in, in Southern California which is a major upgrade from the basement in Utah where the keezer and I used to reside.

Hey since you're all settled now, do you still plan to move the water tap to the side and add the stout tap?

**Brickout** · 07-31-2012, 02:24 AM

Here's my pallet keezer.

You can read about the build here.

**arturo7** · 07-31-2012, 02:56 AM

Quote:

Originally Posted by Brickout

Here's my pallet keezer.

I like it!

N20junkie · 07-31-2012, 02:57 AM

Im new here, but have been lurking for a while. I fabricate race cars as a hobby, and wanted a keezer to go with that theme. Its not finished, but you get the idea.

Its all 304 SS, and i brush finished the tubes before welding to show off the cool color stainless turns after welding. There are 4 access caps behind each tap, and the tube is insulated. The end will get a nice cap, thats on the bench to be finished tomorrow. I also added a fan for the tower to help keep it cool. The computer fan isn't enough, eventually it will need a squirl cage fan for higher flow. I also made the compact gas manifold. The drip tray is siliconed to the top, and i welded a drain stem to it that goes through the lid for draining into a container inside the keezer.

I will get some better pictures soon. I am going to make a wheeled frame for it with casters as well.

**Hackwood** · 07-31-2012, 03:11 PM

That's not cool!! I just drooled on my phone?!?! o_O

3RiverBrewer · 07-31-2012, 03:33 PM

Spent a lot of time on this.. the kegerator is actually down in my basement with the lines running up.. its should be fully hooked up today if I get the time..

**Darwin18** · 07-31-2012, 03:44 PM

Very nice, I like your tile work.

**Doed** · 07-31-2012, 08:01 PM

Here is mine.